IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i23p7876-d686858.html
   My bibliography  Save this article

A Technical Analysis of Solid Recovered Fuel from Torrefied Jatropha Seed Residue via a Two-Stage Mechanical Screw Press and Solvent Extraction Process

Author

Listed:
  • Min-Hao Yuan

    (Department of Occupational Safety and Health, China Medical University, Taichung 406, Taiwan)

  • Chia-Chi Chang

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Tsung-Chi Hsu

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Je-Lueng Shie

    (Department of Environmental Engineering, National I-Lan University, Yi-Lan 260, Taiwan)

  • Yi-Hung Chen

    (Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei 106, Taiwan)

  • Ching-Yuan Chang

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Cheng-Fang Lin

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Chang-Ping Yu

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Chao-Hsiung Wu

    (Department of Environmental Engineering, Da-Yeh University, Changhua 515, Taiwan)

  • Manh Van Do

    (Institute of Environmental Technology, Vietnam Academy of Science and Technology, Hanoi 1000000, Vietnam)

  • Far-Ching Lin

    (Department of Forestry and Resource Conservation, National Taiwan University, Taipei 106, Taiwan)

  • Duu-Jong Lee

    (Department of Chemical Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Bo-Liang Liu

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Yen-Hau Chen

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

  • Michael Huang

    (Graduate Institute of Environmental Engineering, National Taiwan University, Taipei 106, Taiwan)

Abstract

This study investigated the torrefaction of de-oiled Jatropha seed residue after a two-stage sequential process consisting of mechanical screw pressing and solvent extraction using n-hexane (denoted as JMS). The optimal torrefaction temperature (T r ) and torrefaction time (t r ) were determined in the ranges of 260–300 °C and 10–60 min, respectively, so to achieve a better heating value and satisfactory energy densification (E D ) with acceptable mass loss. Thermogravimetric analysis was employed to elucidate the thermal decomposition behaviors of JMS. By comparison with the torrefaction of Jatropha seed residue after mechanical oil extraction by screw pressing only (namely, JME T ), the results indicated that the E D of the torrefaction of JMS yielding the torrefied product JMS T (two-stage product) was higher than that of the torrefaction of JME giving the torrefied product JME T (single-stage product). Further, it was found that JME T contained some tar, which was attributed to a thermal reaction in the residual oil in JME during torrefaction. The tar/oil content of JME T was about 1.0–1.8 wt.% in the determined optimal conditions. Thus, the enhanced recovery of the residual oil is advantageous not only because it allows obtaining more oil from Jatropha seed residue with a positive net energy gain but also because it prevents the formation of tar in torrefied biomass products.

