IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v311y2022ics0306261922001441.html
   My bibliography  Save this article

Self-powered wireless sensing system driven by daily ambient temperature energy harvesting

Author

Listed:
  • Thi Kim Tuoi, Truong
  • Van Toan, Nguyen
  • Ono, Takahito

Abstract

This work demonstrates a self-powered wireless IoT sensing system driven by daily ambient temperature energy harvesting. A novel approach using a thermoelectric generator (TEG) which harvests thermal energy from daily ambient temperature fluctuations into electricity as a power source for wireless IoT devices is proposed and investigated. A harvested temperature difference across the TEG is created by employing a phase change material (PCM) which allows the temperature value to be maintained near the melting point at the phase transition during the ambient temperature fluctuations. Experimental results indicated that the harvested temperature differences are 10 °C and 5 °C for 300 ml and 30 ml of PCM, respectively, during the ambient temperature variations from 5 °C to 25 °C. By utilizing the ambient temperature fluctuations between day and night times, an average maximum output power of TEG measured for 3 days is 340 µW and DC-DC electronic conversion efficiency is 28.3%. The total storable energy of approximately 1.46 J for a day is estimated. A capacitor as an energy storage unit could be fully charged and its usable energy is calculated at 0.686 J. The current consumption of 2.1 µA for every transmit cycle is estimated. A self-powered wireless IoT sensing system driven by realistic ambient temperature variations able to sense the ambient temperature as well as the ambient humidity and transmit to a computer via RF communication is demonstrated successfully.

