IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v127y2020ics1364032120301763.html
   My bibliography  Save this article

Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19

Author

Listed:
  • Klemeš, Jiří Jaromír
  • Fan, Yee Van
  • Tan, Raymond R.
  • Jiang, Peng

Abstract

The COVID-19 pandemic has had growing environmental consequences related to plastic use and follow-up waste, but more urgent health issues have far overshadowed the potential impacts. This paper gives a prospective outlook on how the disruption caused by COVID-19 can act as a catalyst for short-term and long-term changes in plastic waste management practices throughout the world. The impact of the pandemic and epidemic following through the life cycles of various plastic products, particularly those needed for personal protection and healthcare, is assessed. The energy and environmental footprints of these product systems have increased rapidly in response to the surge in the number of COVID-19 cases worldwide, while critical hazardous waste management issues are emerging due to the need to ensure destruction of residual pathogens in household and medical waste. The concept of Plastic Waste Footprint (PWF) is proposed to capture the environmental footprint of a plastic product throughout its entire life cycle. Emerging challenges in waste management during and after the pandemic are discussed from the perspective of novel research and environmental policies. The sudden shift in waste composition and quantity highlights the need for a dynamically reponsive waste management system. Six future research directions are suggested to mitigate the potential impacts of the pandemic on waste management systems.

