IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i19p6261-d648259.html
   My bibliography  Save this article

Assessing the Risk to Indoor Thermal Environments on Industrial Sites Offering AHU Capacity for Demand Response

Author

Listed:
  • Alexander Brem

    (Department of Mechanical, Biomedical and Manufacturing Engineering, Munster Technological University, Bishopstown, T12 P928 Cork, Ireland
    Intelligent Efficiency Research Group (IERG), Department of Civil and Environmental Engineering, University College Cork, College Road, T12 K8AF Cork, Ireland
    DePuy Ireland Unlimited Company, Loughbeg, Ringaskiddy, P43 NP38 Cork, Ireland)

  • Ken Bruton

    (Intelligent Efficiency Research Group (IERG), Department of Civil and Environmental Engineering, University College Cork, College Road, T12 K8AF Cork, Ireland)

  • Paul D. O’Sullivan

    (Department of Process, Energy and Transport Engineering, Munster Technological University, Bishopstown, T12 P928 Cork, Ireland)

Abstract

Increasing participation in demand response within the industrial sector may be crucial to growing the levels of available flexible capacity required to reliably control national electricity grids as renewable generation increases to satisfy emission targets. This research aims to assist the uptake of demand response in the industrial sector by investigating risk to indoor thermal environments on industrial sites offering air handling unit capacity for demand response. This evaluation uses a systematic model-based approach, calibrated and validated with empirical data from a relevant case study industrial building to assess risk through a number of scenarios. The conditions investigated cover several relevant grid response times and durations, and national and international extreme external ambient temperatures in the past, present and future under a variety of temperature limits. The study demonstrated that there is very low risk to the case study site participating in demand response, with only 15 of 264 initial and 284 of 936 total scenarios triggering any risk. The major factors affecting risk levels identified were more stringent temperature limits and the influence of more extreme climates. The development and implementation of this concept has considerable potential to benefit industrial participants and the wider national electricity grids.

