IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v74y2017icp364-376.html
   My bibliography  Save this article

An overview of modelling techniques employed for performance simulation of low–grade heat operated adsorption cooling systems

Author

Listed:
  • Sah, Ramesh P.
  • Choudhury, Biplab
  • Das, Ranadip K.
  • Sur, Anirban

Abstract

With increasing social and economic developmental activities, high grade energy sources are depleting at faster rate and also inviting menace of environmental problems. Therefore, to reduce dependency on high grade energy sources for cooling applications and to protect environment, adsorption cooling systems are promising alternatives that are powered by low grade heat sources like solar heat, industrial/automobile waste heat etc. and also use environment friendly refrigerants. But, these systems have still low performances, large size and high cost. Therefore, in order to overcome these difficulties, many researchers are focussing on different ways to improve heat and mass transfers in the heat exchangers of the system to enhance its performance. These strategies include the use of advanced adsorbent material and advanced adsorption cycles, design improvement in heat exchangers and development of mathematical models for optimization of design/operating parameters of the cooling systems. In this paper, various mathematical models for adsorption systems are presented that include thermodynamic models, lumped parameters models; and heat and mass transfer models. These models include equations governing the heat and mass transfer in the main components of the cooling systems. The advantages of this method are that it can produce large volumes of results at no more cost and it is very cheap to perform parametric studies, for instance, to optimize equipment performance. The various numerical methods and experimental validations have been also presented and discussed.

