IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v112y2019icp183-194.html
   My bibliography  Save this article

Enhancing the performance of automotive radiators using nanofluids

Author

Listed:
  • Said, Zafar
  • El Haj Assad, M.
  • Hachicha, Ahmed Amine
  • Bellos, Evangelos
  • Abdelkareem, Mohammad Ali
  • Alazaizeh, Duha Zeyad
  • Yousef, Bashria A.A.

Abstract

Advanced heat removal technologies are critical for high-performance automotive engines. The conventional fluids being used today are based on a mixture of distilled water (DW) and ethylene glycol (EG), which widens the operational temperature range but at the same time limits the heat removal. Therefore, the use of nanofluids for improving heat transfer performance has soared over the past few years. The problem is that most of the reports highlight the short-term heat transfer results which may not be true over time. In this paper, a suggested best practice for analyzing the usage of nanofluids in heat transfer applications is presented, specifically for an actual car radiator. This work investigates the use of aluminum oxide (Al2O3) and titanium dioxide (TiO2) nanoparticles dispersed in DW and EG at 50:50 volumetric proportions. The choice of these oxide-based nanofluids is motivated by their anti-corrosive properties that are usually not analyzed or discussed in most of the articles. Furthermore, the emphasis is given on the presentation of a comprehensive characterization of the nanofluids including thermophysical properties (size, density, viscosity, thermal conductivity, corrosive behavior) and long-term stability (zeta potential) which are essential for an end-user to have. The results showed a maximum enhancement of the thermal performance by 24.21% using Al2O3 at a volume fraction of 0.3%. Friction factor and performance evaluation criterion (PEC) for the radiator experiments are calculated in order to determine the penalty in the pressure drop and to evaluate it properly. Finally, it is found that the values of PEC lie in the range of 1.03–1.31 which indicates significant flow enhancement.

