IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i15p5714-d1207106.html
   My bibliography  Save this article

Estimating In-Situ R-Value of Highly Insulated Building Walls Based on the Measurement of Temperature and Heat Flux Inside the Wall

Author

Listed:
  • Doo-Sung Choi

    (Department of Building Equipment System and Fire Protection Engineering, Chungwoon University, Incheon 22100, Republic of Korea)

  • Ye-Ji Lee

    (Department of Architectural Design and Engineering, Incheon National University, Incheon 22012, Republic of Korea)

  • Ji-Hoon Moon

    (Department of Architectural Design and Engineering, Incheon National University, Incheon 22012, Republic of Korea)

  • Yong-Shik Kim

    (Division of Architecture and Urban Design, Incheon National University, Incheon 22012, Republic of Korea)

  • Myeong-Jin Ko

    (Department of Building System Technology, Daelim University College, Anyang 13916, Republic of Korea)

Abstract

Accurate and rapid in situ measurements of the thermal resistance (R-value) of building envelopes are necessary for assessing planned performance and identifying appropriate retrofitting strategies. Although there are several approaches for in situ R-value estimation, the average method of ISO 9869-1 based on the heat flow meter method is the most widely used. However, discrepancies between theoretical and in situ R-values are frequently reported in many studies that employ this method. This study aimed to investigate the cause of this discrepancy in estimating in situ R-values of highly insulated building walls using the average method of ISO 9869-1 by conducting long-term experiments. This study was made possible due to a specially constructed test wall wherein more sensors were installed than are required by the ISO 9869-1 standard. The findings showed that discrepancies between heat fluxes on the internal surface and heat passing through the wall is the main cause of the error in in situ R-value estimation. Measurement results from winter showed that deviation from the theoretical R-value was 9.12% for the average method and 0.6% for the extended average method, determined by additionally using the temperature and heat flux inside the wall.

