IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v61y2013icp565-574.html
   My bibliography  Save this article

Failure pressure of a pressurized girth-welded super duplex stainless steel pipe in reverse osmosis desalination plants

Author

Listed:
  • Lee, Chin-Hyung
  • Chang, Kyong-Ho

Abstract

Pressurized super duplex stainless steel grade S32750 pipe is the most important element in SWRO (Sea Water Reverse Osmosis) plants. This paper presents FE (finite element) analyses to investigate the residual stress distributions produced by the girth welding of the thin-walled super duplex stainless steel pipe and the failure pressure of the girth-welded super duplex steel pipe under internal pressure. FE simulation of the girth welding process was first performed to predict the weld-induced residual stresses employing a sequentially coupled three-dimensional (3-D) thermo-mechanical FE formulation. The residual stresses were then incorporated into the 3-D elastic-plastic FE analyses to explore the failure behavior of the girth-welded super duplex steel pipe subjected to superimposed internal pressure. GPD (Global Plastic Deformation) was used as an indicator of the failure pressure. The FE results have shown that the failure of the girth-welded thin-walled super duplex stainless steel pipe under internal pressure occurs when the effective stress approaches at a certain level which is much lower than the ultimate tensile strength and the burst pressure is weakly influenced by the weld-induced residual stresses.

