IDEAS home Printed from https://ideas.repec.org/a/taf/tprsxx/v55y2017i23p7223-7235.html
   My bibliography  Save this article

Assessment approach to stage of lean transformation cycle based on fuzzy nearness degree and TOPSIS

Author

Listed:
  • Chao-chao Liu
  • Zhan-wen Niu
  • Pei-Chann Chang
  • Bo Zhang

Abstract

This paper presents an assessment method to measure the lean transformation (LT) stage of an LT enterprise. Although there are many assessment tools to measure the various aspects of lean practices in enterprises, there is none to measure the stage of LT using the enterprise transformation characteristics from enterprise level. In this paper, the characteristic metrics and characteristic model of LT cycle were extracted from the basic capacity, process power and transformation results. Then, an assessment approach based on fuzzy nearness degree and TOPSIS is proposed to determine the stage of LT. Finally, an example is shown to highlight the procedure of the proposed method. This paper shows that the proposed model is very well suited as an assessment tool for enterprises in the manufacturing industry and other industries to evaluate the LT stage.

Suggested Citation

  • Chao-chao Liu & Zhan-wen Niu & Pei-Chann Chang & Bo Zhang, 2017. "Assessment approach to stage of lean transformation cycle based on fuzzy nearness degree and TOPSIS," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 7223-7235, December.
    • Handle: RePEc:taf:tprsxx:v:55:y:2017:i:23:p:7223-7235
    DOI: 10.1080/00207543.2017.1355124
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1080/00207543.2017.1355124
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/00207543.2017.1355124?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. R.M. Thirupathi & S. Vinodh, 2016. "Application of interpretive structural modelling and structural equation modelling for analysis of sustainable manufacturing factors in Indian automotive component sector," International Journal of Production Research, Taylor & Francis Journals, vol. 54(22), pages 6661-6682, November.
    2. Azadegan, Arash & Porobic, Lejla & Ghazinoory, Sepehr & Samouei, Parvaneh & Saman Kheirkhah, Amir, 2011. "Fuzzy logic in manufacturing: A review of literature and a specialized application," International Journal of Production Economics, Elsevier, vol. 132(2), pages 258-270, August.
    3. Chavez, Roberto & Yu, Wantao & Jacobs, Mark & Fynes, Brian & Wiengarten, Frank & Lecuna, Antonio, 2015. "Internal lean practices and performance: The role of technological turbulence," International Journal of Production Economics, Elsevier, vol. 160(C), pages 157-171.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ahmad A. Mumani & Ghazi M. Magableh & Mahmoud Z. Mistarihi, 2022. "Decision making process in lean assessment and implementation: a review," Management Review Quarterly, Springer, vol. 72(4), pages 1089-1128, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Catherine Maware & David M. Parsley, 2022. "The Challenges of Lean Transformation and Implementation in the Manufacturing Sector," Sustainability, MDPI, vol. 14(10), pages 1-24, May.
    2. da Silva, Agostinho & Almeida, Isabel, 2020. "Towards INDUSTRY 4.0 | a case STUDY in ornamental stone sector," Resources Policy, Elsevier, vol. 67(C).
    3. David Opresnik & Maurizio Fiasché & Marco Taisch & Manuel Hirsch, 0. "An evolving fuzzy inference system for extraction of rule set for planning a product–service strategy," Information Technology and Management, Springer, vol. 0, pages 1-17.
    4. Scaringella, Laurent & Burtschell, François, 2017. "The challenges of radical innovation in Iran: Knowledge transfer and absorptive capacity highlights — Evidence from a joint venture in the construction sector," Technological Forecasting and Social Change, Elsevier, vol. 122(C), pages 151-169.
    5. Sylvia Novillo-Villegas & Ricardo Ayala-Andrade & Juan Pablo Lopez-Cox & Javier Salazar-Oyaneder & Patricia Acosta-Vargas, 2022. "A Roadmap for Innovation Capacity in Developing Countries," Sustainability, MDPI, vol. 14(11), pages 1-20, May.
