IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v11y2018i6p1520-d151895.html
   My bibliography  Save this article

Boundary Conditions Accuracy Effect on the Numerical Simulations of the Thermal Performance of Building Elements

Author

Listed:
  • Paris A. Fokaides

    (School of Engineering, Frederick University, Nicosia 1036, Cyprus
    Faculty of Civil Engineering and Architecture, Kaunas University of Technology, Kaunas 51367, Lithuania)

  • Angeliki Kylili

    (School of Engineering, Frederick University, Nicosia 1036, Cyprus)

  • Ioannis Kyriakides

    (Department of Electrical and Computer Engineering, University of Nicosia, Nicosia 2147, Cyprus)

Abstract

Numerical simulation is widely used in the field of computational building physics for the definition of the thermal performance of building elements. An integral component of numerical simulation using finite elements is the boundary conditions, which, in the case of simulating the thermal performance of a building element, are usually expressed in terms of the external surface temperature as a function of time. The purpose of this study is to examine the effect of the accuracy of the boundary conditions on the thermal performance simulation of building elements. The assumption that the temperature versus time is a sinusoidal function, applied in standard methods, is comparatively assessed with the actual function for diverse climatic conditions using finite elements simulation. The findings of the analysis indicate that the sinusoidal function fails to accurately simulate real boundary conditions. The originality of this study lies within the adoption of a signal reconstruction algorithm, which follows a novel approach by reconstructing the actual temperature versus time signal for the simulation of the actual boundary conditions.

