IDEAS home Printed from https://ideas.repec.org/a/spr/opmare/v14y2021i3d10.1007_s12063-021-00228-6.html
   My bibliography  Save this article

Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach

Author

Listed:
  • Nazanin Hosseini Arian

    (Ferdowsi University of Mashhad)

  • Alireza Pooya

    (Ferdowsi University of Mashhad)

  • Fariborz Rahimnia

    (Ferdowsi University of Mashhad)

  • Ali Sibevei

    (Tarbiat Modares University)

Abstract

The present study aimed to assess the effect of implementing Rapid Prototyping (RP) in the product development phase on the sustainability of a conventional supply chain. The sustainability indicators of RP utilization were identified through a critical literature review and consulting two experienced RP practitioners to determine the key variables regarding the potential impact of RP on the supply chain components, with an emphasis on sustainability pillars. A generic system dynamics modeling was provided to simulate the RP-adapted supply chain and measure its sustainability performance. The simulation results indicated that RP utilization in the design phase could decrease the number of the assembly parts and material consumption in conventional manufacturing, while indirectly affecting the reduction of waste generation, logistics, CO2 emissions, processes, and the total costs which are related to environmental and economic aspects of the sustainable supply chain. Findings indicated that significant increase in operational skills and knowledge as the main indicators of the social dimension could remarkably reduce the failure rates and increase the quality of the products. This indicator plays a pivotal role in operational success and could be enhanced through training programs. Social sustainability indirectly affects environmental and economic sustainability. This was the first model-based research to examine the potential effects of RP on the sustainability of a conventional manufacturing. The proposed generic model encompassed the variables that could be applicable in every scenario to help decision-makers change values or add more variables within specific industry settings and choose the applicable ones, which in turn, accelerating the RP adoption in supply chains and providing insights for operational decisions regarding product design stage.

Suggested Citation

  • Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
  • Handle: RePEc:spr:opmare:v:14:y:2021:i:3:d:10.1007_s12063-021-00228-6
    DOI: 10.1007/s12063-021-00228-6
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12063-021-00228-6
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.