Suggested Citation

  • Alexander Brem & Ken Bruton & Paul D. O’Sullivan, 2021. "Assessing the Risk to Indoor Thermal Environments on Industrial Sites Offering AHU Capacity for Demand Response," Energies, MDPI, vol. 14(19), pages 1-28, October.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:19:p:6261-:d:648259
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/19/6261/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/19/6261/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Gourlis, Georgios & Kovacic, Iva, 2017. "Passive measures for preventing summer overheating in industrial buildings under consideration of varying manufacturing process loads," Energy, Elsevier, vol. 137(C), pages 1175-1185.
    2. Chen, Yongbao & Chen, Zhe & Xu, Peng & Li, Weilin & Sha, Huajing & Yang, Zhiwei & Li, Guowen & Hu, Chonghe, 2019. "Quantification of electricity flexibility in demand response: Office building case study," Energy, Elsevier, vol. 188(C).
    3. Bianchini, Gianni & Casini, Marco & Vicino, Antonio & Zarrilli, Donato, 2016. "Demand-response in building heating systems: A Model Predictive Control approach," Applied Energy, Elsevier, vol. 168(C), pages 159-170.
    4. O' Donovan, Adam & O' Sullivan, Paul D. & Murphy, Michael D., 2019. "Predicting air temperatures in a naturally ventilated nearly zero energy building: Calibration, validation, analysis and approaches," Applied Energy, Elsevier, vol. 250(C), pages 991-1010.
    5. Utama, Christian & Troitzsch, Sebastian & Thakur, Jagruti, 2021. "Demand-side flexibility and demand-side bidding for flexible loads in air-conditioned buildings," Applied Energy, Elsevier, vol. 285(C).
    6. Michael D. Murphy & Paul D. O’Sullivan & Guilherme Carrilho da Graça & Adam O’Donovan, 2021. "Development, Calibration and Validation of an Internal Air Temperature Model for a Naturally Ventilated Nearly Zero Energy Building: Comparison of Model Types and Calibration Methods," Energies, MDPI, vol. 14(4), pages 1-24, February.
    7. Dababneh, Fadwa & Li, Lin & Sun, Zeyi, 2016. "Peak power demand reduction for combined manufacturing and HVAC system considering heat transfer characteristics," International Journal of Production Economics, Elsevier, vol. 177(C), pages 44-52.
    8. Pechmann, Agnes & Shrouf, Fadi & Chonin, Max & Steenhusen, Nanke, 2017. "Load-shifting potential at SMEs manufacturing sites: A methodology and case study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 431-438.
    9. Dranka, Géremi Gilson & Ferreira, Paula, 2019. "Review and assessment of the different categories of demand response potentials," Energy, Elsevier, vol. 179(C), pages 280-294.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alexander Brem & Dominic T. J. O’Sullivan & Ken Bruton, 2021. "Advancing the Industrial Sectors Participation in Demand Response within National Electricity Grids," Energies, MDPI, vol. 14(24), pages 1-26, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Alexander Brem & Dominic T. J. O’Sullivan & Ken Bruton, 2021. "Advancing the Industrial Sectors Participation in Demand Response within National Electricity Grids," Energies, MDPI, vol. 14(24), pages 1-26, December.
    2. Liu, Hong & Zhao, Yue & Gu, Chenghong & Ge, Shaoyun & Yang, Zan, 2021. "Adjustable capability of the distributed energy system: Definition, framework, and evaluation model," Energy, Elsevier, vol. 222(C).
    3. Chu, Wenfeng & Zhang, Yu & He, Wei & Zhang, Sheng & Hu, Zhongting & Ru, Bingqian & Ying, Shangxuan, 2023. "Research on flexible allocation strategy of power grid interactive buildings based on multiple optimization objectives," Energy, Elsevier, vol. 278(PB).
    4. Cao, Yujie & Cheng, Ming & Zhang, Sufang & Mao, Hongju & Wang, Peng & Li, Chao & Feng, Yihui & Ding, Zhaohao, 2022. "Data-driven flexibility assessment for internet data center towards periodic batch workloads," Applied Energy, Elsevier, vol. 324(C).
    5. Rosa Francesca De Masi & Antonio Gigante & Valentino Festa & Silvia Ruggiero & Giuseppe Peter Vanoli, 2021. "Effect of HVAC’s Management on Indoor Thermo-Hygrometric Comfort and Energy Balance: In Situ Assessments on a Real nZEB," Energies, MDPI, vol. 14(21), pages 1-30, November.
    6. Dranka, Géremi Gilson & Ferreira, Paula, 2020. "Load flexibility potential across residential, commercial and industrial sectors in Brazil," Energy, Elsevier, vol. 201(C).
    7. Wanapinit, Natapon & Thomsen, Jessica & Weidlich, Anke, 2022. "Integrating flexibility provision into operation planning: A generic framework to assess potentials and bid prices of end-users," Energy, Elsevier, vol. 261(PB).
    8. Vallianos, Charalampos & Candanedo, José & Athienitis, Andreas, 2023. "Application of a large smart thermostat dataset for model calibration and Model Predictive Control implementation in the residential sector," Energy, Elsevier, vol. 278(PA).
    9. Géremi Gilson Dranka & Paula Ferreira, 2020. "Electric Vehicles and Biofuels Synergies in the Brazilian Energy System," Energies, MDPI, vol. 13(17), pages 1-22, August.
    10. Hajo Terbrack & Thorsten Claus & Frank Herrmann, 2021. "Energy-Oriented Production Planning in Industry: A Systematic Literature Review and Classification Scheme," Sustainability, MDPI, vol. 13(23), pages 1-32, December.
    11. Weiwei Cui & Biao Lu, 2020. "A Bi-Objective Approach to Minimize Makespan and Energy Consumption in Flow Shops with Peak Demand Constraint," Sustainability, MDPI, vol. 12(10), pages 1-22, May.
    12. Shen, Meng & Li, Xiang & Lu, Yujie & Cui, Qingbin & Wei, Yi-Ming, 2021. "Personality-based normative feedback intervention for energy conservation," Energy Economics, Elsevier, vol. 104(C).
    13. Annala, Salla & Ruggiero, Salvatore & Kangas, Hanna-Liisa & Honkapuro, Samuli & Ohrling, Tiina, 2022. "Impact of home market on business development and internationalization of demand response firms," Energy, Elsevier, vol. 242(C).
    14. Azar, Elie & Nikolopoulou, Christina & Papadopoulos, Sokratis, 2016. "Integrating and optimizing metrics of sustainable building performance using human-focused agent-based modeling," Applied Energy, Elsevier, vol. 183(C), pages 926-937.
    15. Wei, Congying & Xu, Jian & Liao, Siyang & Sun, Yuanzhang & Jiang, Yibo & Ke, Deping & Zhang, Zhen & Wang, Jing, 2018. "A bi-level scheduling model for virtual power plants with aggregated thermostatically controlled loads and renewable energy," Applied Energy, Elsevier, vol. 224(C), pages 659-670.
    16. Wolf, Isabel & Holzapfel, Peter K.R. & Meschede, Henning & Finkbeiner, Matthias, 2023. "On the potential of temporally resolved GHG emission factors for load shifting: A case study on electrified steam generation," Applied Energy, Elsevier, vol. 348(C).
    17. Vahid-Ghavidel, Morteza & Shafie-khah, Miadreza & Javadi, Mohammad S. & Santos, Sérgio F. & Gough, Matthew & Quijano, Darwin A. & Catalao, Joao P.S., 2023. "Hybrid IGDT-stochastic self-scheduling of a distributed energy resources aggregator in a multi-energy system," Energy, Elsevier, vol. 265(C).
    18. Behboodi, Sahand & Chassin, David P. & Djilali, Ned & Crawford, Curran, 2018. "Transactive control of fast-acting demand response based on thermostatic loads in real-time retail electricity markets," Applied Energy, Elsevier, vol. 210(C), pages 1310-1320.
    19. Dranka, Géremi Gilson & Ferreira, Paula & Vaz, A. Ismael F., 2021. "A review of co-optimization approaches for operational and planning problems in the energy sector," Applied Energy, Elsevier, vol. 304(C).
    20. Awan, Muhammad Bilal & Sun, Yongjun & Lin, Wenye & Ma, Zhenjun, 2023. "A framework to formulate and aggregate performance indicators to quantify building energy flexibility," Applied Energy, Elsevier, vol. 349(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:19:p:6261-:d:648259. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.