IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i14p5095-d861251.html

Parametric Study on Thermo-Hydraulic Performance of NACA Airfoil Fin PCHEs Channels

Author

Listed:
  • Wei Wang

    (School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

  • Liang Ding

    (School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

  • Fangming Han

    (Aerospace Haiying (Harbin) Titanium Co., Ltd., Harbin 150001, China)

  • Yong Shuai

    (School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

  • Bingxi Li

    (School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

  • Bengt Sunden

    (Department of Energy Sciences, Lund University, SE 22100 Lund, Sweden)

Abstract

In this work, a discontinuous airfoil fin printed circuit heat exchanger (PCHE) was used as a recuperator in a micro gas turbine system. The effects of the airfoil fin geometry parameters (arc height, maximum arc height position, and airfoil thickness) and the airfoil fin arrangements (horizontal and vertical spacings) on the PCHE channel’s thermo-hydraulic performance were extensively examined by a numerical parametric study. The flow features, local heat transfer coefficient, and wall shear stress were examined in detail to obtain an enhanced heat transfer mechanism for a better PCHE design. The results show that the heat transfer and flow resistance were mainly increased at the airfoil leading edge owing to a flow jet, whereas the airfoil trailing edge had little effect on the thermo-hydraulic performance. The airfoil thickness was the most significant while the arc height and the vertical spacing were moderately significant to the performance. Moreover, only the airfoil thickness had a significant effect on the PCHE compactness. Based on a comprehensive investigation, two solutions NACA-6230 and -3220 were selected owing to their better thermal performance and smaller pressure drop, respectively, with horizontal spacings of 2 mm and vertical spacings of 2 or 3 mm.

