IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v193y2022icp89-112.html
   My bibliography  Save this article

Design of a thermoelectric generator-assisted energy harvesting block considering melting temperature of phase change materials

Author

Listed:
  • Ko, Jinyoung
  • Cheon, Seong-Yong
  • Kang, Yong-Kwon
  • Jeong, Jae-Weon

Abstract

Smart sensors in buildings require independent power supplies to measure the built environment data. To supply electricity to these smart sensors, an enhanced concept of a thermoelectric generator-assisted energy harvesting block was established in this study. An energy block comprising thermoelectric generators and phase change materials can convert the heat flux through building exteriors into electricity during the day and at night. The objective of this study was to derive appropriate phase change material design conditions to maximize the power generation performance of the energy harvesting block. Three energy harvesting blocks—case 1, case 2, and case 3—were constructed with phase change materials having melting temperatures of 26 °C, 38 °C, and 47 °C, respectively. Experiments were conducted to emulate solar radiation with the average so-air temperature profiles of 12 months, while the temperatures and open-circuit voltages were measured. Of the three cases, case 1 exhibited the largest generated energy under 12 sol-air temperature profiles. In addition, case 1 showed a 46.5% and 66.5% larger approximated annual generated energy than case 2 and case 3, respectively. The phase change material with a melting temperature of 26 °C in the energy harvesting block was appropriate for maximizing power generation under the temperature conditions of Seoul, South Korea.