Suggested Citation

  • Said, Zafar & El Haj Assad, M. & Hachicha, Ahmed Amine & Bellos, Evangelos & Abdelkareem, Mohammad Ali & Alazaizeh, Duha Zeyad & Yousef, Bashria A.A., 2019. "Enhancing the performance of automotive radiators using nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 183-194.
  • Handle: RePEc:eee:rensus:v:112:y:2019:i:c:p:183-194
    DOI: 10.1016/j.rser.2019.05.052
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032119303752
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.rser.2019.05.052?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mukkamala, Yagnavalkya, 2017. "Contemporary trends in thermo-hydraulic testing and modeling of automotive radiators deploying nano-coolants and aerodynamically efficient air-side fins," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 1208-1229.
    2. Khanafer, Khalil & Vafai, Kambiz, 2018. "A review on the applications of nanofluids in solar energy field," Renewable Energy, Elsevier, vol. 123(C), pages 398-406.
    3. Zhao, Ningbo & Li, Shuying & Yang, Jialong, 2016. "A review on nanofluids: Data-driven modeling of thermalphysical properties and the application in automotive radiator," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 596-616.
    4. Gupta, Munish & Singh, Vinay & Kumar, Rajesh & Said, Z., 2017. "A review on thermophysical properties of nanofluids and heat transfer applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 638-670.
    5. Raja, M. & Vijayan, R. & Dineshkumar, P. & Venkatesan, M., 2016. "Review on nanofluids characterization, heat transfer characteristics and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 163-173.
    6. Bigdeli, Masoud Bozorg & Fasano, Matteo & Cardellini, Annalisa & Chiavazzo, Eliodoro & Asinari, Pietro, 2016. "A review on the heat and mass transfer phenomena in nanofluid coolants with special focus on automotive applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1615-1633.
    7. Alam, Tabish & Kim, Man-Hoe, 2018. "A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 813-839.
    8. Mannekote, Jagadeesh K. & Kailas, Satish V. & Venkatesh, K. & Kathyayini, N., 2018. "Environmentally friendly functional fluids from renewable and sustainable sources-A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 1787-1801.
    9. Che Sidik, Nor Azwadi & Witri Mohd Yazid, Muhammad Noor Afiq & Mamat, Rizalman, 2017. "Recent advancement of nanofluids in engine cooling system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 137-144.
    10. Said, Zafar & Arora, Sahil & Bellos, Evangelos, 2018. "A review on performance and environmental effects of conventional and nanofluid-based thermal photovoltaics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 94(C), pages 302-316.
    11. Sajid, Muhammad Usman & Ali, Hafiz Muhammad, 2019. "Recent advances in application of nanofluids in heat transfer devices: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 556-592.
    12. Dhinesh Kumar, D. & Valan Arasu, A., 2018. "A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 1669-1689.
    13. Ambreen, Tehmina & Kim, Man-Hoe, 2018. "Heat transfer and pressure drop correlations of nanofluids: A state of art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 564-583.
    14. Tawfik, Mohamed M., 2017. "Experimental studies of nanofluid thermal conductivity enhancement and applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1239-1253.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Choudhary, Suraj & Sachdeva, Anish & Kumar, Pramod, 2020. "Influence of stable zinc oxide nanofluid on thermal characteristics of flat plate solar collector," Renewable Energy, Elsevier, vol. 152(C), pages 1160-1170.
    2. Liu, Changhui & Qiao, Yu & Du, Peixing & Zhang, Jiahao & Zhao, Jiateng & Liu, Chenzhen & Huo, Yutao & Qi, Cong & Rao, Zhonghao & Yan, Yuying, 2021. "Recent advances of nanofluids in micro/nano scale energy transportation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    3. Shah, Tayyab Raza & Ali, Hafiz Muhammad & Zhou, Chao & Babar, Hamza & Janjua, Muhammad Mansoor & Doranehgard, Mohammad Hossein & Hussain, Abid & Sajjad, Uzair & Wang, Chi-Chuan & Sultan, Muhamad, 2022. "Potential evaluation of water-based ferric oxide (Fe2O3-water) nanocoolant: An experimental study," Energy, Elsevier, vol. 246(C).
    4. Huang, Pingnan & Pan, Minqiang, 2021. "Secondary heat transfer enhancement design of variable cross-section microchannels based on entransy analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    5. Arslan Saleem & Man-Hoe Kim, 2022. "Airside Thermal Performance of Louvered Fin Flat-Tube Heat Exchangers with Different Redirection Louvers," Energies, MDPI, vol. 15(16), pages 1-21, August.
    6. Arora, Neeti & Gupta, Munish, 2020. "An updated review on application of nanofluids in flat tubes radiators for improving cooling performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    7. Ghodbane, Mokhtar & Said, Zafar & Hachicha, Ahmed Amine & Boumeddane, Boussad, 2020. "Performance assessment of linear Fresnel solar reflector using MWCNTs/DW nanofluids," Renewable Energy, Elsevier, vol. 151(C), pages 43-56.
    8. Olabi, A.G. & Abdelkareem, Mohammad Ali & Wilberforce, Tabbi & Sayed, Enas Taha, 2021. "Application of graphene in energy storage device – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    9. Hachicha, Ahmed Amine & Said, Zafar & Rahman, S.M.A. & Al-Sarairah, Eman, 2020. "On the thermal and thermodynamic analysis of parabolic trough collector technology using industrial-grade MWCNT based nanofluid," Renewable Energy, Elsevier, vol. 161(C), pages 1303-1317.
