IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v314y2025ics0360544224037198.html
   My bibliography  Save this article

Hydrogen cultivation through an integrated ranking cycle and proton exchange membrane with an evacuated tube collector powered by hybrid nanofluids

Author

Listed:
  • Sathish, T.
  • Giri, Jayant
  • Ağbulut, Ümit

Abstract

This study integrates nanotechnology into renewable energy systems representing innovation in infrastructure development, crucial for sustainable industrial growth. The study addresses a critical need in renewable energy technology: enhancing hydrogen production rates through more efficient integration of solar thermal systems with Proton Exchange Membrane (PEM) electrolyzers and aligning the alignment with several Sustainable Development Goals 7, 9, and 13. By improving the efficiency of hydrogen production from renewable sources like solar energy, the study contributes to achieving sustainable energy solutions. The primary aim of the study is to investigate and demonstrate the efficacy of integrating an Evacuated Tube Solar Collector (ETSC) with a PEM electrolyzer, enhanced by nanofluids. Specifically, the study explores how nanotechnology can improve thermal performance and subsequently increase hydrogen production rates, particularly through Multi-walled carbon nanotubes (MWCNT), Magnesium oxide (MgO), and their hybrid. The nanoparticles such as MWCNT, and MgO were chosen at 0.1 % concentration and the hybrid was 0.05 % of each nanoparticle was chosen. The ranking cycle comprises the low, and high-pressure turbine for PEM electrolyzer. The result of the hybrid nanofluid in the ETSC circuit shows appreciable thermal performance than base fluid and standalone nanofluid. The peak outlet temperature by nanofluid is about 65.8 °C, 71.0 °C, and 78.5 °C by MWCNT, MgO, and hybrid nanofluid which is higher than Thermal oil respectively. The peak collector efficiency enhancement is about 80.5 % by integrating a hybrid nanofluid in an ETSC circuit. Similarly, the exergy efficiency was increased from 12.4 % to 36.8 by using a hybrid nanofluid in the ETSC circuit. The peak PEM electrolyzes energy, and exergy efficiency is about 44.4 %, and 10.5 % through the use of hybrid MWCNT/MgO nanofluid. The hydrogen production rate was increased from 6.8 % to 29.7 % when the hybrid nanofluid was used.

