IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v212y2020ics0360544220316911.html
   My bibliography  Save this article

Design of optimal heat exchanger network with fluctuation probability using break-even analysis

Author

Listed:
  • Hafizan, Ainur Munirah
  • Wan Alwi, Sharifah Rafidah
  • Manan, Zainuddin Abd
  • Klemeš, Jiří Jaromír
  • Abd Hamid, Mohd Kamaruddin

Abstract

Heat exchanger network (HEN), which is designed to achieve the maximum energy recovery (MER) involves the integration and interactions of multiple process streams. In a plant, the system operation may experience various disturbances such as changes in supply temperature and flowrates. Small disturbances on one stream can affect other connecting streams. To manage these disturbances, the process to process and utility heat exchangers with bypass streams installation are typically overdesigned, leading to higher capital investment. This study presents the cost optimisation of flexible MER HEN design which considers the fluctuation probability using Break-Even Analysis (BEA). Stream data is extracted for the Pinch study and assessment for flexibility and MER was performed. The MER heat exchanger maximum size (MER-HEM) able to handle the most critical supply temperature fluctuations while minimising the utility consumption is calculated. However, the overdesign factor can affect the total annualised cost (TAC) at a certain probability of fluctuation occurrence. Besides that, the fluctuations experienced by the stream can result in the utility increasing or decreasing. Therefore, the MER heat exchanger original size (MER-HEO) is favoured when the fluctuation resulted in the utility cost increasing. The BEA is performed to determine the probability that results in high savings of the TAC and developed an optimal HEN design of MER-HEM or MER-HEO. The break-even point (BEP) from BEA indicate the exact fluctuation probability at which the TAC of MER-HEM and MER-HEO is the same. A case study with fluctuation probability over one-year operation is used to demonstrate the methodology. Application of the proposed methodology on the case study shows that the optimum size of heat exchanger can be determined and the additional savings of TAC can be achieved.