Suggested Citation

  • Paris A. Fokaides & Angeliki Kylili & Ioannis Kyriakides, 2018. "Boundary Conditions Accuracy Effect on the Numerical Simulations of the Thermal Performance of Building Elements," Energies, MDPI, vol. 11(6), pages 1-19, June.
    • Handle: RePEc:gam:jeners:v:11:y:2018:i:6:p:1520-:d:151895
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/11/6/1520/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/11/6/1520/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Fokaides, Paris A. & Christoforou, Elias A. & Kalogirou, Soteris A., 2014. "Legislation driven scenarios based on recent construction advancements towards the achievement of nearly zero energy dwellings in the southern European country of Cyprus," Energy, Elsevier, vol. 66(C), pages 588-597.
    2. Kontoleon, K.J. & Eumorfopoulou, E.A., 2008. "The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region," Renewable Energy, Elsevier, vol. 33(7), pages 1652-1664.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Paris A. Fokaides & Rasa Apanaviciene & Jurgita Černeckiene & Andrius Jurelionis & Egle Klumbyte & Vilma Kriauciunaite-Neklejonoviene & Darius Pupeikis & Donatas Rekus & Jolanta Sadauskiene & Lina Sed, 2020. "Research Challenges and Advancements in the field of Sustainable Energy Technologies in the Built Environment," Sustainability, MDPI, vol. 12(20), pages 1-20, October.
    2. Mergim Gaši & Bojan Milovanović & Marino Grozdek & Marina Bagarić, 2023. "Laplace and State-Space Methods for Calculating the Heat Losses in Case of Heavyweight Building Elements and Short Sampling Times," Energies, MDPI, vol. 16(11), pages 1-18, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kaska, Önder & Yumrutas, Recep & Arpa, Orhan, 2009. "Theoretical and experimental investigation of total equivalent temperature difference (TETD) values for building walls and flat roofs in Turkey," Applied Energy, Elsevier, vol. 86(5), pages 737-747, May.
    2. Yang, Jianming & Lin, Zhongqi & Wu, Huijun & Chen, Qingchun & Xu, Xinhua & Huang, Gongsheng & Fan, Liseng & Shen, Xujun & Gan, Keming, 2020. "Inverse optimization of building thermal resistance and capacitance for minimizing air conditioning loads," Renewable Energy, Elsevier, vol. 148(C), pages 975-986.
    3. Kalavala Shivaprakash Srivishnu & Prasutha Rani Markapudi & Senthilarasu Sundaram & Lingamallu Giribabu, 2023. "Semitransparent Perovskite Solar Cells for Building Integrated Photovoltaics: Recent Advances," Energies, MDPI, vol. 16(2), pages 1-25, January.
    4. Hasim Altan & Bertug Ozarisoy, 2022. "An Analysis of the Development of Modular Building Design Elements to Improve Thermal Performance of a Representative High Rise Residential Estate in the Coastline City of Famagusta, Cyprus," Sustainability, MDPI, vol. 14(7), pages 1-50, March.
    5. Paris A. Fokaides & Christiana Panteli & Andri Panayidou, 2020. "How Are the Smart Readiness Indicators Expected to Affect the Energy Performance of Buildings: First Evidence and Perspectives," Sustainability, MDPI, vol. 12(22), pages 1-12, November.
    6. Kontoleon, K.J. & Theodosiou, Th.G. & Tsikaloudaki, K.G., 2013. "The influence of concrete density and conductivity on walls’ thermal inertia parameters under a variety of masonry and insulation placements," Applied Energy, Elsevier, vol. 112(C), pages 325-337.
    7. Mazzeo, D. & Oliveti, G. & Arcuri, N., 2016. "Influence of internal and external boundary conditions on the decrement factor and time lag heat flux of building walls in steady periodic regime," Applied Energy, Elsevier, vol. 164(C), pages 509-531.
    8. Fabio Gualandri & Aleksandra Kuzior, 2023. "Home Energy Management Systems Adoption Scenarios: The Case of Italy," Energies, MDPI, vol. 16(13), pages 1-20, June.
    9. Fernando R. Mazarrón & Jaime Cid-Falceto & Ignacio Cañas, 2012. "Ground Thermal Inertia for Energy Efficient Building Design: A Case Study on Food Industry," Energies, MDPI, vol. 5(2), pages 1-16, February.
    10. Jihui Yuan, 2018. "Impact of Insulation Type and Thickness on the Dynamic Thermal Characteristics of an External Wall Structure," Sustainability, MDPI, vol. 10(8), pages 1-14, August.
    11. Fathipour, Reza & Hadidi, Amin, 2017. "Analytical solution for the study of time lag and decrement factor for building walls in climate of Iran," Energy, Elsevier, vol. 134(C), pages 167-180.
    12. Filippín, C. & Flores Larsen, S., 2009. "Analysis of energy consumption patterns in multi-family housing in a moderate cold climate," Energy Policy, Elsevier, vol. 37(9), pages 3489-3501, September.
    13. Goopyo Hong & Suk-Won Lee & Ji-Yeon Kang & Hyung-Geun Kim, 2019. "Thermal Behavior and Measures to Prevent Condensation of a Newly Developed External Wall Panel," Sustainability, MDPI, vol. 11(3), pages 1-14, February.
    14. Lazaros Aresti & Paul Christodoulides & Gregoris P. Panayiotou & Georgios Florides, 2020. "Residential Buildings’ Foundations as a Ground Heat Exchanger and Comparison among Different Types in a Moderate Climate Country," Energies, MDPI, vol. 13(23), pages 1-22, November.
    15. Michalak, Piotr, 2014. "The simple hourly method of EN ISO 13790 standard in Matlab/Simulink: A comparative study for the climatic conditions of Poland," Energy, Elsevier, vol. 75(C), pages 568-578.
    16. Ozel, Meral, 2012. "The influence of exterior surface solar absorptivity on thermal characteristics and optimum insulation thickness," Renewable Energy, Elsevier, vol. 39(1), pages 347-355.
    17. Corrado, Vincenzo & Paduos, Simona, 2016. "New equivalent parameters for thermal characterization of opaque building envelope components under dynamic conditions," Applied Energy, Elsevier, vol. 163(C), pages 313-322.
    18. Liu, Zhengguang & Guo, Zhiling & Chen, Qi & Song, Chenchen & Shang, Wenlong & Yuan, Meng & Zhang, Haoran, 2023. "A review of data-driven smart building-integrated photovoltaic systems: Challenges and objectives," Energy, Elsevier, vol. 263(PE).
    19. Long, Linshuang & Ye, Hong & Gao, Yanfeng & Zou, Ruqiang, 2014. "Performance demonstration and evaluation of the synergetic application of vanadium dioxide glazing and phase change material in passive buildings," Applied Energy, Elsevier, vol. 136(C), pages 89-97.
    20. Sun, Xiaoqin & Jovanovic, Jovana & Zhang, Yuan & Fan, Siyuan & Chu, Youhong & Mo, Yajing & Liao, Shuguang, 2019. "Use of encapsulated phase change materials in lightweight building walls for annual thermal regulation," Energy, Elsevier, vol. 180(C), pages 858-872.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:11:y:2018:i:6:p:1520-:d:151895. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.