Suggested Citation

  • Thi Kim Tuoi, Truong & Van Toan, Nguyen & Ono, Takahito, 2022. "Self-powered wireless sensing system driven by daily ambient temperature energy harvesting," Applied Energy, Elsevier, vol. 311(C).
    • Handle: RePEc:eee:appene:v:311:y:2022:i:c:s0306261922001441
    DOI: 10.1016/j.apenergy.2022.118679
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922001441
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2022.118679?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, Yong Jun & Gu, Hyun Mo & Kim, Choong Sun & Choi, Hyeongdo & Lee, Gyusoup & Kim, Seongho & Yi, Kevin K. & Lee, Sang Gug & Cho, Byung Jin, 2018. "High-performance self-powered wireless sensor node driven by a flexible thermoelectric generator," Energy, Elsevier, vol. 162(C), pages 526-533.
    2. ., 2021. "Large industrial enterprises," Chapters, in: The Political Economy of Iraq, chapter 10, pages 186-205, Edward Elgar Publishing.
    3. ., 2021. "Rescuing the auto industry," Chapters, in: The Global Rise of the Modern Plug-In Electric Vehicle, chapter 7, pages 212-247, Edward Elgar Publishing.
    4. Gyusun Hwang & Jeongcheol Lee & Jinwoo Park & Tai-Woo Chang, 2017. "Developing performance measurement system for Internet of Things and smart factory environment," International Journal of Production Research, Taylor & Francis Journals, vol. 55(9), pages 2590-2602, May.
    5. Dehghani-Sanij, A.R. & Tharumalingam, E. & Dusseault, M.B. & Fraser, R., 2019. "Study of energy storage systems and environmental challenges of batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 104(C), pages 192-208.
    6. Sharma, Atul & Tyagi, V.V. & Chen, C.R. & Buddhi, D., 2009. "Review on thermal energy storage with phase change materials and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(2), pages 318-345, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Daniela Charris & Diego Gomez & Angie Rincon Ortega & Mauricio Carmona & Mauricio Pardo, 2020. "A Thermoelectric Energy Harvesting Scheme with Passive Cooling for Outdoor IoT Sensors," Energies, MDPI, vol. 13(11), pages 1-25, June.
    2. Mingli Li & Guoqing Gui & Zhibin Lin & Long Jiang & Hong Pan & Xingyu Wang, 2018. "Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings," Sustainability, MDPI, vol. 10(8), pages 1-23, July.
    3. Sharif, M.K. Anuar & Al-Abidi, A.A. & Mat, S. & Sopian, K. & Ruslan, M.H. & Sulaiman, M.Y. & Rosli, M.A.M., 2015. "Review of the application of phase change material for heating and domestic hot water systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 557-568.
    4. Lukas Hegner & Stefan Krimmel & Rebecca Ravotti & Dominic Festini & Jörg Worlitschek & Anastasia Stamatiou, 2021. "Experimental Feasibility Study of a Direct Contact Latent Heat Storage Using an Ester as a Bio-Based Storage Material," Energies, MDPI, vol. 14(2), pages 1-26, January.
    5. Ko, Jinyoung & Cheon, Seong-Yong & Kang, Yong-Kwon & Jeong, Jae-Weon, 2022. "Design of a thermoelectric generator-assisted energy harvesting block considering melting temperature of phase change materials," Renewable Energy, Elsevier, vol. 193(C), pages 89-112.
    6. Nassima Radouane, 2022. "A Comprehensive Review of Composite Phase Change Materials (cPCMs) for Thermal Management Applications, Including Manufacturing Processes, Performance, and Applications," Energies, MDPI, vol. 15(21), pages 1-28, November.
    7. Nallapaneni Manoj Kumar & Aneesh A. Chand & Maria Malvoni & Kushal A. Prasad & Kabir A. Mamun & F.R. Islam & Shauhrat S. Chopra, 2020. "Distributed Energy Resources and the Application of AI, IoT, and Blockchain in Smart Grids," Energies, MDPI, vol. 13(21), pages 1-42, November.
    8. Cheayb, Mohamad & Marin Gallego, Mylène & Tazerout, Mohand & Poncet, Sébastien, 2022. "A techno-economic analysis of small-scale trigenerative compressed air energy storage system," Energy, Elsevier, vol. 239(PA).
    9. Dutil, Yvan & Rousse, Daniel R. & Salah, Nizar Ben & Lassue, Stéphane & Zalewski, Laurent, 2011. "A review on phase-change materials: Mathematical modeling and simulations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 112-130, January.
    10. Gholamibozanjani, Gohar & Farid, Mohammed, 2020. "A comparison between passive and active PCM systems applied to buildings," Renewable Energy, Elsevier, vol. 162(C), pages 112-123.
    11. Guo, Junfei & Liu, Zhan & Du, Zhao & Yu, Jiabang & Yang, Xiaohu & Yan, Jinyue, 2021. "Effect of fin-metal foam structure on thermal energy storage: An experimental study," Renewable Energy, Elsevier, vol. 172(C), pages 57-70.
    12. Naveed Hassan & Manickam Minakshi & Willey Yun Hsien Liew & Amun Amri & Zhong-Tao Jiang, 2023. "Thermal Characterization of Binary Calcium-Lithium Chloride Salts for Thermal Energy Storage at High Temperature," Energies, MDPI, vol. 16(12), pages 1-16, June.
    13. Hu, Nan & Li, Zi-Rui & Xu, Zhe-Wen & Fan, Li-Wu, 2022. "Rapid charging for latent heat thermal energy storage: A state-of-the-art review of close-contact melting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    14. Jiang, Fuyun & Wang, Xiaodong & Wu, Dezhen, 2016. "Magnetic microencapsulated phase change materials with an organo-silica shell: Design, synthesis and application for electromagnetic shielding and thermal regulating polyimide films," Energy, Elsevier, vol. 98(C), pages 225-239.
    15. José A. Tenorio & José Sánchez-Ramos & Álvaro Ruiz-Pardo & Servando Álvarez & Luisa F. Cabeza, 2015. "Energy Efficiency Indicators for Assessing Construction Systems Storing Renewable Energy: Application to Phase Change Material-Bearing Façades," Energies, MDPI, vol. 8(8), pages 1-20, August.
    16. Bąk, Agnieszka & Pławecka, Kinga & Bazan, Patrycja & Łach, Michał, 2023. "Influence of the addition of phase change materials on thermal insulation properties of foamed geopolymer structures based on fly ash," Energy, Elsevier, vol. 278(C).
    17. Shibahara, Makoto & Liu, Qiusheng & Fukuda, Katsuya, 2016. "Transient natural convection heat transfer of liquid D-mannitol on a horizontal cylinder," Renewable Energy, Elsevier, vol. 99(C), pages 971-977.
    18. Bal, Lalit M. & Satya, Santosh & Naik, S.N., 2010. "Solar dryer with thermal energy storage systems for drying agricultural food products: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(8), pages 2298-2314, October.
    19. Hong, Sanghyun & Kim, Eunsung & Jeong, Saerok, 2023. "Evaluating the sustainability of the hydrogen economy using multi-criteria decision-making analysis in Korea," Renewable Energy, Elsevier, vol. 204(C), pages 485-492.
    20. Anis Ur Rehman & Mazhar Abbas & Faraz Ahmad Abbasi & Shoaib Khan, 2023. "How Tourist Experience Quality, Perceived Price Reasonableness and Regenerative Tourism Involvement Influence Tourist Satisfaction: A Study of Ha’il Region, Saudi Arabia," Sustainability, MDPI, vol. 15(2), pages 1-27, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:311:y:2022:i:c:s0306261922001441. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.