Suggested Citation

  • Hafizan, Ainur Munirah & Wan Alwi, Sharifah Rafidah & Manan, Zainuddin Abd & Klemeš, Jiří Jaromír & Abd Hamid, Mohd Kamaruddin, 2020. "Design of optimal heat exchanger network with fluctuation probability using break-even analysis," Energy, Elsevier, vol. 212(C).
    • Handle: RePEc:eee:energy:v:212:y:2020:i:c:s0360544220316911
    DOI: 10.1016/j.energy.2020.118583
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220316911
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118583?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Christian Langner & Elin Svensson & Simon Harvey, 2020. "A Framework for Flexible and Cost-Efficient Retrofit Measures of Heat Exchanger Networks," Energies, MDPI, vol. 13(6), pages 1-24, March.
    2. Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Walmsley, Timothy G. & Jia, Xuexiu, 2018. "New directions in the implementation of Pinch Methodology (PM)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 439-468.
    3. Pavão, Leandro V. & Miranda, Camila B. & Costa, Caliane B.B. & Ravagnani, Mauro A.S.S., 2018. "Efficient multiperiod heat exchanger network synthesis using a meta-heuristic approach," Energy, Elsevier, vol. 142(C), pages 356-372.
    4. Orosz, Ákos & Kovács, Zoltán & Friedler, Ferenc, 2019. "Synthesis of heat integrated processing systems taking into account reliability," Energy, Elsevier, vol. 181(C), pages 214-225.
    5. Lal, Nathan S. & Atkins, Martin J. & Walmsley, Timothy G. & Walmsley, Michael R.W. & Neale, James R., 2019. "Insightful heat exchanger network retrofit design using Monte Carlo simulation," Energy, Elsevier, vol. 181(C), pages 1129-1141.
    6. Ainur Munirah Hafizan & Jiří Jaromír Klemeš & Sharifah Rafidah Wan Alwi & Zainuddin Abdul Manan & Mohd Kamaruddin Abd Hamid, 2019. "Temperature Disturbance Management in a Heat Exchanger Network for Maximum Energy Recovery Considering Economic Analysis," Energies, MDPI, vol. 12(4), pages 1-30, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhao, Liwen & Liu, Guilian, 2022. "Dynamic coupling of reactor and heat exchanger network considering catalyst deactivation," Energy, Elsevier, vol. 260(C).
    2. Seferlis, Panos & Varbanov, Petar Sabev & Papadopoulos, Athanasios I. & Chin, Hon Huin & Klemeš, Jiří Jaromír, 2021. "Sustainable design, integration, and operation for energy high-performance process systems," Energy, Elsevier, vol. 224(C).
    3. Zhang, Sheng & Ocłoń, Paweł & Klemeš, Jiří Jaromír & Michorczyk, Piotr & Pielichowska, Kinga & Pielichowski, Krzysztof, 2022. "Renewable energy systems for building heating, cooling and electricity production with thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    4. Ulyev, Leonid & Boldyryev, Stanislav & Kuznetsov, Maxim, 2023. "Investigation of process stream systems for targeting energy-capital trade-offs of a heat recovery network," Energy, Elsevier, vol. 263(PD).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Christian Langner & Elin Svensson & Simon Harvey, 2020. "A Framework for Flexible and Cost-Efficient Retrofit Measures of Heat Exchanger Networks," Energies, MDPI, vol. 13(6), pages 1-24, March.
    2. Klemeš, Jiří Jaromír & Wang, Qiu-Wang & Varbanov, Petar Sabev & Zeng, Min & Chin, Hon Huin & Lal, Nathan Sanjay & Li, Nian-Qi & Wang, Bohong & Wang, Xue-Chao & Walmsley, Timothy Gordon, 2020. "Heat transfer enhancement, intensification and optimisation in heat exchanger network retrofit and operation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 120(C).
    3. Pavão, Leandro V. & Santos, Lucas F. & Oliveira, Cássia M. & Cruz, Antonio J.G. & Ravagnani, Mauro A.S.S. & Costa, Caliane B.B., 2023. "Flexible heat integration system in first-/second-generation ethanol production via screening pinch-based method and multiperiod model," Energy, Elsevier, vol. 271(C).
    4. Yee Van Fan & Zorka Novak Pintarič & Jiří Jaromír Klemeš, 2020. "Emerging Tools for Energy System Design Increasing Economic and Environmental Sustainability," Energies, MDPI, vol. 13(16), pages 1-25, August.
    5. Orosz, Ákos & Friedler, Ferenc, 2020. "Multiple-solution heat exchanger network synthesis for enabling the best industrial implementation," Energy, Elsevier, vol. 208(C).
    6. Walden, Jasper V.M. & Wellig, Beat & Stathopoulos, Panagiotis, 2023. "Heat pump integration in non-continuous industrial processes by Dynamic Pinch Analysis Targeting," Applied Energy, Elsevier, vol. 352(C).
    7. Tan, R.R. & Aviso, K.B. & Ng, D.K.S., 2019. "Optimization models for financing innovations in green energy technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    8. Li, Nianqi & Klemeš, Jiří Jaromír & Sunden, Bengt & Wu, Zan & Wang, Qiuwang & Zeng, Min, 2022. "Heat exchanger network synthesis considering detailed thermal-hydraulic performance: Methods and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    9. Kong, Karen Gah Hie & How, Bing Shen & Lim, Juin Yau & Leong, Wei Dong & Teng, Sin Yong & Ng, Wendy Pei Qin & Moser, Irene & Sunarso, Jaka, 2022. "Shaving electric bills with renewables? A multi-period pinch-based methodology for energy planning," Energy, Elsevier, vol. 239(PD).
    10. Nayak-Luke, Richard & Bañares-Alcántara, René & Collier, Sam, 2021. "Quantifying network flexibility requirements in terms of energy storage," Renewable Energy, Elsevier, vol. 167(C), pages 869-882.
    11. Xu, Jiacheng & Liang, Yingzong & Luo, Xianglong & Chen, Jianyong & Yang, Zhi & Chen, Ying, 2023. "Towards cost-effective osmotic power harnessing: Mass exchanger network synthesis for multi-stream pressure-retarded osmosis systems," Applied Energy, Elsevier, vol. 330(PA).
    12. Jiří Jaromír Klemeš & Petar Sabev Varbanov & Paweł Ocłoń & Hon Huin Chin, 2019. "Towards Efficient and Clean Process Integration: Utilisation of Renewable Resources and Energy-Saving Technologies," Energies, MDPI, vol. 12(21), pages 1-32, October.
    13. Trafczynski, Marian & Markowski, Mariusz & Urbaniec, Krzysztof, 2019. "Energy saving potential of a simple control strategy for heat exchanger network operation under fouling conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 355-364.
    14. Ainur Munirah Hafizan & Jiří Jaromír Klemeš & Sharifah Rafidah Wan Alwi & Zainuddin Abdul Manan & Mohd Kamaruddin Abd Hamid, 2019. "Temperature Disturbance Management in a Heat Exchanger Network for Maximum Energy Recovery Considering Economic Analysis," Energies, MDPI, vol. 12(4), pages 1-30, February.
    15. Matthias Rathjens & Georg Fieg, 2019. "Cost-Optimal Heat Exchanger Network Synthesis Based on a Flexible Cost Functions Framework," Energies, MDPI, vol. 12(5), pages 1-18, February.
    16. Abdelouadoud, Yasmina & Lucas, Edward & Krummenacher, Pierre & Olsen, Donald & Wellig, Beat, 2019. "Batch process heat storage integration: A simple and effective graphical approach," Energy, Elsevier, vol. 185(C), pages 804-818.
    17. Yin, Linfei & Lu, Yuejiang, 2021. "Expandable deep width learning for voltage control of three-state energy model based smart grids containing flexible energy sources," Energy, Elsevier, vol. 226(C).
    18. Fan, Yee Van & Klemeš, Jiří Jaromír & Walmsley, Timothy Gordon & Perry, Simon, 2019. "Minimising energy consumption and environmental burden of freight transport using a novel graphical decision-making tool," Renewable and Sustainable Energy Reviews, Elsevier, vol. 114(C), pages 1-1.
    19. Zirngast, Klavdija & Kravanja, Zdravko & Novak Pintarič, Zorka, 2021. "An improved algorithm for synthesis of heat exchanger network with a large number of uncertain parameters," Energy, Elsevier, vol. 233(C).
    20. Lee, Ming Kwee & Hashim, Haslenda & Ho, Wai Shin & Muis, Zarina Ab & Yunus, Nor Alafiza & Xu, Huijin, 2020. "Integrated spatial and pinch analysis of optimal industrial energy supply mix with consideration of BioCNG derived from palm oil mill effluent," Energy, Elsevier, vol. 209(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:212:y:2020:i:c:s0360544220316911. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.