IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v34y2009i7p1863-1870.html
   My bibliography  Save this article

Thermodynamic model for exergetic performance of a tubular SOFC module

Author

Listed:
  • Akkaya, Ali Volkan
  • Sahin, Bahri
  • Erdem, Hasan Huseyin

Abstract

A tubular solid oxide fuel cell (TSOFC) module fed by methane is modelled and analyzed thermodynamically from the exergy point of view in this paper. The model of TSOFC module consists of mixer, pre-reformer, internal reforming fuel cell group, afterburner and internal pre-heater components. The model of the components forming module is given based on mass, energy and exergy balance equations. The developed thermodynamic model is simulated, and the obtained performance characteristics are compared and validated with the experimental data taken from the literature concerning TSOFC module. For exergetic performance analysis, the effects of operating variables such as current density, pressure, and fuel utilization factor on exergetic performances (module exergy efficiency, module exergetic performance coefficient, module exergy output and total exergy destruction rate, and components' exergy efficiencies, exergy destruction rates) are investigated. From the analysis, it is determined that the biggest exergy loss stems from exhaust gasses. Other important sources of exergy destruction involve fuel cell group and afterburner. Consequently, the developed thermodynamic model is expected to provide not only a convenient tool to determine the module exergetic performances and component irreversibility but also an appropriate basis to design complex hybrid power generation plants.