Suggested Citation

  • Ko, Jinyoung & Cheon, Seong-Yong & Kang, Yong-Kwon & Jeong, Jae-Weon, 2022. "Design of a thermoelectric generator-assisted energy harvesting block considering melting temperature of phase change materials," Renewable Energy, Elsevier, vol. 193(C), pages 89-112.
    • Handle: RePEc:eee:renene:v:193:y:2022:i:c:p:89-112
    DOI: 10.1016/j.renene.2022.05.023
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122006632
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2022.05.023?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, Yong Jun & Gu, Hyun Mo & Kim, Choong Sun & Choi, Hyeongdo & Lee, Gyusoup & Kim, Seongho & Yi, Kevin K. & Lee, Sang Gug & Cho, Byung Jin, 2018. "High-performance self-powered wireless sensor node driven by a flexible thermoelectric generator," Energy, Elsevier, vol. 162(C), pages 526-533.
    2. O'Callaghan, P. W. & Probert, S. D., 1977. "Sol-air temperature," Applied Energy, Elsevier, vol. 3(4), pages 307-311, October.
    3. Ko, Jinyoung & Jeong, Jae-Weon, 2021. "Annual performance evaluation of thermoelectric generator-assisted building-integrated photovoltaic system with phase change material," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    4. Lin, Qiliang & Chen, Yi-Chung & Chen, Fangliang & DeGanyar, Tejav & Yin, Huiming, 2022. "Design and experiments of a thermoelectric-powered wireless sensor network platform for smart building envelope," Applied Energy, Elsevier, vol. 305(C).
    5. Wu, Chang-Bo & Wu, Gang & Yang, Xi & Liu, Yu-Jing & Liang, Tao & Fu, Wei-Fei & Wang, Mang & Chen, Hong-Zheng, 2015. "Preparation of microencapsulated medium temperature phase change material of Tris(hydroxymethyl)methyl aminomethane@SiO2 with excellent cycling performance," Applied Energy, Elsevier, vol. 154(C), pages 361-368.
    6. Byon, Yoo-Suk & Jeong, Jae-Weon, 2020. "Phase change material-integrated thermoelectric energy harvesting block as an independent power source for sensors in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Joung, Jaewon & Cheon, Seong-Yong & Kang, Yong-Kwon & Kim, Minseong & Park, Junseok & Jeong, Jae-Weon, 2023. "Impact of external electric resistance on the power generation in the thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 212(C), pages 779-791.
    2. Wang, Ji-Xiang & Qian, Jian & Wang, Ni & Zhang, He & Cao, Xiang & Liu, Feifan & Hao, Guanqiu, 2023. "A scalable micro-encapsulated phase change material and liquid metal integrated composite for sustainable data center cooling," Renewable Energy, Elsevier, vol. 213(C), pages 75-85.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Joung, Jaewon & Cheon, Seong-Yong & Kang, Yong-Kwon & Kim, Minseong & Park, Junseok & Jeong, Jae-Weon, 2023. "Impact of external electric resistance on the power generation in the thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 212(C), pages 779-791.
    2. Hong, Bing-Hua & Huang, Xiao-Yan & He, Jian-Wei & Cai, Yang & Wang, Wei-Wei & Zhao, Fu-Yun, 2023. "Round-the-clock performance of solar thermoelectric wall with phase change material in subtropical climate: Critical analysis and parametric investigations," Energy, Elsevier, vol. 272(C).
    3. Kang, Yong-Kwon & Joung, Jaewon & Kim, Minseong & Jeong, Jae-Weon, 2023. "Energy impact of heat pipe-assisted microencapsulated phase change material heat sink for photovoltaic and thermoelectric generator hybrid panel," Renewable Energy, Elsevier, vol. 207(C), pages 298-308.
    4. Yong-Kwon Kang & Jaewon Joung & Minseong Kim & Hyun-Hwa Lee & Jae-Weon Jeong, 2022. "Numerical Analysis of a TEG and mPCM Enhancement System for BIPVs Using CFD," Sustainability, MDPI, vol. 14(23), pages 1-17, November.
    5. Alva, Guruprasad & Huang, Xiang & Liu, Lingkun & Fang, Guiyin, 2017. "Synthesis and characterization of microencapsulated myristic acid–palmitic acid eutectic mixture as phase change material for thermal energy storage," Applied Energy, Elsevier, vol. 203(C), pages 677-685.
    6. Thi Kim Tuoi, Truong & Van Toan, Nguyen & Ono, Takahito, 2022. "Self-powered wireless sensing system driven by daily ambient temperature energy harvesting," Applied Energy, Elsevier, vol. 311(C).
    7. Rui Quan & Tao Li & Yousheng Yue & Yufang Chang & Baohua Tan, 2020. "Experimental Study on a Thermoelectric Generator for Industrial Waste Heat Recovery Based on a Hexagonal Heat Exchanger," Energies, MDPI, vol. 13(12), pages 1-14, June.
    8. Meng, Jing-Hui & Gao, De-Yang & Liu, Yan & Zhang, Kai & Lu, Gui, 2022. "Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance," Energy, Elsevier, vol. 245(C).
    9. Gao, Yuanzhi & Dai, Zhaofeng & Wu, Dongxu & Wang, Changling & Chen, Bo & Zhang, Xiaosong, 2022. "Transient performance assessment of a hybrid PV-TEG system integrated with PCM under non-uniform radiation conditions: A numerical investigation," Renewable Energy, Elsevier, vol. 198(C), pages 352-366.
    10. Irene Cappelli & Stefano Parrino & Alessandro Pozzebon & Alessio Salta, 2021. "Providing Energy Self-Sufficiency to LoRaWAN Nodes by Means of Thermoelectric Generators (TEGs)-Based Energy Harvesting," Energies, MDPI, vol. 14(21), pages 1-17, November.
    11. Lin, Xuemin & Ling, Ziye & Fang, Xiaoming & Zhang, Zhengguo, 2022. "Flexibility and shape memory of phase change material capable of rapid electric heating function for wearable thermotherapy," Applied Energy, Elsevier, vol. 327(C).
    12. Wang, Tingyu & Wang, Shuangfeng & Luo, Ruilian & Zhu, Chunyu & Akiyama, Tomohiro & Zhang, Zhengguo, 2016. "Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage," Applied Energy, Elsevier, vol. 171(C), pages 113-119.
    13. He, Yayue & Li, Wei & Han, Na & Wang, Jianping & Zhang, Xingxiang, 2019. "Facile flexible reversible thermochromic membranes based on micro/nanoencapsulated phase change materials for wearable temperature sensor," Applied Energy, Elsevier, vol. 247(C), pages 615-629.
    14. Vassiliades, C. & Agathokleous, R. & Barone, G. & Forzano, C. & Giuzio, G.F. & Palombo, A. & Buonomano, A. & Kalogirou, S., 2022. "Building integration of active solar energy systems: A review of geometrical and architectural characteristics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 164(C).
    15. Lineykin, Simon & Maslah, Kareem & Kuperman, Alon, 2020. "Manufacturer-data-only-based modeling and optimized design of thermoelectric harvesters operating at low temperature gradients," Energy, Elsevier, vol. 213(C).
    16. Borhani, S.M. & Hosseini, M.J. & Pakrouh, R. & Ranjbar, A.A. & Nourian, A., 2021. "Performance enhancement of a thermoelectric harvester with a PCM/Metal foam composite," Renewable Energy, Elsevier, vol. 168(C), pages 1122-1140.
    17. Nassima Radouane, 2022. "A Comprehensive Review of Composite Phase Change Materials (cPCMs) for Thermal Management Applications, Including Manufacturing Processes, Performance, and Applications," Energies, MDPI, vol. 15(21), pages 1-28, November.
    18. Wirtz, Marco, 2023. "nPro: A web-based planning tool for designing district energy systems and thermal networks," Energy, Elsevier, vol. 268(C).
    19. Ashraf Virk, Mati-ur-Rasool & Mysorewala, Muhammad Faizan & Cheded, Lahouari & Aliyu, AbdulRahman, 2022. "Review of energy harvesting techniques in wireless sensor-based pipeline monitoring networks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    20. Lv, Zhihan & Cheng, Chen & Lv, Haibin, 2023. "Digital twins for secure thermal energy storage in building," Applied Energy, Elsevier, vol. 338(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:193:y:2022:i:c:p:89-112. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.