    10. Shi, Lei & Zhang, Shuai & Arshad, Adeel & Hu, Yanwei & He, Yurong & Yan, Yuying, 2021. "Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    11. Mukherjee, Sayantan & Halder, Tamoghna & Ranjan, Shourya & Bose, Koustav & Mishra, Purna Chandra & Chakrabarty, Shanta, 2021. "Effects of SiO2 nanoparticles addition on performance of commercial engine coolant: Experimental investigation and empirical correlation," Energy, Elsevier, vol. 231(C).
    12. Coccia, Gianluca & Tomassetti, Sebastiano & Di Nicola, Giovanni, 2021. "Thermal conductivity of nanofluids: A review of the existing correlations and a scaled semi-empirical equation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    13. Said, Zafar & Ghodbane, Mokhtar & Sundar, L. Syam & Tiwari, Arun Kumar & Sheikholeslami, Mohsen & Boumeddane, Boussad, 2021. "Heat transfer, entropy generation, economic and environmental analyses of linear fresnel reflector using novel rGO-Co3O4 hybrid nanofluids," Renewable Energy, Elsevier, vol. 165(P1), pages 420-437.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xu, Yanyan & Xue, Yanqin & Qi, Hong & Cai, Weihua, 2021. "An updated review on working fluids, operation mechanisms, and applications of pulsating heat pipes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    2. Elsheikh, A.H. & Sharshir, S.W. & Mostafa, Mohamed E. & Essa, F.A. & Ahmed Ali, Mohamed Kamal, 2018. "Applications of nanofluids in solar energy: A review of recent advances," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3483-3502.
    3. Ambreen, Tehmina & Kim, Man-Hoe, 2018. "Heat transfer and pressure drop correlations of nanofluids: A state of art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 564-583.
    4. Ma, Ting & Guo, Zhixiong & Lin, Mei & Wang, Qiuwang, 2021. "Recent trends on nanofluid heat transfer machine learning research applied to renewable energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    5. Arora, Neeti & Gupta, Munish, 2020. "An updated review on application of nanofluids in flat tubes radiators for improving cooling performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    6. Wang, Xianling & Luo, Liang & Xiang, Jinwei & Zheng, Senlin & Shittu, Samson & Wang, Zhangyuan & Zhao, Xudong, 2021. "A comprehensive review on the application of nanofluid in heat pipe based on the machine learning: Theory, application and prediction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    7. Shah, Tayyab Raza & Ali, Hafiz Muhammad & Zhou, Chao & Babar, Hamza & Janjua, Muhammad Mansoor & Doranehgard, Mohammad Hossein & Hussain, Abid & Sajjad, Uzair & Wang, Chi-Chuan & Sultan, Muhamad, 2022. "Potential evaluation of water-based ferric oxide (Fe2O3-water) nanocoolant: An experimental study," Energy, Elsevier, vol. 246(C).
    8. Hemmati-Sarapardeh, Abdolhossein & Varamesh, Amir & Husein, Maen M. & Karan, Kunal, 2018. "On the evaluation of the viscosity of nanofluid systems: Modeling and data assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 313-329.
    9. Javed, Samina & Ali, Hafiz Muhammad & Babar, Hamza & Khan, Muhammad Sajid & Janjua, Muhammad Mansoor & Bashir, Muhammad Anser, 2020. "Internal convective heat transfer of nanofluids in different flow regimes: A comprehensive review," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    10. Ambreen, Tehmina & Kim, Man-Hoe, 2020. "Influence of particle size on the effective thermal conductivity of nanofluids: A critical review," Applied Energy, Elsevier, vol. 264(C).
    11. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    12. Atul Bhattad & Vinay Atgur & Boggarapu Nageswar Rao & N. R. Banapurmath & T. M. Yunus Khan & Chandramouli Vadlamudi & Sanjay Krishnappa & A. M. Sajjan & R. Prasanna Shankara & N. H. Ayachit, 2023. "Review on Mono and Hybrid Nanofluids: Preparation, Properties, Investigation, and Applications in IC Engines and Heat Transfer," Energies, MDPI, vol. 16(7), pages 1-40, March.
    13. Cui, Yuanlong & Zhu, Jie & Zoras, Stamatis & Zhang, Jizhe, 2021. "Comprehensive review of the recent advances in PV/T system with loop-pipe configuration and nanofluid," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    14. Shi, Lei & Zhang, Shuai & Arshad, Adeel & Hu, Yanwei & He, Yurong & Yan, Yuying, 2021. "Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    15. Selimefendigil, Fatih & Öztop, Hakan F., 2021. "Thermoelectric generation in bifurcating channels and efficient modeling by using hybrid CFD and artificial neural networks," Renewable Energy, Elsevier, vol. 172(C), pages 582-598.
    16. Badreddine Ayadi & Fatih Selimefendigil & Faisal Alresheedi & Lioua Kolsi & Walid Aich & Lotfi Ben Said, 2021. "Jet Impingement Cooling of a Rotating Hot Circular Cylinder with Hybrid Nanofluid under Multiple Magnetic Field Effects," Mathematics, MDPI, vol. 9(21), pages 1-17, October.
    17. Fatih Selimefendigil & Mohamed Omri & Walid Aich & Hatem Besbes & Nidhal Ben Khedher & Badr M. Alshammari & Lioua Kolsi, 2023. "Numerical Study of Thermo-Electric Conversion for TEG Mounted Wavy Walled Triangular Vented Cavity Considering Nanofluid with Different-Shaped Nanoparticles," Mathematics, MDPI, vol. 11(2), pages 1-16, January.
    18. Gürdal, Mehmet & Arslan, Kamil & Gedik, Engin & Minea, Alina Adriana, 2022. "Effects of using nanofluid, applying a magnetic field, and placing turbulators in channels on the convective heat transfer: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    19. Bhalla, Vishal & Tyagi, Himanshu, 2018. "Parameters influencing the performance of nanoparticles-laden fluid-based solar thermal collectors: A review on optical properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 12-42.
    20. Hachicha, Ahmed Amine & Yousef, Bashria A.A. & Said, Zafar & Rodríguez, Ivette, 2019. "A review study on the modeling of high-temperature solar thermal collector systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 280-298.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:112:y:2019:i:c:p:183-194. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.