    6. Mukisa, Nicholas & Zamora, Ramon & Lie, Tek Tjing, 2020. "Assessment of community sustainable livelihoods capitals for the implementation of alternative energy technologies in Uganda – Africa," Renewable Energy, Elsevier, vol. 160(C), pages 886-902.
    7. Haji Vahabzadeh, Ali & Asiaei, Arash & Zailani, Suhaiza, 2015. "Reprint of “Green decision-making model in reverse logistics using FUZZY-VIKOR method”," Resources, Conservation & Recycling, Elsevier, vol. 104(PB), pages 334-347.
    8. Osterrieder, Philipp & Budde, Lukas & Friedli, Thomas, 2020. "The smart factory as a key construct of industry 4.0: A systematic literature review," International Journal of Production Economics, Elsevier, vol. 221(C).
    9. Bendig, David & Brettel, Malte & Downar, Benedikt, 2018. "Inventory component volatility and its relation to returns," International Journal of Production Economics, Elsevier, vol. 200(C), pages 37-49.
    10. Kenneth Ugochukwu NNADI & Augustine Egwu NDU OKO, 2021. "The impact of Lean Inventory Management Practices on Firm Performance: A Study of Selected Oil and Gas Companies in Rivers State, Nigeria," International Journal of Research and Scientific Innovation, International Journal of Research and Scientific Innovation (IJRSI), vol. 8(3), pages 123-135, March.
    11. Chand, Pushpendu & Thakkar, Jitesh J. & Ghosh, Kunal Kanti, 2020. "Analysis of supply chain sustainability with supply chain complexity, inter-relationship study using delphi and interpretive structural modeling for Indian mining and earthmoving machinery industry," Resources Policy, Elsevier, vol. 68(C).
    12. Abbas Mardani & Dalia Streimikiene & Edmundas Kazimieras Zavadskas & Fausto Cavallaro & Mehrbakhsh Nilashi & Ahmad Jusoh & Habib Zare, 2017. "Application of Structural Equation Modeling (SEM) to Solve Environmental Sustainability Problems: A Comprehensive Review and Meta-Analysis," Sustainability, MDPI, vol. 9(10), pages 1-65, October.
    13. Bortolotti, Thomas & Romano, Pietro & Martínez-Jurado, Pedro José & Moyano-Fuentes, José, 2016. "Towards a theory for lean implementation in supply networks," International Journal of Production Economics, Elsevier, vol. 175(C), pages 182-196.
    14. Fabiane Letícia Lizarelli & Jiju Antony & José Carlos Toledo, 2020. "Statistical thinking and its impact on operational performance in manufacturing companies: an empirical study," Annals of Operations Research, Springer, vol. 295(2), pages 923-950, December.
    15. Jain, Vineet & Raj, Tilak, 2016. "Modeling and analysis of FMS performance variables by ISM, SEM and GTMA approach," International Journal of Production Economics, Elsevier, vol. 171(P1), pages 84-96.
    16. Godinho Filho, Moacir & Marchesini, Antonio Gilberto & Riezebos, Jan & Vandaele, Nico & Ganga, Gilberto Miller Devós, 2017. "The application of Quick Response Manufacturing practices in Brazil, Europe, and the USA: An exploratory study," International Journal of Production Economics, Elsevier, vol. 193(C), pages 437-448.
    17. Wanzhu Wang & Qazi Salman Khalid & Muhammad Abas & Hao Li & Shakir Azim & Abdur Rehman Babar & Waqas Saleem & Razaullah Khan, 2021. "Implementation of POLCA Integrated QRM Framework for Optimized Production Performance—A Case Study," Sustainability, MDPI, vol. 13(6), pages 1-22, March.
    18. Abreu-Ledón, René & Luján-García, Darkys E. & Garrido-Vega, Pedro & Escobar-Pérez, Bernabé, 2018. "A meta-analytic study of the impact of Lean Production on business performance," International Journal of Production Economics, Elsevier, vol. 200(C), pages 83-102.
    19. Masoumi, A.P. & Tavakolpour-Saleh, A.R. & Rahideh, A., 2020. "Applying a genetic-fuzzy control scheme to an active free piston Stirling engine: Design and experiment," Applied Energy, Elsevier, vol. 268(C).
    20. Haji Vahabzadeh, Ali & Asiaei, Arash & Zailani, Suhaiza, 2015. "Green decision-making model in reverse logistics using FUZZY-VIKOR method," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 125-138.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:tprsxx:v:55:y:2017:i:23:p:7223-7235. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/TPRS20 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.