Suggested Citation

  • Klemeš, Jiří Jaromír & Fan, Yee Van & Tan, Raymond R. & Jiang, Peng, 2020. "Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19," Renewable and Sustainable Energy Reviews, Elsevier, vol. 127(C).
    • Handle: RePEc:eee:rensus:v:127:y:2020:i:c:s1364032120301763
    DOI: 10.1016/j.rser.2020.109883
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032120301763
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2020.109883?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xu, Z.Y. & Wang, R.Z. & Yang, Chun, 2019. "Perspectives for low-temperature waste heat recovery," Energy, Elsevier, vol. 176(C), pages 1037-1043.
    2. Makarichi, Luke & Jutidamrongphan, Warangkana & Techato, Kua-anan, 2018. "The evolution of waste-to-energy incineration: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 812-821.
    3. Jiajia Zheng & Sangwon Suh, 2019. "Strategies to reduce the global carbon footprint of plastics," Nature Climate Change, Nature, vol. 9(5), pages 374-378, May.
    4. Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Walmsley, Timothy G. & Jia, Xuexiu, 2018. "New directions in the implementation of Pinch Methodology (PM)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 439-468.
    5. Liu, Hu-Chen & You, Jian-Xin & Lu, Chao & Chen, Yi-Zeng, 2015. "Evaluating health-care waste treatment technologies using a hybrid multi-criteria decision making model," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 932-942.
    6. Jiajia Zheng & Sangwon Suh, 2019. "Publisher Correction: Strategies to reduce the global carbon footprint of plastics," Nature Climate Change, Nature, vol. 9(7), pages 567-567, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vlachokostas, Ch. & Michailidou, A.V. & Achillas, Ch., 2021. "Multi-Criteria Decision Analysis towards promoting Waste-to-Energy Management Strategies: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    2. Konrad, Kai A. & Lommerud, Kjell Erik, 2021. "Effective climate policy needs non-combustion uses for hydrocarbons," Energy Policy, Elsevier, vol. 157(C).
    3. N. O. Kapustin & D. A. Grushevenko, 2023. "Assessment of Long-Term Prospects for Demand in the Plastics Market in the Face of Industry Transformation," Studies on Russian Economic Development, Springer, vol. 34(2), pages 243-253, April.
    4. Gilbert Moyen Massa & Vasiliki-Maria Archodoulaki, 2024. "An Imported Environmental Crisis: Plastic Mismanagement in Africa," Sustainability, MDPI, vol. 16(2), pages 1-18, January.
    5. David Duindam, 2022. "Transitioning to Sustainable Healthcare: Decarbonising Healthcare Clinics, a Literature Review," Challenges, MDPI, vol. 13(2), pages 1-20, December.
    6. Chrysanthos Maraveas, 2020. "Environmental Sustainability of Plastic in Agriculture," Agriculture, MDPI, vol. 10(8), pages 1-15, July.
    7. Erfan Oliaei & Peter Olsén & Tom Lindström & Lars A. Berglund, 2022. "Highly reinforced and degradable lignocellulose biocomposites by polymerization of new polyester oligomers," Nature Communications, Nature, vol. 13(1), pages 1-12, December.
    8. Siddharthan Selvaraj & Somasundaram Prasadh & Shivkanya Fuloria & Vetriselvan Subramaniyan & Mahendran Sekar & Abdelmoty M. Ahmed & Belgacem Bouallegue & Darnal Hari Kumar & Vipin Kumar Sharma & Moham, 2022. "COVID-19 Biomedical Plastics Wastes—Challenges and Strategies for Curbing the Environmental Disaster," Sustainability, MDPI, vol. 14(11), pages 1-15, May.
    9. Livia Cabernard & Stephan Pfister & Christopher Oberschelp & Stefanie Hellweg, 2022. "Growing environmental footprint of plastics driven by coal combustion," Nature Sustainability, Nature, vol. 5(2), pages 139-148, February.
    10. Halayit Abrha & Jonnathan Cabrera & Yexin Dai & Muhammad Irfan & Abrham Toma & Shipu Jiao & Xianhua Liu, 2022. "Bio-Based Plastics Production, Impact and End of Life: A Literature Review and Content Analysis," Sustainability, MDPI, vol. 14(8), pages 1-20, April.
    11. Quan-Hoang Vuong & Manh-Tung Ho & Hong-Kong To Nguyen & Minh-Hoang Nguyen, 2019. "The trilemma of sustainable industrial growth: evidence from a piloting OECD’s Green city," Palgrave Communications, Palgrave Macmillan, vol. 5(1), pages 1-14, December.
    12. Bauer, Fredric & Fontenit, Germain, 2021. "Plastic dinosaurs – Digging deep into the accelerating carbon lock-in of plastics," Energy Policy, Elsevier, vol. 156(C).
    13. Daniel Holzer & Claudia Mair-Bauernfeind & Michael Kriechbaum & Romana Rauter & Tobias Stern, 2023. "Different but the Same? Comparing Drivers and Barriers for Circular Economy Innovation Systems in Wood- and Plastic-Based Industries," Circular Economy and Sustainability,, Springer.
    14. Aditya Chidepatil & Prabhleen Bindra & Devyani Kulkarni & Mustafa Qazi & Meghana Kshirsagar & Krishnaswamy Sankaran, 2020. "From Trash to Cash: How Blockchain and Multi-Sensor-Driven Artificial Intelligence Can Transform Circular Economy of Plastic Waste?," Administrative Sciences, MDPI, vol. 10(2), pages 1-16, April.
    15. Anna Tenhunen-Lunkka & Tom Rommens & Ive Vanderreydt & Lars Mortensen, 2023. "Greenhouse Gas Emission Reduction Potential of European Union’s Circularity Related Targets for Plastics," Circular Economy and Sustainability,, Springer.
    16. Hunt, Julian David & Nascimento, Andreas & Nascimento, Nazem & Vieira, Lara Werncke & Romero, Oldrich Joel, 2022. "Possible pathways for oil and gas companies in a sustainable future: From the perspective of a hydrogen economy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    17. Ciprian Cimpan & Eivind Lekve Bjelle & Anders Hammer Strømman, 2021. "Plastic packaging flows in Europe: A hybrid input‐output approach," Journal of Industrial Ecology, Yale University, vol. 25(6), pages 1572-1587, December.
    18. Pavel A. Kots & Tianjun Xie & Brandon C. Vance & Caitlin M. Quinn & Matheus Dorneles Mello & J. Anibal Boscoboinik & Cong Wang & Pawan Kumar & Eric A. Stach & Nebojsa S. Marinkovic & Lu Ma & Steven N., 2022. "Electronic modulation of metal-support interactions improves polypropylene hydrogenolysis over ruthenium catalysts," Nature Communications, Nature, vol. 13(1), pages 1-11, December.
    19. Emma A. R. Zuiderveen & Koen J. J. Kuipers & Carla Caldeira & Steef V. Hanssen & Mitchell K. Hulst & Melinda M. J. Jonge & Anestis Vlysidis & Rosalie Zelm & Serenella Sala & Mark A. J. Huijbregts, 2023. "The potential of emerging bio-based products to reduce environmental impacts," Nature Communications, Nature, vol. 14(1), pages 1-7, December.
    20. Zvanaka S. Mazhandu & Edison Muzenda & Tirivaviri A. Mamvura & Mohamed Belaid & Trust Nhubu, 2020. "Integrated and Consolidated Review of Plastic Waste Management and Bio-Based Biodegradable Plastics: Challenges and Opportunities," Sustainability, MDPI, vol. 12(20), pages 1-57, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:127:y:2020:i:c:s1364032120301763. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.