Suggested Citation

  • Doo-Sung Choi & Ye-Ji Lee & Ji-Hoon Moon & Yong-Shik Kim & Myeong-Jin Ko, 2023. "Estimating In-Situ R-Value of Highly Insulated Building Walls Based on the Measurement of Temperature and Heat Flux Inside the Wall," Energies, MDPI, vol. 16(15), pages 1-16, July.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:15:p:5714-:d:1207106
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/15/5714/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/15/5714/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Bienvenido-Huertas, David & Moyano, Juan & Marín, David & Fresco-Contreras, Rafael, 2019. "Review of in situ methods for assessing the thermal transmittance of walls," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 356-371.
    2. Doo Sung Choi & Myeong Jin Ko, 2019. "Analysis of Convergence Characteristics of Average Method Regulated by ISO 9869-1 for Evaluating In Situ Thermal Resistance and Thermal Transmittance of Opaque Exterior Walls," Energies, MDPI, vol. 12(10), pages 1-18, May.
    3. Luca Evangelisti & Claudia Guattari & Paola Gori & Roberto De Lieto Vollaro, 2015. "In Situ Thermal Transmittance Measurements for Investigating Differences between Wall Models and Actual Building Performance," Sustainability, MDPI, vol. 7(8), pages 1-11, August.
    4. Doo Sung Choi & Myeong Jin Ko, 2017. "Comparison of Various Analysis Methods Based on Heat Flowmeters and Infrared Thermography Measurements for the Evaluation of the In Situ Thermal Transmittance of Opaque Exterior Walls," Energies, MDPI, vol. 10(7), pages 1-22, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Alejandro Cabeza-Prieto & María Soledad Camino-Olea & María Ascensión Rodríguez-Esteban & Alfredo Llorente-Álvarez & María Paz Sáez Pérez, 2020. "Moisture Influence on the Thermal Operation of the Late 19th Century Brick Facade, in a Historic Building in the City of Zamora," Energies, MDPI, vol. 13(6), pages 1-14, March.
    2. Andrea Alongi & Luca Sala & Adriana Angelotti & Livio Mazzarella, 2023. "In Situ Measurement of Wall Thermal Properties: Parametric Investigation of the Heat Flow Meter Methods through Virtual Experiments Data," Energies, MDPI, vol. 16(10), pages 1-21, May.
    3. Martin, Miguel & Chong, Adrian & Biljecki, Filip & Miller, Clayton, 2022. "Infrared thermography in the built environment: A multi-scale review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    4. Marianna Rotilio & Federica Cucchiella & Pierluigi De Berardinis & Vincenzo Stornelli, 2018. "Thermal Transmittance Measurements of the Historical Masonries: Some Case Studies," Energies, MDPI, vol. 11(11), pages 1-18, November.
    5. Bienvenido-Huertas, David & Moyano, Juan & Marín, David & Fresco-Contreras, Rafael, 2019. "Review of in situ methods for assessing the thermal transmittance of walls," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 356-371.
    6. David Bienvenido-Huertas & Roberto Rodríguez-Álvaro & Juan José Moyano & Fernando Rico & David Marín, 2018. "Determining the U -Value of Façades Using the Thermometric Method: Potentials and Limitations," Energies, MDPI, vol. 11(2), pages 1-17, February.
    7. Bienvenido-Huertas, David & Moyano, Juan & Rodríguez-Jiménez, Carlos E. & Marín, David, 2019. "Applying an artificial neural network to assess thermal transmittance in walls by means of the thermometric method," Applied Energy, Elsevier, vol. 233, pages 1-14.
    8. Francesco Fiorito & Giandomenico Vurro & Francesco Carlucci & Ludovica Maria Campagna & Mariella De Fino & Salvatore Carlucci & Fabio Fatiguso, 2022. "Adaptation of Users to Future Climate Conditions in Naturally Ventilated Historic Buildings: Effects on Indoor Comfort," Energies, MDPI, vol. 15(14), pages 1-21, July.
    9. Andrea Salandin & Alberto Quintana-Gallardo & Vicente Gómez-Lozano & Ignacio Guillén-Guillamón, 2022. "The First 3D-Printed Building in Spain: A Study on Its Acoustic, Thermal and Environmental Performance," Sustainability, MDPI, vol. 14(20), pages 1-20, October.
    10. Luca Caruso & Vincent M. Buhagiar & Simon P. Borg, 2023. "The Double C Block Project: Thermal Performance of an Innovative Concrete Masonry Unit with Embedded Insulation," Sustainability, MDPI, vol. 15(6), pages 1-19, March.
    11. Doo Sung Choi & Myeong Jin Ko, 2019. "Analysis of Convergence Characteristics of Average Method Regulated by ISO 9869-1 for Evaluating In Situ Thermal Resistance and Thermal Transmittance of Opaque Exterior Walls," Energies, MDPI, vol. 12(10), pages 1-18, May.
    12. Carlo Andrea Bollino & Francesco Asdrubali & Paolo Polinori & Simona Bigerna & Silvia Micheli & Claudia Guattari & Antonella Rotili, 2017. "A Note on Medium- and Long-Term Global Energy Prospects and Scenarios," Sustainability, MDPI, vol. 9(5), pages 1-25, May.
    13. Paola Marrone & Paola Gori & Francesco Asdrubali & Luca Evangelisti & Laura Calcagnini & Gianluca Grazieschi, 2018. "Energy Benchmarking in Educational Buildings through Cluster Analysis of Energy Retrofitting," Energies, MDPI, vol. 11(3), pages 1-20, March.
    14. Xun Liu & Zhenhan Ding & Xiaobo Li & Zhiyuan Xue, 2023. "Research Progress, Hotspots, and Trends of Using BIM to Reduce Building Energy Consumption: Visual Analysis Based on WOS Database," IJERPH, MDPI, vol. 20(4), pages 1-21, February.
    15. Bienvenido-Huertas, David & Rubio-Bellido, Carlos & Solís-Guzmán, Jaime & Oliveira, Miguel José, 2020. "Experimental characterisation of the periodic thermal properties of walls using artificial intelligence," Energy, Elsevier, vol. 203(C).
    16. Cristina Cornaro & Gianluigi Bovesecchi & Filippo Calcerano & Letizia Martinelli & Elena Gigliarelli, 2023. "An HBIM Integrated Approach Using Non-Destructive Techniques (NDT) to Support Energy and Environmental Improvement of Built Heritage: The Case Study of Palazzo Maffei Borghese in Rome," Sustainability, MDPI, vol. 15(14), pages 1-36, July.
    17. Ye-Ji Lee & Ji-Hoon Moon & Doo-Sung Choi & Myeong-Jin Ko, 2024. "Influences of Average Temperature Difference and Measurement Period on Estimation of In Situ Thermal Transmittance of Building Exterior Walls Using the Average Method of ISO 9869-1," Energies, MDPI, vol. 17(5), pages 1-16, March.
    18. Doo Sung Choi & Myeong Jin Ko, 2017. "Comparison of Various Analysis Methods Based on Heat Flowmeters and Infrared Thermography Measurements for the Evaluation of the In Situ Thermal Transmittance of Opaque Exterior Walls," Energies, MDPI, vol. 10(7), pages 1-22, July.
    19. Sanjin Gumbarević & Bojan Milovanović & Bojana Dalbelo Bašić & Mergim Gaši, 2022. "Combining Deep Learning and the Heat Flux Method for In-Situ Thermal-Transmittance Measurement Improvement," Energies, MDPI, vol. 15(14), pages 1-19, July.
    20. Dashnor Hoxha & Brahim Ismail & Ancuța Rotaru & David Izabel & Thibaut Renaux, 2022. "Assessment of the Usability of Some Bio-Based Insulation Materials in Double-Skin Steel Envelopes," Sustainability, MDPI, vol. 14(17), pages 1-28, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:15:p:5714-:d:1207106. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.