IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v8y2016i9p894-d77373.html
   My bibliography  Save this article

Impact of Battery’s Model Accuracy on Size Optimization Process of a Standalone Photovoltaic System

Author

Listed:
  • Ibrahim Anwar Ibrahim

    (Department of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia)

  • Tamer Khatib

    (Energy Engineering and Environment Department, An-Najah National University, Nablus 97300, Palestine)

  • Azah Mohamed

    (Department of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia)

Abstract

This paper presents a comparative study between two proposed size optimization methods based on two battery’s models. Simple and complex battery models are utilized to optimally size a standalone photovoltaic system. Hourly meteorological data are used in this research for a specific site. Results show that by using the complex model of the battery, the cost of the system is reduced by 31%. In addition, by using the complex battery model, the sizes of the PV array and the battery are reduced by 5.6% and 30%, respectively, as compared to the case which is based on the simple battery model. This shows the importance of utilizing accurate battery models in sizing standalone photovoltaic systems.

Suggested Citation

  • Ibrahim Anwar Ibrahim & Tamer Khatib & Azah Mohamed, 2016. "Impact of Battery’s Model Accuracy on Size Optimization Process of a Standalone Photovoltaic System," Sustainability, MDPI, vol. 8(9), pages 1-13, September.
    • Handle: RePEc:gam:jsusta:v:8:y:2016:i:9:p:894-:d:77373
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/8/9/894/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/8/9/894/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Shen, W.X., 2009. "Optimally sizing of solar array and battery in a standalone photovoltaic system in Malaysia," Renewable Energy, Elsevier, vol. 34(1), pages 348-352.
    2. Abbes, Dhaker & Martinez, André & Champenois, Gérard, 2014. "Life cycle cost, embodied energy and loss of power supply probability for the optimal design of hybrid power systems," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 98(C), pages 46-62.
    3. Nordin, Nur Dalilah & Abdul Rahman, Hasimah, 2016. "A novel optimization method for designing stand alone photovoltaic system," Renewable Energy, Elsevier, vol. 89(C), pages 706-715.
    4. Khatib, Tamer & Mohamed, Azah & Sopian, K., 2013. "A review of photovoltaic systems size optimization techniques," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 454-465.
    5. Bhuiyan, M.M.H. & Ali Asgar, M., 2003. "Sizing of a stand-alone photovoltaic power system at Dhaka," Renewable Energy, Elsevier, vol. 28(6), pages 929-938.
    6. Li, Chun-Hua & Zhu, Xin-Jian & Cao, Guang-Yi & Sui, Sheng & Hu, Ming-Ruo, 2009. "Dynamic modeling and sizing optimization of stand-alone photovoltaic power systems using hybrid energy storage technology," Renewable Energy, Elsevier, vol. 34(3), pages 815-826.
    7. Chen, Shin-Guang, 2012. "An efficient sizing method for a stand-alone PV system in terms of the observed block extremes," Applied Energy, Elsevier, vol. 91(1), pages 375-384.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ridha, Hussein Mohammed & Gomes, Chandima & Hizam, Hashim & Ahmadipour, Masoud & Heidari, Ali Asghar & Chen, Huiling, 2021. "Multi-objective optimization and multi-criteria decision-making methods for optimal design of standalone photovoltaic system: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    2. Ibrahim, Ibrahim Anwar & Khatib, Tamer & Mohamed, Azah, 2017. "Optimal sizing of a standalone photovoltaic system for remote housing electrification using numerical algorithm and improved system models," Energy, Elsevier, vol. 126(C), pages 392-403.
    3. Rona George Allwyn & Rashid Al Abri & Arif Malik & Amer Al-Hinai, 2021. "Economic Analysis of Replacing HPS Lamp with LED Lamp and Cost Estimation to Set Up PV/Battery System for Street Lighting in Oman," Energies, MDPI, vol. 14(22), pages 1-25, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sarhan, Ameen & Hizam, Hashim & Mariun, Norman & Ya'acob, M.E., 2019. "An improved numerical optimization algorithm for sizing and configuration of standalone photo-voltaic system components in Yemen," Renewable Energy, Elsevier, vol. 134(C), pages 1434-1446.
    2. Ibrahim, Ibrahim Anwar & Khatib, Tamer & Mohamed, Azah, 2017. "Optimal sizing of a standalone photovoltaic system for remote housing electrification using numerical algorithm and improved system models," Energy, Elsevier, vol. 126(C), pages 392-403.
