IDEAS home Printed from https://ideas.repec.org/a/wly/navres/v46y1999i6p737-751.html
   My bibliography  Save this article

Product commonality in multiple‐period, make‐to‐stock systems

Author

Listed:
  • Mark S. Hillier

Abstract

It is well known that replacing several products by a single common product can reduce required safety stock levels due to the benefits of risk pooling. Recent research utilizing single‐period models has investigated the cost savings (or losses) from doing so. This paper uses a very general multiple‐period model, with general demand distributions, any number of products, and the objective of minimizing production, holding, and shortage costs. Two scenarios are considered—one that utilizes a common product and one that does not. Prior results utilizing single‐period models indicate that even if the common product is more expensive than the products it replaces, there are many circumstances under which it is still worthwhile to employ. Surprisingly, this paper will show that this is almost never the case in a multiple‐period model. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 737–751, 1999

Suggested Citation

  • Mark S. Hillier, 1999. "Product commonality in multiple‐period, make‐to‐stock systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 46(6), pages 737-751, September.
    • Handle: RePEc:wly:navres:v:46:y:1999:i:6:p:737-751
    DOI: 10.1002/(SICI)1520-6750(199909)46:63.0.CO;2-M
    as

    Download full text from publisher

    File URL: https://doi.org/10.1002/(SICI)1520-6750(199909)46:63.0.CO;2-M
    Download Restriction: no
    File URL: https://libkey.io/10.1002/(SICI)1520-6750(199909)46:63.0.CO;2-M?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Yigal Gerchak & Mordechai Henig, 1989. "Component commonality in assemble‐to‐order systems: Models and properties," Naval Research Logistics (NRL), John Wiley & Sons, vol. 36(1), pages 61-68, February.
    2. David A. Collier, 1982. "Aggregate Safety Stock Levels and Component Part Commonality," Management Science, INFORMS, vol. 28(11), pages 1296-1303, November.
    3. John O. McClain & William L. Maxwell & John A. Muckstadt & L. Joseph Thomas & Elliott N. Weiss, 1984. "Note---Comment on "Aggregate Safety Stock Levels and Component Part Commonality"," Management Science, INFORMS, vol. 30(6), pages 772-773, June.
    4. David A. Collier, 1984. "Reply---On "Comment on Aggregate Safety Stock Levels and Component Part Commonality"," Management Science, INFORMS, vol. 30(6), pages 773-774, June.
    5. Kenneth R. Baker & Michael J. Magazine & Henry L. W. Nuttle, 1986. "The Effect of Commonality on Safety Stock in a Simple Inventory Model," Management Science, INFORMS, vol. 32(8), pages 982-988, August.
    6. Yigal Gerchak & Michael J. Magazine & A. Bruce Gamble, 1988. "Component Commonality with Service Level Requirements," Management Science, INFORMS, vol. 34(6), pages 753-760, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Droge, Cornelia & Vickery, Shawnee K. & Jacobs, Mark A., 2012. "Does supply chain integration mediate the relationships between product/process strategy and service performance? An empirical study," International Journal of Production Economics, Elsevier, vol. 137(2), pages 250-262.
    2. Narendra Agrawal & Morris A. Cohen, 2001. "Optimal material control in an assembly system with component commonality," Naval Research Logistics (NRL), John Wiley & Sons, vol. 48(5), pages 409-429, August.
    3. Ulrich W. Thonemann & Margaret L. Brandeau, 2000. "Optimal Commonality in Component Design," Operations Research, INFORMS, vol. 48(1), pages 1-19, February.
    4. Jan A. Van Mieghem, 2004. "Note--Commonality Strategies: Value Drivers and Equivalence with Flexible Capacity and Inventory Substitution," Management Science, INFORMS, vol. 50(3), pages 419-424, March.
    5. Amit Eynan & Meir J. Rosenblatt, 2007. "The impact of component commonality on composite assembly policies," Naval Research Logistics (NRL), John Wiley & Sons, vol. 54(6), pages 615-622, September.
    6. Hsieh, Ying-Jiun, 2011. "Demand switching criteria for multiple products: An inventory cost analysis," Omega, Elsevier, vol. 39(2), pages 130-137, April.
    7. Hillier, Mark S., 2002. "Using commonality as backup safety stock," European Journal of Operational Research, Elsevier, vol. 136(2), pages 353-365, January.
    8. Jeet, Vishv & Kutanoglu, Erhan, 2018. "Part commonality effects on integrated network design and inventory models for low-demand service parts logistics systems," International Journal of Production Economics, Elsevier, vol. 206(C), pages 46-58.
    9. Fernando Bernstein & Gregory A. DeCroix & Yulan Wang, 2007. "Incentives and Commonality in a Decentralized Multiproduct Assembly System," Operations Research, INFORMS, vol. 55(4), pages 630-646, August.
    10. Albert Y. Ha, 2000. "Stock Rationing in an M/E k /1 Make-to-Stock Queue," Management Science, INFORMS, vol. 46(1), pages 77-87, January.
    11. Ma, Shihua & Wang, Wei & Liu, Liming, 2002. "Commonality and postponement in multistage assembly systems," European Journal of Operational Research, Elsevier, vol. 142(3), pages 523-538, November.
    12. Eva Labro, 2004. "The Cost Effects of Component Commonality: A Literature Review Through a Management-Accounting Lens," Manufacturing & Service Operations Management, INFORMS, vol. 6(4), pages 358-367, June.
    13. Alex X. Zhang, 1997. "Demand Fulfillment Rates In An Assembleto‐ Order System With Multiple Products And Dependent Demands," Production and Operations Management, Production and Operations Management Society, vol. 6(3), pages 309-324, September.
    14. Mohebbi, E. & Choobineh, F., 2005. "The impact of component commonality in an assemble-to-order environment under supply and demand uncertainty," Omega, Elsevier, vol. 33(6), pages 472-482, December.
    15. Betts, John M. & Johnston, Robert B., 2005. "Just-in-time component replenishment decisions for assemble-to-order manufacturing under capital constraint and stochastic demand," International Journal of Production Economics, Elsevier, vol. 95(1), pages 51-70, January.
    16. Jans, Raf & Degraeve, Zeger & Schepens, Luc, 2008. "Analysis of an industrial component commonality problem," European Journal of Operational Research, Elsevier, vol. 186(2), pages 801-811, April.
    17. Anand Paul & Asoo J. Vakharia, 2006. "Requirements planning for modular products," Naval Research Logistics (NRL), John Wiley & Sons, vol. 53(5), pages 418-431, August.
    18. Zhou, Li & Grubbstrom, R.W.Robert W., 2004. "Analysis of the effect of commonality in multi-level inventory systems applying MRP theory," International Journal of Production Economics, Elsevier, vol. 90(2), pages 251-263, July.
    19. Fernando Bernstein & Gregory A. DeCroix, 2015. "Advance Demand Information in a Multiproduct System," Manufacturing & Service Operations Management, INFORMS, vol. 17(1), pages 52-65, February.
    20. Hausman, Warren H. & Lee, Hau L. & Zhang, Alex X., 1998. "Joint demand fulfillment probability in a multi-item inventory system with independent order-up-to policies," European Journal of Operational Research, Elsevier, vol. 109(3), pages 646-659, September.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:navres:v:46:y:1999:i:6:p:737-751. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)1520-6750 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.