IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i19p4995-d417783.html
   My bibliography  Save this article

Fast Pyrolysis of Lignin Pretreated with Magnesium Formate and Magnesium Hydroxide

Author

Listed:
  • Mayank Patel

    (Department of Chemical and Biomedical Engineering, University of Maine, Orono, ME 04469, USA)

  • Nick Hill

    (Department of Chemical and Biomedical Engineering, University of Maine, Orono, ME 04469, USA)

  • Charles A. Mullen

    (USDA-ARS, Eastern Regional Research Center, 600 E. Mermaid Lane, Wyndmoor, PA 19038, USA)

  • Sampath Gunukula

    (Department of Chemical and Biomedical Engineering, University of Maine, Orono, ME 04469, USA)

  • William J. DeSisto

    (Department of Chemical and Biomedical Engineering, University of Maine, Orono, ME 04469, USA)

Abstract

Kraft lignin (Indulin AT) pretreated with magnesium formate and magnesium hydroxide was fast-pyrolyzed in a continuously fed, bench-scale system. To avoid fouling issues typically associated with lignin pyrolysis, a simple laboratory test was used to determine suitable ranges of magnesium hydroxide and formic acid to lignin for feeding without plugging problems. Various feedstock formulations of lignin pretreated with magnesium hydroxide and formic acid were pyrolyzed. For comparison, calcium formate pretreated lignin was also tested. The organic oil yield ranged from 9% to 17% wt % on a lignin basis. Carbon yields in the oil ranged from 10% to 18% wt % on a lignin basis. Magnesium formate pretreatment increased oil yield and carbon yield in the oil up to 35% relative to the higher 1:1 g magnesium hydroxide/g lignin pretreatment. However, a lower magnesium hydroxide pretreatment (0.5:1 g magnesium hydroxide/g lignin) resulted in oil yields and carbon yields in the oils similar to the magnesium formate pretreatments. Magnesium formate pretreatment produced more oil but with a higher oxygen content than calcium formate under the same conditions. The GC-MS analysis of product oils indicated that phenols and aromatics were more prevalent in pyrolyzed magnesium-formate-pretreated lignin.