Suggested Citation

  • Min-Hao Yuan & Chia-Chi Chang & Tsung-Chi Hsu & Je-Lueng Shie & Yi-Hung Chen & Ching-Yuan Chang & Cheng-Fang Lin & Chang-Ping Yu & Chao-Hsiung Wu & Manh Van Do & Far-Ching Lin & Duu-Jong Lee & Bo-Lian, 2021. "A Technical Analysis of Solid Recovered Fuel from Torrefied Jatropha Seed Residue via a Two-Stage Mechanical Screw Press and Solvent Extraction Process," Energies, MDPI, vol. 14(23), pages 1-13, November.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:23:p:7876-:d:686858
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/23/7876/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/23/7876/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hsu, Tsung-Chi & Chang, Chia-Chi & Yuan, Min-Hao & Chang, Ching-Yuan & Chen, Yi-Hung & Lin, Cheng-Fang & Ji, Dar-Ren & Shie, Je-Lueng & Manh, Do Van & Wu, Chao-Hsiung & Chiang, Sheng-Wei & Lin, Far-Ch, 2018. "Upgrading of Jatropha-seed residue after mechanical extraction of oil via torrefaction," Energy, Elsevier, vol. 142(C), pages 773-781.
    2. Divakara, B.N. & Upadhyaya, H.D. & Wani, S.P. & Gowda, C.L. Laxmipathi, 2010. "Biology and genetic improvement of Jatropha curcas L.: A review," Applied Energy, Elsevier, vol. 87(3), pages 732-742, March.
    3. George Francis & Raphael Edinger & Klaus Becker, 2005. "A concept for simultaneous wasteland reclamation, fuel production, and socio‐economic development in degraded areas in India: Need, potential and perspectives of Jatropha plantations," Natural Resources Forum, Blackwell Publishing, vol. 29(1), pages 12-24, February.
    4. Gan, Yong Yang & Ong, Hwai Chyuan & Ling, Tau Chuan & Chen, Wei-Hsin & Chong, Cheng Tung, 2019. "Torrefaction of de-oiled Jatropha seed kernel biomass for solid fuel production," Energy, Elsevier, vol. 170(C), pages 367-374.
    5. Marwa G. Saad & Noura S. Dosoky & Mohamed S. Zoromba & Hesham M. Shafik, 2019. "Algal Biofuels: Current Status and Key Challenges," Energies, MDPI, vol. 12(10), pages 1-22, May.
    6. Margareta Novian Cahyanti & Tharaka Rama Krishna C. Doddapaneni & Marten Madissoo & Linnar Pärn & Indrek Virro & Timo Kikas, 2021. "Torrefaction of Agricultural and Wood Waste: Comparative Analysis of Selected Fuel Characteristics," Energies, MDPI, vol. 14(10), pages 1-19, May.
    7. Atabani, A.E. & Silitonga, A.S. & Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Badruddin, Irfan Anjum & Fayaz, H., 2013. "Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 211-245.
    8. Kongkasawan, Jinjuta & Nam, Hyungseok & Capareda, Sergio C., 2016. "Jatropha waste meal as an alternative energy source via pressurized pyrolysis: A study on temperature effects," Energy, Elsevier, vol. 113(C), pages 631-642.
    9. Andrzej Białowiec & Monika Micuda & Jacek A. Koziel, 2018. "Waste to Carbon: Densification of Torrefied Refuse-Derived Fuel," Energies, MDPI, vol. 11(11), pages 1-20, November.
    10. No, Soo-Young, 2011. "Inedible vegetable oils and their derivatives for alternative diesel fuels in CI engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 131-149, January.
    11. Michael Huang & Chia-Chi Chang & Min-Hao Yuan & Ching-Yuan Chang & Chao-Hsiung Wu & Je-Lueng Shie & Yen-Hau Chen & Yi-Hung Chen & Chungfang Ho & Wei-Ren Chang & Tzu-Yi Yang & Far-Ching Lin, 2017. "Production of Torrefied Solid Bio-Fuel from Pulp Industry Waste," Energies, MDPI, vol. 10(7), pages 1-13, July.
    12. Petr Procházka & Luboš Smutka & Vladimír Hönig, 2019. "Using Biofuels for Highly Renewable Electricity Systems: A Case Study of the Jatropha curcas," Energies, MDPI, vol. 12(15), pages 1-17, August.
    13. Collard, François-Xavier & Blin, Joël, 2014. "A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 594-608.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ewunie, Gebresilassie Asnake & Morken, John & Lekang, Odd Ivar & Yigezu, Zerihun Demrew, 2021. "Factors affecting the potential of Jatropha curcas for sustainable biodiesel production: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    2. Silitonga, A.S. & Masjuki, H.H. & Mahlia, T.M.I. & Ong, H.C. & Atabani, A.E. & Chong, W.T., 2013. "A global comparative review of biodiesel production from jatropha curcas using different homogeneous acid and alkaline catalysts: Study of physical and chemical properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 514-533.
    3. Rozina, & Ahmad, Mushtaq & Zafar, Muhammad & Ali, Nasir & Lu, Houfang, 2017. "Biodiesel synthesis from Saussurea heteromalla (D.Don) Hand-Mazz integrating ethanol production using biorefinery approach," Energy, Elsevier, vol. 141(C), pages 1810-1818.
    4. Bhuiya, M.M.K. & Rasul, M.G. & Khan, M.M.K. & Ashwath, N. & Azad, A.K., 2016. "Prospects of 2nd generation biodiesel as a sustainable fuel—Part: 1 selection of feedstocks, oil extraction techniques and conversion technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 1109-1128.