    File URL: https://libkey.io/10.1007/s12063-021-00228-6?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Barlas, Yaman, 1989. "Multiple tests for validation of system dynamics type of simulation models," European Journal of Operational Research, Elsevier, vol. 42(1), pages 59-87, September.
    2. Lucia Corsini & James Moultrie, 2019. "Design for Social Sustainability: Using Digital Fabrication in the Humanitarian and Development Sector," Sustainability, MDPI, vol. 11(13), pages 1-20, June.
    3. Katrin Oettmeier & Erik Hofmann, 2017. "Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants," Journal of Business Economics, Springer, vol. 87(1), pages 97-124, January.
    4. Dian Prama Irfani & Dermawan Wibisono & Mursyid Hasan Basri, 2019. "Integrating performance measurement, system dynamics, and problem-solving methods," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 69(5), pages 939-961, October.
    5. Morgane M.C. Fritz & Josef-Peter Schöggl & Rupert Baumgartner, 2017. "Selected sustainability aspects for supply chain data exchange: Towards a supply chain-wide sustainability assessment," Post-Print hal-02547247, HAL.
    6. Jiang, Ruth & Kleer, Robin & Piller, Frank T., 2017. "Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030," Technological Forecasting and Social Change, Elsevier, vol. 117(C), pages 84-97.
    7. Alireza Tajbakhsh & Elkafi Hassini, 2015. "Performance measurement of sustainable supply chains: a review and research questions," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 64(6), pages 744-783, July.
    8. Yang, Yiran & Li, Lin, 2018. "Cost modeling and analysis for Mask Image Projection Stereolithography additive manufacturing: Simultaneous production with mixed geometries," International Journal of Production Economics, Elsevier, vol. 206(C), pages 146-158.
    9. Yao Li & Guozhu Jia & Yang Cheng & Yuchen Hu, 2017. "Additive manufacturing technology in spare parts supply chain: a comparative study," International Journal of Production Research, Taylor & Francis Journals, vol. 55(5), pages 1498-1515, March.
    10. Karel Kellens & Martin Baumers & Timothy G. Gutowski & William Flanagan & Reid Lifset & Joost R. Duflou, 2017. "Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications," Journal of Industrial Ecology, Yale University, vol. 21(S1), pages 49-68, November.
    11. Pierre-Antoine Arrighi & Céline Mougenot, 2019. "Towards user empowerment in product design: a mixed reality tool for interactive virtual prototyping," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 743-754, February.
    12. Ivo Šlaus & Garry Jacobs, 2011. "Human Capital and Sustainability," Sustainability, MDPI, vol. 3(1), pages 1-58, January.
    13. Omid Narimissa & Ali Kangarani‐Farahani & Saber Molla‐Alizadeh‐Zavardehi, 2020. "Evaluation of sustainable supply chain management performance: Indicators," Sustainable Development, John Wiley & Sons, Ltd., vol. 28(1), pages 118-131, January.
    14. Sheng Yang & Thomas Page & Ying Zhang & Yaoyao Fiona Zhao, 2020. "Towards an automated decision support system for the identification of additive manufacturing part candidates," Journal of Intelligent Manufacturing, Springer, vol. 31(8), pages 1917-1933, December.
    15. Despeisse, M. & Baumers, M. & Brown, P. & Charnley, F. & Ford, S.J. & Garmulewicz, A. & Knowles, S. & Minshall, T.H.W. & Mortara, L. & Reed-Tsochas, F.P. & Rowley, J., 2017. "Unlocking value for a circular economy through 3D printing: A research agenda," Technological Forecasting and Social Change, Elsevier, vol. 115(C), pages 75-84.
    16. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    17. Omid Narimissa & Ali Kangarani‐Farahani & Saber Molla‐Alizadeh‐Zavardehi, 2020. "Evaluation of sustainable supply chain management performance: Dimensions and aspects," Sustainable Development, John Wiley & Sons, Ltd., vol. 28(1), pages 1-12, January.
    18. Hassini, Elkafi & Surti, Chirag & Searcy, Cory, 2012. "A literature review and a case study of sustainable supply chains with a focus on metrics," International Journal of Production Economics, Elsevier, vol. 140(1), pages 69-82.
    19. Thomas-Seale, L.E.J. & Kirkman-Brown, J.C. & Attallah, M.M. & Espino, D.M. & Shepherd, D.E.T., 2018. "The barriers to the progression of additive manufacture: Perspectives from UK industry," International Journal of Production Economics, Elsevier, vol. 198(C), pages 104-118.
    20. Knofius, N. & van der Heijden, M.C. & Zijm, W.H.M., 2019. "Consolidating spare parts for asset maintenance with additive manufacturing," International Journal of Production Economics, Elsevier, vol. 208(C), pages 269-280.
    21. Atanu Sengupta & Sanjoy De, 2020. "Review of Literature," India Studies in Business and Economics, in: Assessing Performance of Banks in India Fifty Years After Nationalization, chapter 0, pages 15-30, Springer.
    22. Xiang Li & Xiaodong Jia & Qibo Yang & Jay Lee, 2020. "Quality analysis in metal additive manufacturing with deep learning," Journal of Intelligent Manufacturing, Springer, vol. 31(8), pages 2003-2017, December.
    23. Inês Ribeiro & Florinda Matos & Celeste Jacinto & Hafiz Salman & Gonçalo Cardeal & Helena Carvalho & Radu Godina & Paulo Peças, 2020. "Framework for Life Cycle Sustainability Assessment of Additive Manufacturing," Sustainability, MDPI, vol. 12(3), pages 1-22, January.
    24. Mani, Venkatesh & Gunasekaran, Angappa & Delgado, Catarina, 2018. "Supply chain social sustainability: Standard adoption practices in Portuguese manufacturing firms," International Journal of Production Economics, Elsevier, vol. 198(C), pages 149-164.
    25. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    26. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    27. Attaran, Mohsen, 2017. "The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing," Business Horizons, Elsevier, vol. 60(5), pages 677-688.
    28. Florinda Matos & Radu Godina & Celeste Jacinto & Helena Carvalho & Inês Ribeiro & Paulo Peças, 2019. "Additive Manufacturing: Exploring the Social Changes and Impacts," Sustainability, MDPI, vol. 11(14), pages 1-18, July.
    29. Pierre-Antoine Arrighi & Céline Mougenot, 2019. "Erratum to: Towards user empowerment in product design: a mixed reality tool for interactive virtual prototyping," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 755-755, February.
    30. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Athar Ajaz Khan & János Abonyi, 2022. "Simulation of Sustainable Manufacturing Solutions: Tools for Enabling Circular Economy," Sustainability, MDPI, vol. 14(15), pages 1-40, August.
    2. Pardis Roozkhosh & Alireza Pooya & Renu Agarwal, 2023. "Blockchain acceptance rate prediction in the resilient supply chain with hybrid system dynamics and machine learning approach," Operations Management Research, Springer, vol. 16(2), pages 705-725, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    3. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    4. Inês Ribeiro & Florinda Matos & Celeste Jacinto & Hafiz Salman & Gonçalo Cardeal & Helena Carvalho & Radu Godina & Paulo Peças, 2020. "Framework for Life Cycle Sustainability Assessment of Additive Manufacturing," Sustainability, MDPI, vol. 12(3), pages 1-22, January.
    5. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    6. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    7. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    8. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    9. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    10. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    11. Matthias M. Meyer & Andreas H. Glas & Michael Eßig, 2021. "Systematic review of sourcing and 3D printing: make-or-buy decisions in industrial buyer–supplier relationships," Management Review Quarterly, Springer, vol. 71(4), pages 723-752, October.
    12. Yeh, Ching-Chiang & Chen, Yi-Fan, 2018. "Critical success factors for adoption of 3D printing," Technological Forecasting and Social Change, Elsevier, vol. 132(C), pages 209-216.
    13. Victor Verboeket & Harold Krikke, 2019. "Additive Manufacturing: A Game Changer in Supply Chain Design," Logistics, MDPI, vol. 3(2), pages 1-27, April.
    14. Ding, Jin & Baumers, Martin & Clark, Elizabeth A. & Wildman, Ricky D., 2021. "The economics of additive manufacturing: Towards a general cost model including process failure," International Journal of Production Economics, Elsevier, vol. 237(C).
    15. Radu Godina & Inês Ribeiro & Florinda Matos & Bruna T. Ferreira & Helena Carvalho & Paulo Peças, 2020. "Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context," Sustainability, MDPI, vol. 12(17), pages 1-21, August.
    16. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    17. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    18. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    19. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    20. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:opmare:v:14:y:2021:i:3:d:10.1007_s12063-021-00228-6. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.