Suggested Citation

  • Mayank Patel & Nick Hill & Charles A. Mullen & Sampath Gunukula & William J. DeSisto, 2020. "Fast Pyrolysis of Lignin Pretreated with Magnesium Formate and Magnesium Hydroxide," Energies, MDPI, vol. 13(19), pages 1-10, September.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:19:p:4995-:d:417783
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/19/4995/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/19/4995/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Chio, Chonlong & Sain, Mohini & Qin, Wensheng, 2019. "Lignin utilization: A review of lignin depolymerization from various aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 107(C), pages 232-249.
    2. Marathe, P.S. & Westerhof, R.J.M. & Kersten, S.R.A., 2019. "Fast pyrolysis of lignins with different molecular weight: Experiments and modelling," Applied Energy, Elsevier, vol. 236(C), pages 1125-1137.
    3. Lee, Hyung Won & Kim, Young-Min & Jae, Jungho & Lee, Soo Min & Jung, Sang-Chul & Park, Young-Kwon, 2019. "The use of calcined seashell for the prevention of char foaming/agglomeration and the production of high-quality oil during the pyrolysis of lignin," Renewable Energy, Elsevier, vol. 144(C), pages 147-152.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Artem A. Medvedev & Daria A. Beldova & Konstantin B. Kalmykov & Alexey V. Kravtsov & Marina A. Tedeeva & Leonid M. Kustov & Sergey F. Dunaev & Alexander L. Kustov, 2022. "Carbon Dioxide Assisted Conversion of Hydrolysis Lignin Catalyzed by Nickel Compounds," Energies, MDPI, vol. 15(18), pages 1-12, September.
    2. Huang, Youwang & Wang, Haiyong & Zhang, Xinghua & Zhang, Qi & Wang, Chenguang & Ma, Longlong, 2022. "Accurate prediction of chemical exergy of technical lignins for exergy-based assessment on sustainable utilization processes," Energy, Elsevier, vol. 243(C).
    3. Djukić-Vuković, A. & Mladenović, D. & Ivanović, J. & Pejin, J. & Mojović, L., 2019. "Towards sustainability of lactic acid and poly-lactic acid polymers production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 238-252.
    4. Isa Hasanov & Merlin Raud & Timo Kikas, 2020. "The Role of Ionic Liquids in the Lignin Separation from Lignocellulosic Biomass," Energies, MDPI, vol. 13(18), pages 1-24, September.
    5. Guzelciftci, Begum & Park, Ki-Bum & Kim, Joo-Sik, 2020. "Production of phenol-rich bio-oil via a two-stage pyrolysis of wood," Energy, Elsevier, vol. 200(C).
    6. Guan, Weixiang & Chen, Xiao & Zhang, Jie & Hu, Haoquan & Liang, Changhai, 2020. "Catalytic transfer hydrogenolysis of lignin α-O-4 model compound 4-(benzyloxy)phenol and lignin over Pt/HNbWO6/CNTs catalyst," Renewable Energy, Elsevier, vol. 156(C), pages 249-259.
    7. Fan, Liangliang & Ruan, Roger & Li, Jun & Ma, Longlong & Wang, Chenguang & Zhou, Wenguang, 2020. "Aromatics production from fast co-pyrolysis of lignin and waste cooking oil catalyzed by HZSM-5 zeolite," Applied Energy, Elsevier, vol. 263(C).
    8. Tae Hoon Kim & Seung Hyeon Park & Seoku Lee & A.V.S.L. Sai Bharadwaj & Yang Soo Lee & Chang Geun Yoo & Tae Hyun Kim, 2023. "A Review of Biomass-Derived UV-Shielding Materials for Bio-Composites," Energies, MDPI, vol. 16(5), pages 1-27, February.
    9. Li, Haowei & Ma, Hongwei & Zhao, Weijie & Li, Xuehui & Long, Jinxing, 2019. "Upgrading lignin bio-oil for oxygen-containing fuel production using Ni/MgO: Effect of the catalyst calcination temperature," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    10. Wang, Shaoqing & Li, Zhihe & Yi, Weiming & Fu, Peng & Zhang, Andong & Bai, Xueyuan, 2021. "Renewable aromatic hydrocarbons production from catalytic pyrolysis of lignin with Al-SBA-15 and HZSM-5: Synergistic effect and coke behaviour," Renewable Energy, Elsevier, vol. 163(C), pages 1673-1681.
    11. Jalalifar, Salman & Masoudi, Mojtaba & Abbassi, Rouzbeh & Garaniya, Vikram & Ghiji, Mohammadmahdi & Salehi, Fatemeh, 2020. "A hybrid SVR-PSO model to predict a CFD-based optimised bubbling fluidised bed pyrolysis reactor," Energy, Elsevier, vol. 191(C).
    12. Alexandr Arshanitsa & Lilija Jashina & Matiss Pals & Jevgenija Ponomarenko & Yegor Akishin & Maja Zake, 2022. "Characteristics of the Main- and Side-Stream Products of Microwave Assisted Torrefaction of Lignocellulosic Biomass of Different Origination," Energies, MDPI, vol. 15(5), pages 1-20, March.
    13. Park, Gwon Woo & Gong, Gyeongtaek & Joo, Jeong Chan & Song, Jinju & Lee, Jiye & Lee, Joon-Pyo & Kim, Hee Taek & Ryu, Mi Hee & Sirohi, Ranjna & Zhuang, Xinshu & Min, Kyoungseon, 2022. "Recent progress and challenges in biological degradation and biotechnological valorization of lignin as an emerging source of bioenergy: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    14. Xiao, Ruirui & Yang, Wei & Cong, Xingshun & Dong, Kai & Xu, Jie & Wang, Dengfeng & Yang, Xin, 2020. "Thermogravimetric analysis and reaction kinetics of lignocellulosic biomass pyrolysis," Energy, Elsevier, vol. 201(C).
    15. Sharib Khan & Kait Kaarel Puss & Tiit Lukk & Mart Loog & Timo Kikas & Siim Salmar, 2022. "Enzymatic Conversion of Hydrolysis Lignin—A Potential Biorefinery Approach," Energies, MDPI, vol. 16(1), pages 1-13, December.
    16. Ahn, Byeongchan & Park, Chulhwan & Liu, J. Jay & Ok, Yong Sik & Won, Wangyun, 2023. "Maximizing the utilization of lignocellulosic biomass: Process development and analysis," Renewable Energy, Elsevier, vol. 215(C).
    17. Hegne Pupart & Piia Jõul & Melissa Ingela Bramanis & Tiit Lukk, 2023. "Characterization of the Ensemble of Lignin-Remodeling DyP-Type Peroxidases from Streptomyces coelicolor A3(2)," Energies, MDPI, vol. 16(3), pages 1-15, February.
    18. Poveda-Giraldo, Jhonny Alejandro & Solarte-Toro, Juan Camilo & Cardona Alzate, Carlos Ariel, 2021. "The potential use of lignin as a platform product in biorefineries: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    19. Ha, Jeong-Myeong & Hwang, Kyung-Ran & Kim, Young-Min & Jae, Jungho & Kim, Kwang Ho & Lee, Hyung Won & Kim, Jae-Young & Park, Young-Kwon, 2019. "Recent progress in the thermal and catalytic conversion of lignin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 422-441.
    20. Abraham Castro Garcia & Shuo Cheng & Jeffrey S. Cross, 2022. "Lignin Gasification: Current and Future Viability," Energies, MDPI, vol. 15(23), pages 1-17, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:19:p:4995-:d:417783. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.