IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i14p5118-d862237.html
   My bibliography  Save this article

An Industrial Approach for the Optimization of a New Performing Coated Adsorber for Adsorption Heat Pumps

Author

Listed:
  • Luigi Calabrese

    (Department of Engineering, University of Messina, Contrada di Dio Sant’Agata, 98166 Messina, Italy
    CNR-ICCOM—Istituto di Chimica dei Composti Organometallici, Via G. Moruzzi 1, 56124 Pisa, Italy)

  • Walter Mittelbach

    (Sorption Technologies GmbH, Christaweg 52, 79114 Freiburg, Germany)

  • Lucio Bonaccorsi

    (CNR-ICCOM—Istituto di Chimica dei Composti Organometallici, Via G. Moruzzi 1, 56124 Pisa, Italy
    Department of Civil, Energetic, Environmental and Materials Engineering, Mediterranean University of Reggio Calabria, 89134 Reggio Calabria, Italy)

  • Angelo Freni

    (CNR-ICCOM—Istituto di Chimica dei Composti Organometallici, Via G. Moruzzi 1, 56124 Pisa, Italy)

Abstract

In the present work, the optimization of a new coating formulation was investigated, taking attention to an industrially focused research approach used for the engineering design of the adsorber. The adsorbent was a composite zeolite or silica-gel based coating applied by using new flexible polymer matrices. The FC-80 formulation represents a good compromise between mechanical stability and absorption capacity. Using the developed coating process, a new compact HEX design was developed to reach the AHP target performance with easy and fast manufacturing. The specific cooling power of the coated heat exchanger was estimated to be about 500 W/kg of adsorbent. The new coated HEX was integrated in a new adsorption chiller and has been tested by a laboratory test-rig under realistic operating conditions. Results of preliminary testing demonstrated that the prototype provides a cooling capacity of around 10 kW with a COP of 0.54.