Suggested Citation

  • Sah, Ramesh P. & Choudhury, Biplab & Das, Ranadip K. & Sur, Anirban, 2017. "An overview of modelling techniques employed for performance simulation of low–grade heat operated adsorption cooling systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 364-376.
    • Handle: RePEc:eee:rensus:v:74:y:2017:i:c:p:364-376
    DOI: 10.1016/j.rser.2017.02.062
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032117302800
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2017.02.062?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lemmini, Fatiha & Errougani, Abdelmoussehel, 2007. "Experimentation of a solar adsorption refrigerator in Morocco," Renewable Energy, Elsevier, vol. 32(15), pages 2629-2641.
    2. Muhammad Umair & Atsushi Akisawa & Yuki Ueda, 2014. "Performance Evaluation of a Solar Adsorption Refrigeration System with a Wing Type Compound Parabolic Concentrator," Energies, MDPI, vol. 7(3), pages 1-19, March.
    3. Saha, Bidyut B. & Boelman, Elisa C. & Kashiwagi, Takao, 1995. "Computational analysis of an advanced adsorption-refrigeration cycle," Energy, Elsevier, vol. 20(10), pages 983-994.
    4. Li, C.H. & Wang, R.Z. & Lu, Y.Z., 2002. "Investigation of a novel combined cycle of solar powered adsorption–ejection refrigeration system," Renewable Energy, Elsevier, vol. 26(4), pages 611-622.
    5. Yong, Li & Sumathy, K., 2002. "Review of mathematical investigation on the closed adsorption heat pump and cooling systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 6(4), pages 305-338, August.
    6. Sah, Ramesh P. & Choudhury, Biplab & Das, Ranadip K., 2015. "A review on adsorption cooling systems with silica gel and carbon as adsorbents," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 123-134.
    7. Sah, Ramesh P. & Choudhury, Biplab & Das, Ranadip K., 2016. "A review on low grade heat powered adsorption cooling systems for ice production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 109-120.
    8. Allouhi, A. & Kousksou, T. & Jamil, A. & Zeraouli, Y., 2014. "Modeling of a thermal adsorber powered by solar energy for refrigeration applications," Energy, Elsevier, vol. 75(C), pages 589-596.
    9. Li, S. & Wu, J.Y., 2009. "Theoretical research of a silica gel-water adsorption chiller in a micro combined cooling, heating and power (CCHP) system," Applied Energy, Elsevier, vol. 86(6), pages 958-967, June.
    10. Li, M. & Huang, H.B. & Wang, R.Z. & Wang, L.L. & Cai, W.D. & Yang, W.M., 2004. "Experimental study on adsorbent of activated carbon with refrigerant of methanol and ethanol for solar ice maker," Renewable Energy, Elsevier, vol. 29(15), pages 2235-2244.
    11. Zhao, Yongling & Hu, Eric & Blazewicz, Antoni, 2012. "Dynamic modelling of an activated carbon–methanol adsorption refrigeration tube with considerations of interfacial convection and transient pressure process," Applied Energy, Elsevier, vol. 95(C), pages 276-284.
    12. Zhang, L.Z. & Wang, L., 1999. "Momentum and heat transfer in the adsorbent of a waste-heat adsorption cooling system," Energy, Elsevier, vol. 24(7), pages 605-624.
    13. Khan, M.Z.I. & Saha, B.B. & Alam, K.C.A. & Akisawa, A. & Kashiwagi, T., 2007. "Study on solar/waste heat driven multi-bed adsorption chiller with mass recovery," Renewable Energy, Elsevier, vol. 32(3), pages 365-381.
    14. Anyanwu, E.E. & Ogueke, N.V., 2005. "Thermodynamic design procedure for solid adsorption solar refrigerator," Renewable Energy, Elsevier, vol. 30(1), pages 81-96.
    15. Hajji, A. & Worek, W.M., 1991. "Simulation of a regenerative, closed-cycle adsorption cooling/heating system," Energy, Elsevier, vol. 16(3), pages 643-654.
    16. Louajari, Mohamed & Mimet, Abdelaziz & Ouammi, Ahmed, 2011. "Study of the effect of finned tube adsorber on the performance of solar driven adsorption cooling machine using activated carbon-ammonia pair," Applied Energy, Elsevier, vol. 88(3), pages 690-698, March.
    17. Dieng, A. O. & Wang, R. Z., 2001. "Literature review on solar adsorption technologies for ice-making and air-conditioning purposes and recent developments in solar technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 5(4), pages 313-342, December.
    18. Dai, Y.J. & Sumathy, K., 2003. "Heat and mass transfer in the adsorbent of a solar adsorption cooling system with glass tube insulation," Energy, Elsevier, vol. 28(14), pages 1511-1527.
    19. Hassan, H.Z. & Mohamad, A.A. & Alyousef, Y. & Al-Ansary, H.A., 2015. "A review on the equations of state for the working pairs used in adsorption cooling systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 600-609.
    20. Boubakri, A, 2003. "A new conception of an adsorptive solar-powered ice maker," Renewable Energy, Elsevier, vol. 28(5), pages 831-842.
    21. Wang, S.G. & Wang, R.Z. & Li, X.R., 2005. "Research and development of consolidated adsorbent for adsorption systems," Renewable Energy, Elsevier, vol. 30(9), pages 1425-1441.
    22. Li, M. & Wang, R.Z., 2003. "Heat and mass transfer in a flat plate solar solid adsorption refrigeration ice maker," Renewable Energy, Elsevier, vol. 28(4), pages 613-622.
    23. Fan, Y. & Luo, L. & Souyri, B., 2007. "Review of solar sorption refrigeration technologies: Development and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(8), pages 1758-1775, October.
    24. Dai, Y.J. & Wang, R.Z. & Xu, Y.X., 2002. "Study of a solar powered solid adsorption–desiccant cooling system used for grain storage," Renewable Energy, Elsevier, vol. 25(3), pages 417-430.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Yuzhu & Hua, Huilian & Xu, Jinzhao & Yun, Zhonghua & Wang, Jun & Lund, Peter D., 2022. "Techno-economic cost assessment of a combined cooling heating and power system coupled to organic Rankine cycle with life cycle method," Energy, Elsevier, vol. 239(PA).