    5. Rozina, & Asif, Saira & Ahmad, Mushtaq & Zafar, Muhammad & Ali, Nsir, 2017. "Prospects and potential of fatty acid methyl esters of some non-edible seed oils for use as biodiesel in Pakistan," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 687-702.
    6. Krishnamurthy, K.N. & Sridhara, S.N. & Ananda Kumar, C.S., 2018. "Synthesis and optimization of Hydnocarpus wightiana and dairy waste scum as feed stock for biodiesel production by using response surface methodology," Energy, Elsevier, vol. 153(C), pages 1073-1086.
    7. Prabhakar Sharma & Ajay Chhillar & Zafar Said & Saim Memon, 2021. "Exploring the Exhaust Emission and Efficiency of Algal Biodiesel Powered Compression Ignition Engine: Application of Box–Behnken and Desirability Based Multi-Objective Response Surface Methodology," Energies, MDPI, vol. 14(18), pages 1-22, September.
    8. Che Mat, S. & Idroas, M.Y. & Teoh, Y.H. & Hamid, M.F. & Sharudin, H. & Pahmi, M.A.A.H., 2022. "Optimization of ternary blends among refined palm oil-hexanol-melaleuca cajuputi oil and engine emissions analysis of the blends," Renewable Energy, Elsevier, vol. 196(C), pages 451-461.
    9. Costa, A.O. & Oliveira, L.B. & Lins, M.P.E. & Silva, A.C.M. & Araujo, M.S.M. & Pereira Jr., A.O. & Rosa, L.P., 2013. "Sustainability analysis of biodiesel production: A review on different resources in Brazil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 407-412.
    10. Adrian Knapczyk & Sławomir Francik & Marcin Jewiarz & Agnieszka Zawiślak & Renata Francik, 2020. "Thermal Treatment of Biomass: A Bibliometric Analysis—The Torrefaction Case," Energies, MDPI, vol. 14(1), pages 1-31, December.
    11. Azad, A.K. & Rasul, M.G. & Khan, M.M.K. & Sharma, Subhash C. & Hazrat, M.A., 2015. "Prospect of biofuels as an alternative transport fuel in Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 331-351.
    12. Takase, Mohammed & Zhao, Ting & Zhang, Min & Chen, Yao & Liu, Hongyang & Yang, Liuqing & Wu, Xiangyang, 2015. "An expatiate review of neem, jatropha, rubber and karanja as multipurpose non-edible biodiesel resources and comparison of their fuel, engine and emission properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 495-520.
    13. Wan Ghazali, Wan Nor Maawa & Mamat, Rizalman & Masjuki, H.H. & Najafi, Gholamhassan, 2015. "Effects of biodiesel from different feedstocks on engine performance and emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 585-602.
    14. Silitonga, A.S. & Masjuki, H.H. & Mahlia, T.M.I. & Ong, H.C. & Chong, W.T. & Boosroh, M.H., 2013. "Overview properties of biodiesel diesel blends from edible and non-edible feedstock," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 346-360.
    15. Ramalingam, Senthil & Rajendran, Silambarasan & Ganesan, Pranesh & Govindasamy, Mohan, 2018. "Effect of operating parameters and antioxidant additives with biodiesels to improve the performance and reducing the emissions in a compression ignition engine – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 775-788.
    16. Kumar, Praveen & Srivastava, Vimal Chandra & Jha, Mithilesh Kumar, 2016. "Jatropha curcas phytotomy and applications: Development as a potential biofuel plant through biotechnological advancements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 818-838.
    17. Hao Luo & Lukasz Niedzwiecki & Amit Arora & Krzysztof Mościcki & Halina Pawlak-Kruczek & Krystian Krochmalny & Marcin Baranowski & Mayank Tiwari & Anshul Sharma & Tanuj Sharma & Zhimin Lu, 2020. "Influence of Torrefaction and Pelletizing of Sawdust on the Design Parameters of a Fixed Bed Gasifier," Energies, MDPI, vol. 13(11), pages 1-19, June.
    18. Mardhiah, H. Haziratul & Ong, Hwai Chyuan & Masjuki, H.H. & Lim, Steven & Lee, H.V., 2017. "A review on latest developments and future prospects of heterogeneous catalyst in biodiesel production from non-edible oils," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1225-1236.
    19. Kacper Świechowski & Martyna Hnat & Paweł Stępień & Sylwia Stegenta-Dąbrowska & Szymon Kugler & Jacek A. Koziel & Andrzej Białowiec, 2020. "Waste to Energy: Solid Fuel Production from Biogas Plant Digestate and Sewage Sludge by Torrefaction-Process Kinetics, Fuel Properties, and Energy Balance," Energies, MDPI, vol. 13(12), pages 1-37, June.
    20. da Silva, Jean Constantino Gomes & Pereira, Jefferson Leque Claudio & Andersen, Silvia Layara Floriani & Moreira, Regina de Fatima Peralta Muniz & José, Humberto Jorge, 2020. "Torrefaction of ponkan peel waste in tubular fixed-bed reactor: In-depth bioenergetic evaluation of torrefaction products," Energy, Elsevier, vol. 210(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:23:p:7876-:d:686858. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.