IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i22p6118-d449169.html
   My bibliography  Save this article

An Investigation of Laboratory and Road Test of Common Rail Injection Vehicles Fueled with B20 Biodiesel

Author

Listed:
  • Iman K. Reksowardojo

    (Faculty of Mechanical and Aerospace Engineering, Institut Teknologi Bandung, Bandung 40135, Indonesia)

  • Hari Setiapraja

    (Agency for Assessment and Application of Technology, Jakarta 10340, Indonesia)

  • Rizqon Fajar

    (Agency for Assessment and Application of Technology, Jakarta 10340, Indonesia)

  • Edi Wibowo

    (Palm Oil Plantation Funds Management Agency, Jakarta 10310, Indonesia)

  • Dadan Kusdiana

    (Research and Development Agency of Energy and Mineral Resources, Ministry of Energy and Mineral Resources, Jakarta Pusat 10110, Indonesia)

Abstract

In this study, biodiesel fuel with a ratio of 20% volume (B20) was used on vehicles that are used in common rail injection systems, complying with Euro2 emission regulations. Laboratory and road tests were conducted to evaluate the effects of B20 on performance, emissions and engine components. Using diesel fuel and B20 as reference fuels, tests were conducted using Euro2 vehicle technology to investigate the effects on emissions, fuel consumption, and power. Durability testing was run for travel distances covering 40,000 km under various road and environmental conditions, while vehicle performance and emissions tests were conducted using the ECE R84-03 and ECE R101 test methods, respectively. The results show that B20 has lower CO and hydrocarbon (HC) emissions for every distance travelled, with an average of around 30%. Particulate emission was a bit lower, averaging 3.4% for B20 compared to B0, while NOx was found to slightly increase at around 2% for B20. Due to its lower calorific value, for an average distance traveled, the fuel economy of B20 was around 0.5% higher compared to B0. Furthermore, the maximum power of B20 was 3% lower compared to that of B0 for the entire distance traveled. However, an evaluation of engine components after 40,000 km showed that B20 and B0 were similar. Moreover, vehicles using B20 tend to have a comparable durability of engine components when compared with B0.