Suggested Citation

  • Akkaya, Ali Volkan & Sahin, Bahri & Erdem, Hasan Huseyin, 2009. "Thermodynamic model for exergetic performance of a tubular SOFC module," Renewable Energy, Elsevier, vol. 34(7), pages 1863-1870.
    • Handle: RePEc:eee:renene:v:34:y:2009:i:7:p:1863-1870
    DOI: 10.1016/j.renene.2008.11.017
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148108004345
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2008.11.017?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ust, Yasin & Sahin, Bahri & Sogut, Oguz Salim, 2005. "Performance analysis and optimization of an irreversible dual-cycle based on an ecological coefficient of performance criterion," Applied Energy, Elsevier, vol. 82(1), pages 23-39, September.
    2. Ust, Yasin & Sahin, Bahri & Kodal, Ali & Akcay, Ismail Hakki, 2006. "Ecological coefficient of performance analysis and optimization of an irreversible regenerative-Brayton heat engine," Applied Energy, Elsevier, vol. 83(6), pages 558-572, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Park, Joonguen & Bae, Joongmyeon & Kim, Jae-Yuk, 2012. "A numerical study on anode thickness and channel diameter of anode-supported flat-tube solid oxide fuel cells," Renewable Energy, Elsevier, vol. 42(C), pages 180-185.
    2. Barelli, L. & Ottaviano, A., 2014. "Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions," Energy, Elsevier, vol. 71(C), pages 118-129.
    3. Chitsaz, Ata & Sadeghi, Mohsen & Sadeghi, Maesoumeh & Ghanbarloo, Elham, 2018. "Exergoenvironmental comparison of internal reforming against external reforming in a cogeneration system based on solid oxide fuel cell using an evolutionary algorithm," Energy, Elsevier, vol. 144(C), pages 420-431.
    4. Park, Joonguen & Kang, Juhyun & Bae, Joongmyeon, 2013. "Computational analysis of operating temperature, hydrogen flow rate and anode thickness in anode-supported flat-tube solid oxide fuel cells," Renewable Energy, Elsevier, vol. 54(C), pages 63-69.
    5. Fallah, M. & Mahmoudi, S.M.S. & Yari, M., 2017. "Advanced exergy analysis for an anode gas recirculation solid oxide fuel cell," Energy, Elsevier, vol. 141(C), pages 1097-1112.
    6. Farnak, M. & Esfahani, J.A. & Bozorgmehri, S., 2020. "An experimental design of the solid oxide fuel cell performance by using partially oxidation reforming of natural gas," Renewable Energy, Elsevier, vol. 147(P1), pages 155-163.
    7. Denver F. Cheddie, 2010. "Integration of A Solid Oxide Fuel Cell into A 10 MW Gas Turbine Power Plant," Energies, MDPI, vol. 3(4), pages 1-16, April.
    8. Hou, Qinlong & Zhao, Hongbin & Yang, Xiaoyu, 2018. "Thermodynamic performance study of the integrated MR-SOFC-CCHP system," Energy, Elsevier, vol. 150(C), pages 434-450.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ahmadi, Mohammad H. & Amin Nabakhteh, Mohammad & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah & Bidi, Mokhtar, 2017. "Investigation and optimization of performance of nano-scale Stirling refrigerator using working fluid as Maxwell–Boltzmann gases," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 483(C), pages 337-350.
    2. Açıkkalp, Emin & Caner, Necmettin, 2015. "Determining performance of an irreversible nano scale dual cycle operating with Maxwell–Boltzmann gas," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 424(C), pages 342-349.
    3. Ngouateu Wouagfack, Paiguy Armand & Tchinda, Réné, 2013. "Finite-time thermodynamics optimization of absorption refrigeration systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 524-536.
    4. Açıkkalp, Emin, 2015. "Exergetic sustainability evaluation of irreversible Carnot refrigerator," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 436(C), pages 311-320.
    5. Ahmadi, Mohammad H. & Ahmadi, Mohammad Ali & Sadatsakkak, Seyed Abbas, 2015. "Thermodynamic analysis and performance optimization of irreversible Carnot refrigerator by using multi-objective evolutionary algorithms (MOEAs)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1055-1070.
    6. Açıkkalp, Emin & Caner, Necmettin, 2015. "Determining of the optimum performance of a nano scale irreversible Dual cycle with quantum gases as working fluid by using different methods," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 433(C), pages 247-258.
    7. Wu, Heng & Ge, Yanlin & Chen, Lingen & Feng, Huijun, 2021. "Power, efficiency, ecological function and ecological coefficient of performance optimizations of irreversible Diesel cycle based on finite piston speed," Energy, Elsevier, vol. 216(C).
    8. Chen, Lingen & Zhang, Wanli & Sun, Fengrui, 2007. "Power, efficiency, entropy-generation rate and ecological optimization for a class of generalized irreversible universal heat-engine cycles," Applied Energy, Elsevier, vol. 84(5), pages 512-525, May.
    9. Ahmadi, Mohammad Hossein & Ahmadi, Mohammad Ali, 2016. "Multi objective optimization of performance of three-heat-source irreversible refrigerators based algorithm NSGAII," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 784-794.
    10. Ust, Yasin & Sahin, Bahri & Kodal, Ali & Akcay, Ismail Hakki, 2006. "Ecological coefficient of performance analysis and optimization of an irreversible regenerative-Brayton heat engine," Applied Energy, Elsevier, vol. 83(6), pages 558-572, June.
    11. Chandramouli, R. & Srinivasa Rao, M.S.S. & Ramji, K., 2015. "Energy and exergy based thermodynamic analysis of reheat and regenerative Braysson cycle," Energy, Elsevier, vol. 90(P2), pages 1848-1858.
    12. Long, Rui & Li, Baode & Liu, Zhichun & Liu, Wei, 2016. "Ecological analysis of a thermally regenerative electrochemical cycle," Energy, Elsevier, vol. 107(C), pages 95-102.
    13. Peng, Wanli & Gonzalez-Ayala, Julian & Su, Guozhen & Chen, Jincan & Hernández, Antonio Calvo, 2021. "Solar-driven sodium thermal electrochemical converter coupled to a Brayton heat engine: Parametric optimization," Renewable Energy, Elsevier, vol. 164(C), pages 260-271.
    14. Cui, Yunfei & Geng, Zhiqiang & Zhu, Qunxiong & Han, Yongming, 2017. "Review: Multi-objective optimization methods and application in energy saving," Energy, Elsevier, vol. 125(C), pages 681-704.
    15. Ge, Yanlin & Wu, Heng & Chen, Lingen & Feng, Huijun & Xie, Zhihui, 2023. "Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle," Energy, Elsevier, vol. 270(C).
    16. Gonca, Guven, 2017. "Exergetic and ecological performance analyses of a gas turbine system with two intercoolers and two re-heaters," Energy, Elsevier, vol. 124(C), pages 579-588.
    17. Ust, Yasin & Arslan, Feyyaz & Ozsari, Ibrahim & Cakir, Mehmet, 2015. "Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria," Energy, Elsevier, vol. 90(P1), pages 552-559.
    18. Ust, Yasin & Sahin, Bahri & Kodal, Ali, 2007. "Optimization of a dual cycle cogeneration system based on a new exergetic performance criterion," Applied Energy, Elsevier, vol. 84(11), pages 1079-1091, November.
    19. Dongxu Li & Siwei Li & Zheshu Ma & Bing Xu & Zhanghao Lu & Yanju Li & Meng Zheng, 2021. "Ecological Performance Optimization of a High Temperature Proton Exchange Membrane Fuel Cell," Mathematics, MDPI, vol. 9(12), pages 1-15, June.
    20. Shahriyar Abedinnezhad & Mohammad Hossein Ahmadi & Seyed Mohsen Pourkiaei & Fathollah Pourfayaz & Amir Mosavi & Michel Feidt & Shahaboddin Shamshirband, 2019. "Thermodynamic Assessment and Multi-Objective Optimization of Performance of Irreversible Dual-Miller Cycle," Energies, MDPI, vol. 12(20), pages 1-25, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:34:y:2009:i:7:p:1863-1870. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.