    3. Ren, Zhengen & Paevere, Phillip & Chen, Dong, 2019. "Feasibility of off-grid housing under current and future climates," Applied Energy, Elsevier, vol. 241(C), pages 196-211.
    4. Ridha, Hussein Mohammed & Gomes, Chandima & Hizam, Hashim & Ahmadipour, Masoud & Heidari, Ali Asghar & Chen, Huiling, 2021. "Multi-objective optimization and multi-criteria decision-making methods for optimal design of standalone photovoltaic system: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    5. Nordin, Nur Dalilah & Rahman, Hasimah Abdul, 2019. "Comparison of optimum design, sizing, and economic analysis of standalone photovoltaic/battery without and with hydrogen production systems," Renewable Energy, Elsevier, vol. 141(C), pages 107-123.
    6. Bouabdallah, A. & Olivier, J.C. & Bourguet, S. & Machmoum, M. & Schaeffer, E., 2015. "Safe sizing methodology applied to a standalone photovoltaic system," Renewable Energy, Elsevier, vol. 80(C), pages 266-274.
    7. Mandelli, Stefano & Barbieri, Jacopo & Mereu, Riccardo & Colombo, Emanuela, 2016. "Off-grid systems for rural electrification in developing countries: Definitions, classification and a comprehensive literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1621-1646.
    8. Rawat, Rahul & Kaushik, S.C. & Lamba, Ravita, 2016. "A review on modeling, design methodology and size optimization of photovoltaic based water pumping, standalone and grid connected system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1506-1519.
    9. Sinha, Sunanda & Chandel, S.S., 2015. "Review of recent trends in optimization techniques for solar photovoltaic–wind based hybrid energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 755-769.
    10. Mulleriyawage, U.G.K. & Shen, W.X., 2021. "Impact of demand side management on optimal sizing of residential battery energy storage system," Renewable Energy, Elsevier, vol. 172(C), pages 1250-1266.
    11. Khatib, Tamer & Mohamed, Azah & Sopian, K., 2013. "A review of photovoltaic systems size optimization techniques," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 454-465.
    12. Zhou, Jian & Tsianikas, Stamatis & Birnie, Dunbar P. & Coit, David W., 2019. "Economic and resilience benefit analysis of incorporating battery storage to photovoltaic array generation," Renewable Energy, Elsevier, vol. 135(C), pages 652-662.
    13. Mohamed Atef & Tamer Khatib & Muhammad Faris Abdullah & Mohd Fakhizan Romlie, 2020. "Optimization of a Hybrid Solar PV and Gas Turbine Generator System Using the Loss of Load Probability Index," Clean Technol., MDPI, vol. 2(3), pages 1-12, July.
    14. Uzair, Muhammad & Rehman, Naveed ur & Yousuf, Muhammad Uzair, 2022. "Sensitivity analysis of capital and energy production cost for off-grid building integrated photovoltaic systems," Renewable Energy, Elsevier, vol. 186(C), pages 195-206.
    15. Okoye, Chiemeka Onyeka & Oranekwu-Okoye, Blessing Chioma, 2018. "Economic feasibility of solar PV system for rural electrification in Sub-Sahara Africa," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2537-2547.
    16. Chauhan, Anurag & Saini, R.P., 2014. "A review on Integrated Renewable Energy System based power generation for stand-alone applications: Configurations, storage options, sizing methodologies and control," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 99-120.
    17. Khan, Mohammad Junaid & Yadav, Amit Kumar & Mathew, Lini, 2017. "Techno economic feasibility analysis of different combinations of PV-Wind-Diesel-Battery hybrid system for telecommunication applications in different cities of Punjab, India," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 577-607.
    18. Jakhrani, Abdul Qayoom & Othman, Al-Khalid & Rigit, Andrew Ragai Henry & Samo, Saleem Raza & Kamboh, Shakeel Ahmed, 2012. "A novel analytical model for optimal sizing of standalone photovoltaic systems," Energy, Elsevier, vol. 46(1), pages 675-682.
    19. Anoune, Kamal & Bouya, Mohsine & Astito, Abdelali & Abdellah, Abdellatif Ben, 2018. "Sizing methods and optimization techniques for PV-wind based hybrid renewable energy system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 652-673.
    20. Okoye, Chiemeka Onyeka & Solyalı, Oğuz, 2017. "Optimal sizing of stand-alone photovoltaic systems in residential buildings," Energy, Elsevier, vol. 126(C), pages 573-584.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:8:y:2016:i:9:p:894-:d:77373. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.