Suggested Citation

  • Iman K. Reksowardojo & Hari Setiapraja & Rizqon Fajar & Edi Wibowo & Dadan Kusdiana, 2020. "An Investigation of Laboratory and Road Test of Common Rail Injection Vehicles Fueled with B20 Biodiesel," Energies, MDPI, vol. 13(22), pages 1-15, November.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:22:p:6118-:d:449169
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/22/6118/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/22/6118/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Liaquat, A.M. & Masjuki, H.H. & Kalam, M.A. & Fazal, M.A. & Khan, Abdul Faheem & Fayaz, H. & Varman, M., 2013. "Impact of palm biodiesel blend on injector deposit formation," Applied Energy, Elsevier, vol. 111(C), pages 882-893.
    2. Yoyon Wahyono & Hadiyanto Hadiyanto & Mochamad Arief Budihardjo & Joni Safaat Adiansyah, 2020. "Assessing the Environmental Performance of Palm Oil Biodiesel Production in Indonesia: A Life Cycle Assessment Approach," Energies, MDPI, vol. 13(12), pages 1-25, June.
    3. Channappagoudra, Manjunath & Ramesh, K. & Manavendra, G., 2019. "Comparative study of standard engine and modified engine with different piston bowl geometries operated with B20 fuel blend," Renewable Energy, Elsevier, vol. 133(C), pages 216-232.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Maciej Bajerlein & Wojciech Karpiuk & Rafał Smolec, 2021. "Use of Gas Desorption Effect in Injection Systems of Diesel Engines," Energies, MDPI, vol. 14(1), pages 1-22, January.
    2. Barouch Giechaskiel & Dimitrios Komnos & Georgios Fontaras, 2021. "Impacts of Extreme Ambient Temperatures and Road Gradient on Energy Consumption and CO 2 Emissions of a Euro 6d-Temp Gasoline Vehicle," Energies, MDPI, vol. 14(19), pages 1-20, September.
    3. Simón Martínez-Martínez & Oscar A. de la Garza & Miguel García-Yera & Ricardo Martínez-Carrillo & Fausto A. Sánchez-Cruz, 2021. "Hydraulic Interactions between Injection Events Using Multiple Injection Strategies and a Solenoid Diesel Injector," Energies, MDPI, vol. 14(11), pages 1-11, May.
    4. Nadir Yilmaz & Alpaslan Atmanli & Matthew J. Hall & Francisco M. Vigil, 2022. "Determination of the Optimum Blend Ratio of Diesel, Waste Oil Derived Biodiesel and 1-Pentanol Using the Response Surface Method," Energies, MDPI, vol. 15(14), pages 1-16, July.
    5. Suprava Chakraborty & Nallapaneni Manoj Kumar & Arunkumar Jayakumar & Santanu Kumar Dash & Devaraj Elangovan, 2021. "Selected Aspects of Sustainable Mobility Reveals Implementable Approaches and Conceivable Actions," Sustainability, MDPI, vol. 13(22), pages 1-31, November.
    6. Iman K. Reksowardojo & Hari Setiapraja & Mokhtar & Siti Yubaidah & Dieni Mansur & Agnes K. Putri, 2023. "A Study on Utilization of High-Ratio Biodiesel and Pure Biodiesel in Advanced Vehicle Technologies," Energies, MDPI, vol. 16(2), pages 1-14, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Doppalapudi, A.T. & Azad, A.K. & Khan, M.M.K., 2021. "Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    2. Teoh, Y.H. & How, H.G. & Masjuki, H.H. & Nguyen, H.-T. & Kalam, M.A. & Alabdulkarem, A., 2019. "Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends," Renewable Energy, Elsevier, vol. 136(C), pages 521-534.
    3. Arun Teja Doppalapudi & Abul Kalam Azad & Mohammad Masud Kamal Khan, 2023. "Analysis of Improved In-Cylinder Combustion Characteristics with Chamber Modifications of the Diesel Engine," Energies, MDPI, vol. 16(6), pages 1-18, March.
    4. Xu, Leilei & Bai, Xue-Song & Li, Yaopeng & Treacy, Mark & Li, Changle & Tunestål, Per & Tunér, Martin & Lu, Xingcai, 2020. "Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions," Applied Energy, Elsevier, vol. 280(C).
    5. Mahmudul, H.M. & Hagos, F.Y. & Mamat, R. & Adam, A. Abdul & Ishak, W.F.W. & Alenezi, R., 2017. "Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 497-509.
    6. Dong Lin Loo & Yew Heng Teoh & Heoy Geok How & Jun Sheng Teh & Liviu Catalin Andrei & Slađana Starčević & Farooq Sher, 2021. "Applications Characteristics of Different Biodiesel Blends in Modern Vehicles Engines: A Review," Sustainability, MDPI, vol. 13(17), pages 1-31, August.
    7. Reddy, M. Sarveshwar & Sharma, Nikhil & Agarwal, Avinash Kumar, 2016. "Effect of straight vegetable oil blends and biodiesel blends on wear of mechanical fuel injection equipment of a constant speed diesel engine," Renewable Energy, Elsevier, vol. 99(C), pages 1008-1018.
    8. Rajaeifar, Mohammad Ali & Tabatabaei, Meisam & Aghbashlo, Mortaza & Nizami, Abdul-Sattar & Heidrich, Oliver, 2019. "Emissions from urban bus fleets running on biodiesel blends under real-world operating conditions: Implications for designing future case studies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 276-292.
    9. Shahir, V.K. & Jawahar, C.P. & Suresh, P.R., 2015. "Comparative study of diesel and biodiesel on CI engine with emphasis to emissions—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 686-697.
    10. T. M. Yunus Khan, 2020. "A Review of Performance-Enhancing Innovative Modifications in Biodiesel Engines," Energies, MDPI, vol. 13(17), pages 1-22, August.
    11. Altarazi, Yazan S.M. & Abu Talib, Abd Rahim & Yu, Jianglong & Gires, Ezanee & Abdul Ghafir, Mohd Fahmi & Lucas, John & Yusaf, Talal, 2022. "Effects of biofuel on engines performance and emission characteristics: A review," Energy, Elsevier, vol. 238(PC).
    12. Badawy, Tawfik & Attar, Mohammadreza Anbari & Hutchins, Peter & Xu, Hongming & Krueger Venus, Jens & Cracknell, Roger, 2018. "Investigation of injector coking effects on spray characteristic and engine performance in gasoline direct injection engines," Applied Energy, Elsevier, vol. 220(C), pages 375-394.
    13. Nabila, Rakhmawati & Hidayat, Wahyu & Haryanto, Agus & Hasanudin, Udin & Iryani, Dewi Agustina & Lee, Sihyun & Kim, Sangdo & Kim, Soohyun & Chun, Donghyuk & Choi, Hokyung & Im, Hyuk & Lim, Jeonghwan &, 2023. "Oil palm biomass in Indonesia: Thermochemical upgrading and its utilization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    14. Channappagoudra, Manjunath & Ramesh, K. & Manavendra, G., 2020. "Effect of injection timing on modified direct injection diesel engine performance operated with dairy scum biodiesel and Bio-CNG," Renewable Energy, Elsevier, vol. 147(P1), pages 1019-1032.
    15. Doppalapudi, A.T. & Azad, A.K. & Khan, M.M.K., 2023. "Advanced strategies to reduce harmful nitrogen-oxide emissions from biodiesel fueled engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 174(C).
    16. Karthickeyan, V., 2019. "Effect of combustion chamber bowl geometry modification on engine performance, combustion and emission characteristics of biodiesel fuelled diesel engine with its energy and exergy analysis," Energy, Elsevier, vol. 176(C), pages 830-852.
    17. Ali Qasemian & Sina Jenabi Haghparast & Pouria Azarikhah & Meisam Babaie, 2021. "Effects of Compression Ratio of Bio-Fueled SI Engines on the Thermal Balance and Waste Heat Recovery Potential," Sustainability, MDPI, vol. 13(11), pages 1-21, May.
    18. Phuang, Zhen Xin & Woon, Kok Sin & Wong, Khai Jian & Liew, Peng Yen & Hanafiah, Marlia Mohd, 2021. "Unlocking the environmental hotspots of palm biodiesel upstream production in Malaysia via life cycle assessment," Energy, Elsevier, vol. 232(C).
    19. Hamid, M. Fadzli & Idroas, M. Yusof & Mazlan, M. & Sa'ad, S. & Teoh, Y.H. & Che Mat, S. & Miskam, M.A. & Abdullah, M.K., 2022. "Methods for improving the in-cylinder airflow characteristics for sustainable transportation using fuels with higher viscosity: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    20. Jamshaid, M. & Masjuki, H.H. & Kalam, M.A. & Zulkifli, N.W.M. & Arslan, A. & Qureshi, A.A., 2022. "Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels," Energy, Elsevier, vol. 239(PA).

    More about this item

    Keywords

    biodiesel; B20; common rail; diesel; road test; performance; emission; engine component;
    All these keywords.

    JEL classification:

    • B20 - Schools of Economic Thought and Methodology - - History of Economic Thought since 1925 - - - General

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:22:p:6118-:d:449169. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.