2D Simulation for CH 4 Internal Reforming-SOFCs: An Approach to Study Performance Degradation and Optimization

Solid oxide fuel cells (SOFCs) are a well-developed technology, mainly used for combined heat and power production. High operating temperatures and anodic Ni-based materials allow for direct reforming reactions of CH 4 and other light hydrocarbons inside the cell. This feature favors a wider use of SOFCs that otherwise would be limited by the absence of a proper H 2 distribution network. This also permits the simplification of plant design avoiding additional units for upstream syngas production. In this context, control and knowledge of how variables such as temperature and gas composition are distributed on the cell surface are important to ensure good long-lasting performance. The aim of this work is to present a 2D modeling tool able to simulate SOFC performance working with direct internal CH 4 reforming. Initially thermodynamic and kinetic approaches are compared in order to tune the model assuming a biogas as feed. Thanks to the introduction of a matrix of coefficients to represent the local distribution of reforming active sites, the model considers degradation/poisoning phenomena. The same approach is also used to identify an optimized catalyst distribution that allows reducing critical working conditions in terms of temperature gradient, thus facilitating long-term applications.