    2. Chumnanwat, Suppanat & Watanabe, Yuto & Taniguchi, Naoko & Higashi, Hidenori & Kodama, Akio & Seto, Takafumi & Otani, Yoshio & Kumita, Mikio, 2020. "Pore structure control of anodized alumina film and sorption properties of water vapor on CaCl2-aluminum composites," Energy, Elsevier, vol. 208(C).
    3. Papakokkinos, Giorgos & Castro, Jesús & López, Joan & Oliva, Assensi, 2019. "A generalized computational model for the simulation of adsorption packed bed reactors – Parametric study of five reactor geometries for cooling applications," Applied Energy, Elsevier, vol. 235(C), pages 409-427.
    4. Kim, Dong-Seon & Chang, Young-Soo & Lee, Dae-Young, 2018. "Modelling of an adsorption chiller with adsorbent-coated heat exchangers: Feasibility of a polymer-water adsorption chiller," Energy, Elsevier, vol. 164(C), pages 1044-1061.
    5. Xu, Jing & Pan, Qaunwen & Zhang, Wei & Liu, Zhiliang & Wang, Ruzhu & Ge, Tianshu, 2022. "Design and experimental study on a hybrid adsorption refrigeration system using desiccant coated heat exchangers for efficient energy utilization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    6. Feng, Changling & E, Jiaqiang & Han, Wei & Deng, Yuanwang & Zhang, Bin & Zhao, Xiaohuan & Han, Dandan, 2021. "Key technology and application analysis of zeolite adsorption for energy storage and heat-mass transfer process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    7. Mohammadzadeh Kowsari, Milad & Niazmand, Hamid & Tokarev, Mikhail Mikhailovich, 2018. "Bed configuration effects on the finned flat-tube adsorption heat exchanger performance: Numerical modeling and experimental validation," Applied Energy, Elsevier, vol. 213(C), pages 540-554.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sah, Ramesh P. & Choudhury, Biplab & Das, Ranadip K., 2016. "A review on low grade heat powered adsorption cooling systems for ice production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 109-120.
    2. Sah, Ramesh P. & Choudhury, Biplab & Das, Ranadip K., 2015. "A review on adsorption cooling systems with silica gel and carbon as adsorbents," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 123-134.
    3. Mahesh, A., 2017. "Solar collectors and adsorption materials aspects of cooling system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1300-1312.
    4. Goyal, Parash & Baredar, Prashant & Mittal, Arvind & Siddiqui, Ameenur. R., 2016. "Adsorption refrigeration technology – An overview of theory and its solar energy applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1389-1410.
    5. Fernandes, M.S. & Brites, G.J.V.N. & Costa, J.J. & Gaspar, A.R. & Costa, V.A.F., 2014. "Review and future trends of solar adsorption refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 102-123.
    6. Choudhury, Biplab & Saha, Bidyut Baran & Chatterjee, Pradip K. & Sarkar, Jyoti Prakas, 2013. "An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling," Applied Energy, Elsevier, vol. 104(C), pages 554-567.
    7. Yeo, T.H.C. & Tan, I.A.W. & Abdullah, M.O., 2012. "Development of adsorption air-conditioning technology using modified activated carbon – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3355-3363.
    8. Hassan, H.Z. & Mohamad, A.A., 2012. "A review on solar-powered closed physisorption cooling systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2516-2538.
    9. N’Tsoukpoe, Kokouvi Edem & Yamegueu, Daniel & Bassole, Justin, 2014. "Solar sorption refrigeration in Africa," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 318-335.
    10. Sharafian, Amir & Bahrami, Majid, 2015. "Critical analysis of thermodynamic cycle modeling of adsorption cooling systems for light-duty vehicle air conditioning applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 857-869.
    11. Cabeza, Luisa F. & Solé, Aran & Barreneche, Camila, 2017. "Review on sorption materials and technologies for heat pumps and thermal energy storage," Renewable Energy, Elsevier, vol. 110(C), pages 3-39.
    12. Sharafian, Amir & Bahrami, Majid, 2014. "Assessment of adsorber bed designs in waste-heat driven adsorption cooling systems for vehicle air conditioning and refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 440-451.
    13. Fan, Y. & Luo, L. & Souyri, B., 2007. "Review of solar sorption refrigeration technologies: Development and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(8), pages 1758-1775, October.
    14. Hassan Zohair Hassan, 2014. "Performance Evaluation of a Continuous Operation Adsorption Chiller Powered by Solar Energy Using Silica Gel and Water as the Working Pair," Energies, MDPI, vol. 7(10), pages 1-19, October.
    15. Habib, Khairul & Choudhury, Biplab & Chatterjee, Pradip Kumar & Saha, Bidyut Baran, 2013. "Study on a solar heat driven dual-mode adsorption chiller," Energy, Elsevier, vol. 63(C), pages 133-141.
    16. Jebasingh, V.K. & Herbert, G.M. Joselin, 2016. "A review of solar parabolic trough collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1085-1091.
    17. Pesaran, Alireza & Lee, Hoseong & Hwang, Yunho & Radermacher, Reinhard & Chun, Ho-Hwan, 2016. "Review article: Numerical simulation of adsorption heat pumps," Energy, Elsevier, vol. 100(C), pages 310-320.
    18. Wang, L.W. & Wang, R.Z. & Oliveira, R.G., 2009. "A review on adsorption working pairs for refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(3), pages 518-534, April.
    19. Nagel, Thomas & Beckert, Steffen & Lehmann, Christoph & Gläser, Roger & Kolditz, Olaf, 2016. "Multi-physical continuum models of thermochemical heat storage and transformation in porous media and powder beds—A review," Applied Energy, Elsevier, vol. 178(C), pages 323-345.
    20. Hassan, H.Z. & Mohamad, A.A. & Alyousef, Y. & Al-Ansary, H.A., 2015. "A review on the equations of state for the working pairs used in adsorption cooling systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 600-609.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:74:y:2017:i:c:p:364-376. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.