Suggested Citation

  • Lee, Chin-Hyung & Chang, Kyong-Ho, 2013. "Failure pressure of a pressurized girth-welded super duplex stainless steel pipe in reverse osmosis desalination plants," Energy, Elsevier, vol. 61(C), pages 565-574.
    • Handle: RePEc:eee:energy:v:61:y:2013:i:c:p:565-574
    DOI: 10.1016/j.energy.2013.08.056
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544213007457
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.08.056?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Narayan, G. Prakash & McGovern, Ronan K. & Zubair, Syed M. & Lienhard, John H., 2012. "High-temperature-steam-driven, varied-pressure, humidification-dehumidification system coupled with reverse osmosis for energy-efficient seawater desalination," Energy, Elsevier, vol. 37(1), pages 482-493.
    2. Ozaki, Masahiko & Fujioka, Yuichi & Takeuchi, Kazuhisa & Sonoda, Keisuke & Tsukamoto, Osamu, 1997. "Length of vertical pipes for deep-ocean sequestration of CO2 in rough seas," Energy, Elsevier, vol. 22(2), pages 229-237.
    3. Stoppato, A. & Mirandola, A. & Meneghetti, G. & Lo Casto, E., 2012. "On the operation strategy of steam power plants working at variable load: Technical and economic issues," Energy, Elsevier, vol. 37(1), pages 228-236.
    4. Alhazmy, Majed M., 2011. "Multi stage flash desalination plant with brine–feed mixing and cooling," Energy, Elsevier, vol. 36(8), pages 5225-5232.
    5. Jiang, Wenchun & Fan, Qinshan & Gong, Jianming, 2010. "Optimization of welding joint between tower and bottom flange based on residual stress considerations in a wind turbine," Energy, Elsevier, vol. 35(1), pages 461-467.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Su, H. & Wu, C.S. & Pittner, A. & Rethmeier, M., 2014. "Thermal energy generation and distribution in friction stir welding of aluminum alloys," Energy, Elsevier, vol. 77(C), pages 720-731.
    2. Liu, ZuMing & Fang, YueXiao & Chen, ShiYu & Zhang, Tao & Lv, ZhenYu & Luo, Zhen, 2019. "Focusing cathode tip characteristics in cooling tungsten," Energy, Elsevier, vol. 167(C), pages 982-993.
    3. Su, Yue & Li, Jingfa & Yu, Bo & Zhao, Yanlin & Yao, Jun, 2021. "Fast and accurate prediction of failure pressure of oil and gas defective pipelines using the deep learning model," Reliability Engineering and System Safety, Elsevier, vol. 216(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Andrzej Rusin & Martyna Tomala & Henryk Łukowicz & Grzegorz Nowak & Wojciech Kosman, 2021. "On-Line Control of Stresses in the Power Unit Pressure Elements Taking Account of Variable Heat Transfer Conditions," Energies, MDPI, vol. 14(15), pages 1-21, August.
    2. Su, H. & Wu, C.S. & Pittner, A. & Rethmeier, M., 2014. "Thermal energy generation and distribution in friction stir welding of aluminum alloys," Energy, Elsevier, vol. 77(C), pages 720-731.
    3. Martyna Tomala & Andrzej Rusin, 2022. "Risk-Based Operation and Maintenance Planning of Steam Turbine with the Long In-Service Time," Energies, MDPI, vol. 15(14), pages 1-17, July.
    4. Alhazmy, Majed M., 2014. "Economic and thermal feasibility of multi stage flash desalination plant with brine–feed mixing and cooling," Energy, Elsevier, vol. 76(C), pages 1029-1035.
    5. Alobaid, Falah & Karner, Karl & Belz, Jörg & Epple, Bernd & Kim, Hyun-Gee, 2014. "Numerical and experimental study of a heat recovery steam generator during start-up procedure," Energy, Elsevier, vol. 64(C), pages 1057-1070.
    6. Ruiz de la Hermosa González-Carrato, Raúl & García Márquez, Fausto Pedro & Dimlaye, Vichaar, 2015. "Maintenance management of wind turbines structures via MFCs and wavelet transforms," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 472-482.
    7. Gholizadeh, Towhid & Vajdi, Mohammad & Rostamzadeh, Hadi, 2020. "A new trigeneration system for power, cooling, and freshwater production driven by a flash-binary geothermal heat source," Renewable Energy, Elsevier, vol. 148(C), pages 31-43.
    8. Zhang, Hao & Lai, Yanhua & Yang, Xiao & Li, Chang & Dong, Yong, 2022. "Non-evaporative solvent extraction technology applied to water and heat recovery from low-temperature flue gas: Parametric analysis and feasibility evaluation," Energy, Elsevier, vol. 244(PB).
    9. Li, Yan & Feng, Yanhui & Zhang, Xinxin & Wu, Chuansong, 2014. "Energy propagation in plasma arc welding with keyhole tracking," Energy, Elsevier, vol. 64(C), pages 1044-1056.
    10. Blanco, Jesús M. & Vazquez, L. & Peña, F., 2012. "Investigation on a new methodology for thermal power plant assessment through live diagnosis monitoring of selected process parameters; application to a case study," Energy, Elsevier, vol. 42(1), pages 170-180.
    11. McGovern, Ronan K. & Thiel, Gregory P. & Prakash Narayan, G. & Zubair, Syed M. & Lienhard, John H., 2013. "Performance limits of zero and single extraction humidification-dehumidification desalination systems," Applied Energy, Elsevier, vol. 102(C), pages 1081-1090.
    12. Martyna Tomala & Andrzej Rusin & Adam Wojaczek, 2020. "Risk-Based Planning of Diagnostic Testing of Turbines Operating with Increased Flexibility," Energies, MDPI, vol. 13(13), pages 1-16, July.
    13. Lee, Sangkeum & Hong, Junhee & Har, Dongsoo, 2016. "Jointly optimized control for reverse osmosis desalination process with different types of energy resource," Energy, Elsevier, vol. 117(P1), pages 116-130.
    14. Choi, Soon-Ho, 2017. "Thermal type seawater desalination with barometric vacuum and solar energy," Energy, Elsevier, vol. 141(C), pages 1332-1349.
    15. Jesse G. Wales & Alexander J. Zolan & William T. Hamilton & Alexandra M. Newman & Michael J. Wagner, 2023. "Combining simulation and optimization to derive operating policies for a concentrating solar power plant," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 45(1), pages 119-150, March.
    16. Hadi Rostamzadeh & Saeed Rostami & Majid Amidpour & Weifeng He & Dong Han, 2021. "Seawater Desalination via Waste Heat Recovery from Generator of Wind Turbines: How Economical Is It to Use a Hybrid HDH-RO Unit?," Sustainability, MDPI, vol. 13(14), pages 1-40, July.
    17. Chen, Q. & Ja, M. Kum & Li, Y. & Chua, K.J., 2018. "Energy, economic and environmental (3E) analysis and multi-objective optimization of a spray-assisted low-temperature desalination system," Energy, Elsevier, vol. 151(C), pages 387-401.
    18. Vazquez, Luis & Blanco, Jesús María & Ramis, Rolando & Peña, Francisco & Diaz, David, 2015. "Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring," Energy, Elsevier, vol. 93(P1), pages 923-944.
    19. Taler, Jan & Węglowski, Bohdan & Taler, Dawid & Sobota, Tomasz & Dzierwa, Piotr & Trojan, Marcin & Madejski, Paweł & Pilarczyk, Marcin, 2015. "Determination of start-up curves for a boiler with natural circulation based on the analysis of stress distribution in critical pressure components," Energy, Elsevier, vol. 92(P1), pages 153-159.
    20. Qureshi, Bilal Ahmed & Zubair, Syed M., 2015. "Exergetic analysis of a brackish water reverse osmosis desalination unit with various energy recovery systems," Energy, Elsevier, vol. 93(P1), pages 256-265.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:61:y:2013:i:c:p:565-574. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.