Suggested Citation

  • Sathish, T. & Giri, Jayant & Ağbulut, Ümit, 2025. "Hydrogen cultivation through an integrated ranking cycle and proton exchange membrane with an evacuated tube collector powered by hybrid nanofluids," Energy, Elsevier, vol. 314(C).
    • Handle: RePEc:eee:energy:v:314:y:2025:i:c:s0360544224037198
    DOI: 10.1016/j.energy.2024.133941
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224037198
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.133941?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zeng, Jia & Xuan, Yimin, 2018. "Enhanced solar thermal conversion and thermal conduction of MWCNT-SiO2/Ag binary nanofluids," Applied Energy, Elsevier, vol. 212(C), pages 809-819.
    2. Abu Shadate Faisal Mahamude & Muhamad Kamal Kamarulzaman & Wan Sharuzi Wan Harun & Kumaran Kadirgama & Devarajan Ramasamy & Kaniz Farhana & Rosli Abu Bakar & Talal Yusaf & Sivarao Subramanion & Belal , 2022. "A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids," Energies, MDPI, vol. 15(4), pages 1-26, February.
    3. Shukla, Ashish & Nkwetta, Dan Nchelatebe & Cho, Y.J. & Stevenson, Vicki & Jones, Phil, 2012. "A state of art review on the performance of transpired solar collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 3975-3985.
    4. Temiz, Mert & Dincer, Ibrahim, 2021. "Concentrated solar driven thermochemical hydrogen production plant with thermal energy storage and geothermal systems," Energy, Elsevier, vol. 219(C).
    5. Sabiha, M.A. & Saidur, R. & Mekhilef, Saad & Mahian, Omid, 2015. "Progress and latest developments of evacuated tube solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1038-1054.
    6. Rahman, Abidur & Farrok, Omar & Haque, Md Mejbaul, 2022. "Environmental impact of renewable energy source based electrical power plants: Solar, wind, hydroelectric, biomass, geothermal, tidal, ocean, and osmotic," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rehman, Tauseef-ur & Park, Cheol Woo, 2024. "Advances in nanofluids for tubular heat exchangers: Thermal performance, environmental effects, economics and outlook," Energy, Elsevier, vol. 308(C).
    2. Luo, Rongrong & Wang, Liuwei & Yu, Wei & Shao, Feilong & Shen, Haikuo & Xie, Huaqing, 2023. "High energy storage density titanium nitride-pentaerythritol solid–solid composite phase change materials for light-thermal-electric conversion," Applied Energy, Elsevier, vol. 331(C).
    3. Ehab AlShamaileh & Iessa Sabbe Moosa & Heba Al-Fayyad & Bashar Lahlouh & Hussein A. Kazem & Qusay Abu-Afifeh & Bety S. Al-Saqarat & Muayad Esaifan & Imad Hamadneh, 2022. "Performance Comparison and Light Reflectance of Al, Cu, and Fe Metals in Direct Contact Flat Solar Heating Systems," Energies, MDPI, vol. 15(23), pages 1-15, November.
    4. Zhang, Xueyan & Gao, Teng & Liu, Yang & Chen, Fei, 2023. "Construction and concentrating performance of a critically truncated compound parabolic concentrator without light escape," Energy, Elsevier, vol. 269(C).
    5. Peci López, F. & Ruiz de Adana Santiago, M., 2015. "Sensitivity study of an opaque ventilated façade in the winter season in different climate zones in Spain," Renewable Energy, Elsevier, vol. 75(C), pages 524-533.
    6. Yadav, Deepak & Banerjee, Rangan, 2022. "Thermodynamic and economic analysis of the solar carbothermal and hydrometallurgy routes for zinc production," Energy, Elsevier, vol. 247(C).
    7. Shafieian, Abdellah & Khiadani, Mehdi & Nosrati, Ataollah, 2018. "A review of latest developments, progress, and applications of heat pipe solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 95(C), pages 273-304.
    8. Juanicó, Luis E. & Di Lalla, Nicolás & González, Alejandro D., 2017. "Full thermal-hydraulic and solar modeling to study low-cost solar collectors based on a single long LDPE hose," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 187-195.
    9. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    10. Fei Cao & Jiarui Pang & Xianzhe Gu & Miaomiao Wang & Yanqin Shangguan, 2023. "Performance Simulation of Solar Trough Concentrators: Optical and Thermal Comparisons," Energies, MDPI, vol. 16(4), pages 1-18, February.
    11. Zhang, Xingxing & Shen, Jingchun & Lu, Yan & He, Wei & Xu, Peng & Zhao, Xudong & Qiu, Zhongzhu & Zhu, Zishang & Zhou, Jinzhi & Dong, Xiaoqiang, 2015. "Active Solar Thermal Facades (ASTFs): From concept, application to research questions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 32-63.
    12. M. Ehyaei & M. Kasaeian & Stéphane Abanades & Armin Razmjoo & Hamed Afshari & Marc Rosen & Biplab Das, 2023. "Natural gas‐fueled multigeneration for reducing environmental effects of brine and increasing product diversity: Thermodynamic and economic analyses," Post-Print hal-04113893, HAL.
    13. Chen, Gong & Tang, Yong & Duan, Longhua & Tang, Heng & Zhong, Guisheng & Wan, Zhenping & Zhang, Shiwei & Fu, Ting, 2020. "Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors," Renewable Energy, Elsevier, vol. 146(C), pages 2234-2242.
    14. Xu, Yanyan & Xue, Yanqin & Qi, Hong & Cai, Weihua, 2021. "An updated review on working fluids, operation mechanisms, and applications of pulsating heat pipes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    15. Li, Yuxuan & Li, Hongkun & Liu, Weiqun & Zhu, Qiao, 2024. "Optimization of membrane thickness for proton exchange membrane electrolyzer considering hydrogen production efficiency and hydrogen permeation phenomenon," Applied Energy, Elsevier, vol. 355(C).
    16. Wang, Linhao & Lei, Dongqiang & Ren, Puning & Lv, Yue & Luo, Nengchao & Wang, Zhifeng, 2024. "Experimental study on concentrated light photothermal catalytic glycerol for hydrogen production using a novel linear concentrated light flow reactor," Renewable Energy, Elsevier, vol. 231(C).
    17. Li, Qiong & Gao, Wenfeng & Lin, Wenxian & Liu, Tao & Zhang, Yougang & Ding, Xiang & Huang, Xiaoqiao & Liu, Wuming, 2020. "Experiment and simulation study on convective heat transfer of all-glass evacuated tube solar collector," Renewable Energy, Elsevier, vol. 152(C), pages 1129-1139.
    18. Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Alawadhi, Hussain & Elsaid, Khaled & Wilberforce, Tabbi & Olabi, A.G., 2021. "Graphitic carbon nitride/carbon brush composite as a novel anode for yeast-based microbial fuel cells," Energy, Elsevier, vol. 221(C).
    19. Belekoukia, Meltiani & Kalamaras, Evangelos & Tan, Jeannie Z.Y. & Vilela, Filipe & Garcia, Susana & Maroto-Valer, M. Mercedes & Xuan, Jin, 2019. "Continuous flow-based laser-assisted plasmonic heating: A new approach for photothermal energy conversion and utilization," Applied Energy, Elsevier, vol. 247(C), pages 517-524.
    20. Zukowski, M., 2015. "Experimental investigations of thermal and flow characteristics of a novel microjet air solar heater," Applied Energy, Elsevier, vol. 142(C), pages 10-20.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:314:y:2025:i:c:s0360544224037198. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.