Suggested Citation

  • Luigi Calabrese & Walter Mittelbach & Lucio Bonaccorsi & Angelo Freni, 2022. "An Industrial Approach for the Optimization of a New Performing Coated Adsorber for Adsorption Heat Pumps," Energies, MDPI, vol. 15(14), pages 1-14, July.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:5118-:d:862237
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/14/5118/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/14/5118/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Freni, A. & Calabrese, L. & Malara, A. & Frontera, P. & Bonaccorsi, L., 2019. "Silica gel microfibres by electrospinning for adsorption chillers," Energy, Elsevier, vol. 187(C).
    2. Cabeza, Luisa F. & Solé, Aran & Barreneche, Camila, 2017. "Review on sorption materials and technologies for heat pumps and thermal energy storage," Renewable Energy, Elsevier, vol. 110(C), pages 3-39.
    3. Calabrese, L. & Bonaccorsi, L. & Bruzzaniti, P. & Proverbio, E. & Freni, A., 2019. "SAPO-34 based zeolite coatings for adsorption heat pumps," Energy, Elsevier, vol. 187(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Niknam, Pouriya H. & Fisher, Robin & Ciappi, Lorenzo & Sciacovelli, Adriano, 2024. "Optimally integrated waste heat recovery through combined emerging thermal technologies: Modelling, optimization and assessment for onboard multi-energy systems," Applied Energy, Elsevier, vol. 366(C).
    2. Larisa Gordeeva & Yuri Aristov, 2022. "Adsorbent Coatings for Adsorption Heat Transformation: From Synthesis to Application," Energies, MDPI, vol. 15(20), pages 1-25, October.
    3. Strelova, S.V. & Aristov, Yu. I. & Gordeeva, L.G., 2023. "Dynamics of water vapour sorption on composite LiCl/(silica gel): An innovative configuration of the adsorbent bed," Energy, Elsevier, vol. 283(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lucio Bonaccorsi & Antonio Fotia & Angela Malara & Patrizia Frontera, 2020. "Advanced Adsorbent Materials for Waste Energy Recovery," Energies, MDPI, vol. 13(17), pages 1-15, August.
    2. Oscar Banos & Sven Ohmann & Felix Alscher & Cornelia Breitkopf & Vicente Pacheco & Maja Glorius & Matthias Veit, 2020. "Systematic Analysis of Materials for Coated Adsorbers for Application in Adsorption Heat Pumps or Refrigeration Systems," Energies, MDPI, vol. 13(18), pages 1-16, September.
    3. Liu, Zijian & Lu, Ding & Tao, Shen & Chen, Rundong & Gong, Maoqiong, 2024. "Experimental study on using 85 °C low-grade heat to generate <120 °C steam by a temperature-distributed absorption heat transformer," Energy, Elsevier, vol. 299(C).
    4. Mikhail Tokarev, 2019. "A Double-Bed Adsorptive Heat Transformer for Upgrading Ambient Heat: Design and First Tests," Energies, MDPI, vol. 12(21), pages 1-14, October.
    5. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    6. Zhang, Y.N. & Wang, R.Z. & Li, T.X., 2017. "Experimental investigation on an open sorption thermal storage system for space heating," Energy, Elsevier, vol. 141(C), pages 2421-2433.
    7. Gordeeva, L.G. & Aristov, Yu.I., 2019. "Adsorptive heat storage and amplification: New cycles and adsorbents," Energy, Elsevier, vol. 167(C), pages 440-453.
    8. Chao, Jingwei & Xu, Jiaxing & Yan, Taisen & Xiang, Shizhao & Bai, Zhaoyuan & Wang, Ruzhu & Li, Tingxian, 2023. "Performance analysis of sorption thermal battery for high-density cold energy storage enabled by novel tube-free evaporator," Energy, Elsevier, vol. 273(C).
    9. Fumey, Benjamin & Weber, Robert & Baldini, Luca, 2023. "Heat transfer constraints and performance mapping of a closed liquid sorption heat storage process," Applied Energy, Elsevier, vol. 335(C).
    10. Ahmed Rezk & Abdul Ghani Olabi & Abdul Hai Alami & Ali Radwan & Hasan Demir & Shek Mohammod Atiqure Rahman & Sheikh Khaleduzzaman Shah & Mohammad Ali Abdelkareem, 2022. "Experimental Study on Utilizing Silica Gel with Ethanol and Water for Adsorption Heat Storage," Energies, MDPI, vol. 16(1), pages 1-15, December.
    11. Gbenou, Tadagbe Roger Sylvanus & Fopah-Lele, Armand & Wang, Kejian, 2022. "Macroscopic and microscopic investigations of low-temperature thermochemical heat storage reactors: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    12. Yıldız, Çağatay & Seçilmiş, Mustafa & Arıcı, Müslüm & Mert, Mehmet Selçuk & Nižetić, Sandro & Karabay, Hasan, 2023. "An experimental study on a solar-assisted heat pump incorporated with PCM based thermal energy storage unit," Energy, Elsevier, vol. 278(PB).
    13. Bi, Yuehong & Qin, Lifeng & Guo, Jimeng & Li, Hongyan & Zang, Gaoli, 2020. "Performance analysis of solar air conditioning system based on the independent-developed solar parabolic trough collector," Energy, Elsevier, vol. 196(C).
    14. Zhang, Yu & Wang, Weining & Zheng, Xu & Cai, Jinliang, 2024. "Recent progress on composite desiccants for adsorption-based dehumidification," Energy, Elsevier, vol. 302(C).
    15. Chao, Jingwei & Xu, Jiaxing & Yan, Taisen & Wang, Pengfei & Huo, Xiangyan & Wang, Ruzhu & Li, Tingxian, 2022. "Enhanced thermal conductivity and adsorption rate of zeolite 13X adsorbent by compression-induced molding method for sorption thermal battery," Energy, Elsevier, vol. 240(C).
    16. Xue Mi & Chao Chen & Haoqi Fu & Gongcheng Li & Yongxiang Jiao & Fengtao Han, 2023. "Experimental Study on Heat Storage/Release Performances of Composite Phase Change Thermal Storage Heating Wallboards Based on Photovoltaic Electric-Thermal Systems," Energies, MDPI, vol. 16(6), pages 1-17, March.
    17. Feng, Changling & E, Jiaqiang & Han, Wei & Deng, Yuanwang & Zhang, Bin & Zhao, Xiaohuan & Han, Dandan, 2021. "Key technology and application analysis of zeolite adsorption for energy storage and heat-mass transfer process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    18. Clemens Huber & Saman Setoodeh Jahromy & Christian Jordan & Manfred Schreiner & Michael Harasek & Andreas Werner & Franz Winter, 2019. "Boric Acid: A High Potential Candidate for Thermochemical Energy Storage," Energies, MDPI, vol. 12(6), pages 1-17, March.
    19. An, G.L. & Wang, L.W. & Gao, J., 2019. "Two-stage cascading desorption cycle for sorption thermal energy storage," Energy, Elsevier, vol. 174(C), pages 1091-1099.
    20. Olaf Boeckmann & Drin Marmullaku & Micha Schaefer, 2024. "Dynamic Modeling and Simulation of a Facade-Integrated Adsorption System for Solar Cooling of Lightweight Buildings," Energies, MDPI, vol. 17(7), pages 1-29, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:5118-:d:862237. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.