Suggested Citation

  • Wei Wang & Liang Ding & Fangming Han & Yong Shuai & Bingxi Li & Bengt Sunden, 2022. "Parametric Study on Thermo-Hydraulic Performance of NACA Airfoil Fin PCHEs Channels," Energies, MDPI, vol. 15(14), pages 1-15, July.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:5095-:d:861251
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/14/5095/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/14/5095/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ali A. Hmad & Nihad Dukhan, 2021. "Cooling Design for PEM Fuel-Cell Stacks Employing Air and Metal Foam: Simulation and Experiment," Energies, MDPI, vol. 14(9), pages 1-19, May.
    2. Josip Batista & Anica Trp & Kristian Lenic, 2022. "Heat Transfer Enhancement of Crossflow Air-to-Water Fin-and-Tube Heat Exchanger by Using Delta-Winglet Type Vortex Generators," Energies, MDPI, vol. 15(6), pages 1-25, March.
    3. Jiang, Yuan & Liese, Eric & Zitney, Stephen E. & Bhattacharyya, Debangsu, 2018. "Design and dynamic modeling of printed circuit heat exchangers for supercritical carbon dioxide Brayton power cycles," Applied Energy, Elsevier, vol. 231(C), pages 1019-1032.
    4. Xiao, Gang & Yang, Tianfeng & Liu, Huanlei & Ni, Dong & Ferrari, Mario Luigi & Li, Mingchun & Luo, Zhongyang & Cen, Kefa & Ni, Mingjiang, 2017. "Recuperators for micro gas turbines: A review," Applied Energy, Elsevier, vol. 197(C), pages 83-99.
    5. Miftah Altwieb & Rakesh Mishra & Aliyu M. Aliyu & Krzysztof J. Kubiak, 2022. "Heat Transfer Enhancement by Perforated and Louvred Fin Heat Exchangers," Energies, MDPI, vol. 15(2), pages 1-16, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ma, Wenting & Hu, Zicheng & Zhang, Haiyan & El-Mesery, Hany S. & Workneh, Tilahun Seyoum & Wang, Zhentao, 2026. "A review of thermal-hydraulic performance in airfoil fin printed circuit heat exchangers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PE).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yan, Yunfei & Meng, Xiaoyue & Wang, Dandan & Wu, Yonghong & Zhang, Chenghua & Zhao, Xuelin, 2025. "Optimized cold-end structure in a MTPV-MTEG utilization system: Analysis of combustion characteristics and energy efficiency," Energy, Elsevier, vol. 336(C).
    2. Hajialigol, Najmeh & Daghigh, Roonak, 2025. "A novel flare gas recycling system for distributed energy, renewable fuel, and purified water production: Multi-objective 4E analysis and optimization," Energy, Elsevier, vol. 334(C).
    3. Hossein Pourrahmani & Hamed Shakeri & Jan Van herle, 2022. "Thermoelectric Generator as the Waste Heat Recovery Unit of Proton Exchange Membrane Fuel Cell: A Numerical Study," Energies, MDPI, vol. 15(9), pages 1-21, April.
    4. Thanganadar, Dhinesh & Fornarelli, Francesco & Camporeale, Sergio & Asfand, Faisal & Patchigolla, Kumar, 2021. "Off-design and annual performance analysis of supercritical carbon dioxide cycle with thermal storage for CSP application," Applied Energy, Elsevier, vol. 282(PA).
    5. Rajabi, Mahsa & Mehrpooya, Mehdi & Haibo, Zhao & Huang, Zhen, 2019. "Chemical looping technology in CHP (combined heat and power) and CCHP (combined cooling heating and power) systems: A critical review," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    6. Chen, Jinli & Xiao, Gang & Ferrari, Mario Luigi & Yang, Tianfeng & Ni, Mingjiang & Cen, Kefa, 2020. "Dynamic simulation of a solar-hybrid microturbine system with experimental validation of main parts," Renewable Energy, Elsevier, vol. 154(C), pages 187-200.
    7. Roberta De Robbio, 2023. "Micro Gas Turbine Role in Distributed Generation with Renewable Energy Sources," Energies, MDPI, vol. 16(2), pages 1-37, January.
    8. Zhang, Chengyu & Gümmer, Volker, 2020. "Multi-objective optimization and system evaluation of recuperated helicopter turboshaft engines," Energy, Elsevier, vol. 191(C).
    9. Ma, Teng & Li, Ming-Jia & Xu, Jin-Liang & Cao, Feng, 2019. "Thermodynamic analysis and performance prediction on dynamic response characteristic of PCHE in 1000 MW S-CO2 coal fired power plant," Energy, Elsevier, vol. 175(C), pages 123-138.
    10. Ruiz-Casanova, Eduardo & Rubio-Maya, Carlos & Ambriz-Díaz, Víctor M. & Gutiérrez Martínez, A., 2024. "Energy, exergy and exergoeconomic analyses and ANN-based three-objective optimization of a supercritical CO2 recompression Brayton cycle driven by a high-temperature geothermal reservoir," Energy, Elsevier, vol. 311(C).
    11. Ma, Teng & Li, Ming-Jia & Xu, Hang, 2024. "Thermal energy storage capacity configuration and energy distribution scheme for a 1000MWe S–CO2 coal-fired power plant to realize high-efficiency full-load adjustability," Energy, Elsevier, vol. 294(C).
    12. Deng, Tianrui & Li, Xionghui & Wang, Qiuwang & Ma, Ting, 2019. "Dynamic modelling and transient characteristics of supercritical CO2 recompression Brayton cycle," Energy, Elsevier, vol. 180(C), pages 292-302.
    13. Yao, Lichao & Zou, Zhengping, 2020. "A one-dimensional design methodology for supercritical carbon dioxide Brayton cycles: Integration of cycle conceptual design and components preliminary design," Applied Energy, Elsevier, vol. 276(C).
    14. Chen, Wangnan & Ma, Qiyuan & Liu, Xinyi & Cheng, Yang & Wang, Qiuwang & Ma, Ting, 2024. "Adaptability analysis of flow and heat transfer multi-scale numerical method for printed circuit heat exchanger," Energy, Elsevier, vol. 311(C).
    15. Lou, Juwei & Wang, Jiangfeng & Luo, Fang & Chen, Weidong & Chen, Liangqi & Islam, M.R. & Chua, K.J., 2025. "Enhanced performance evaluation and operational regulation of a novel combined cooling and power system using machine learning," Energy, Elsevier, vol. 333(C).
    16. Panupon Trairat & Sakda Somkun & Tanakorn Kaewchum & Tawat Suriwong & Pisit Maneechot & Teerapon Panpho & Wikarn Wansungnern & Sathit Banthuek & Bongkot Prasit & Tanongkiat Kiatsiriroat, 2023. "Grid Integration of Livestock Biogas Using Self-Excited Induction Generator and Spark-Ignition Engine," Energies, MDPI, vol. 16(13), pages 1-23, June.
    17. Zhao, Tian & Li, Hang & Li, Xia & Sun, Qing-Han & Fang, Xuan-Yi & Ma, Huan & Chen, Qun, 2024. "A frequency domain dynamic simulation method for heat exchangers and thermal systems," Energy, Elsevier, vol. 286(C).
    18. Kewei Wang & Yonghong Huang & Yanbo Liu & Tao Huang & Shijia Zang, 2025. "A Review of Optimization Scheduling for Active Distribution Networks with High-Penetration Distributed Generation Access," Energies, MDPI, vol. 18(15), pages 1-23, August.
    19. Ercelik, Mustafa & Ismail, Mohammed S. & Ingham, Derek B. & Hughes, Kevin J. & Ma, Lin & Pourkashanian, Mohamed, 2023. "Efficient X-ray CT-based numerical computations of structural and mass transport properties of nickel foam-based GDLs for PEFCs," Energy, Elsevier, vol. 262(PB).
    20. Rovense, Francesco & Sebastián, Andrés & Abbas, Rubén & Romero, Manuel & González-Aguilar, José, 2023. "Performance map analysis of a solar-driven and fully unfired closed-cycle micro gas turbine," Energy, Elsevier, vol. 263(PB).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:5095-:d:861251. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager The email address of this maintainer does not seem to be valid anymore. Please ask MDPI Indexing Manager to update the entry or send us the correct address (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.