IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v216y2021ics0360544220323422.html
   My bibliography  Save this article

Power, efficiency, ecological function and ecological coefficient of performance optimizations of irreversible Diesel cycle based on finite piston speed

Author

Listed:
  • Wu, Heng
  • Ge, Yanlin
  • Chen, Lingen
  • Feng, Huijun

Abstract

By connecting the finite time thermodynamics and the finite speed thermodynamics, an irreversible reciprocating Diesel cycle model is established with considering the irreversibilities caused by finite piston speed, heat transfer, friction, and internal irreversible loss. Through numerical calculations, the relationships among net power output (P), thermal efficiency (η), ecological function (E), ecological coefficient of performance (ECOP) and compression ratio (γ), piston speed and piston speed ratio are analyzed. As it is shown in the results, the relation curves of P−γ, η−γ, E−γ, ECOP−γcharacteristics of the cycle are parabolic ones, and those of P−ηand E−ηcharacteristics of the cycle are loop-shaped ones. When piston speed ratio is a constant, the maximum net power output increases, the maximum ecological function first increases and then decreases, the maximum thermal efficiency and the maximum ecological coefficient of performance both decrease with the increase of piston speed. When piston speed is a constant, the maximum net power output and the maximum ecological function both first increase and then decrease, and the maximum thermal efficiency and maximum ecological coefficient of performance both decrease with the increase of piston speed ratio.

Suggested Citation

  • Wu, Heng & Ge, Yanlin & Chen, Lingen & Feng, Huijun, 2021. "Power, efficiency, ecological function and ecological coefficient of performance optimizations of irreversible Diesel cycle based on finite piston speed," Energy, Elsevier, vol. 216(C).
  • Handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323422
    DOI: 10.1016/j.energy.2020.119235
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220323422
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2020.119235?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ust, Yasin & Sahin, Bahri & Sogut, Oguz Salim, 2005. "Performance analysis and optimization of an irreversible dual-cycle based on an ecological coefficient of performance criterion," Applied Energy, Elsevier, vol. 82(1), pages 23-39, September.
    2. Rai, Ranjeet Kumar & Sahoo, Rashmi Rekha, 2019. "Effective power and effective power density analysis for water in diesel emulsion as fuel in diesel engine performance," Energy, Elsevier, vol. 180(C), pages 893-902.
    3. Ahmadi, Mohammad Hossein & Ahmadi, Mohammad Ali, 2016. "Multi objective optimization of performance of three-heat-source irreversible refrigerators based algorithm NSGAII," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 784-794.
    4. Chen, Lingen & Zeng, Fanming & Sun, Fengrui & Wu, Chih, 1996. "Heat-transfer effects on net work and/or power as functions of efficiency for air-standard diesel cycles," Energy, Elsevier, vol. 21(12), pages 1201-1205.
    5. Bejan, Adrian, 2018. "Thermodynamics today," Energy, Elsevier, vol. 160(C), pages 1208-1219.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Lingen & Xia, Shaojun, 2022. "Maximizing power of irreversible multistage chemical engine with linear mass transfer law using HJB theory," Energy, Elsevier, vol. 261(PB).
    2. Jin, Qinglong & Xia, Shaojun & Chen, Lingen, 2023. "A modified recompression S–CO2 Brayton cycle and its thermodynamic optimization," Energy, Elsevier, vol. 263(PE).
    3. Shuangshuang Shi & Yanlin Ge & Lingen Chen & Huijun Feng, 2021. "Performance Optimizations with Single-, Bi-, Tri-, and Quadru-Objective for Irreversible Atkinson Cycle with Nonlinear Variation of Working Fluid’s Specific Heat," Energies, MDPI, vol. 14(14), pages 1-23, July.
    4. Ge, Yanlin & Wu, Heng & Chen, Lingen & Feng, Huijun & Xie, Zhihui, 2023. "Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle," Energy, Elsevier, vol. 270(C).
    5. Chen, Lingen & Xia, Shaojun, 2022. "Maximizing power output of endoreversible non-isothermal chemical engine via linear irreversible thermodynamics," Energy, Elsevier, vol. 255(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ahmadi, Mohammad H. & Amin Nabakhteh, Mohammad & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah & Bidi, Mokhtar, 2017. "Investigation and optimization of performance of nano-scale Stirling refrigerator using working fluid as Maxwell–Boltzmann gases," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 483(C), pages 337-350.
    2. Shahriyar Abedinnezhad & Mohammad Hossein Ahmadi & Seyed Mohsen Pourkiaei & Fathollah Pourfayaz & Amir Mosavi & Michel Feidt & Shahaboddin Shamshirband, 2019. "Thermodynamic Assessment and Multi-Objective Optimization of Performance of Irreversible Dual-Miller Cycle," Energies, MDPI, vol. 12(20), pages 1-25, October.
    3. Akkaya, Ali Volkan & Sahin, Bahri & Erdem, Hasan Huseyin, 2009. "Thermodynamic model for exergetic performance of a tubular SOFC module," Renewable Energy, Elsevier, vol. 34(7), pages 1863-1870.
    4. Antonio Lecuona & José I. Nogueira & Antonio Famiglietti, 2021. "Open Dual Cycle with Composition Change and Limited Pressure for Prediction of Miller Engines Performance and Its Turbine Temperature," Energies, MDPI, vol. 14(10), pages 1-25, May.
    5. Meng, Fankai & Chen, Lingen & Feng, Yuanli & Xiong, Bing, 2017. "Thermoelectric generator for industrial gas phase waste heat recovery," Energy, Elsevier, vol. 135(C), pages 83-90.
    6. Ismael, Mhadi A. & A. Aziz, A. Rashid & Mohammed, Salah E. & Zainal A, Ezrann Z. & Baharom, Masri B. & Hagos, Ftwi Yohaness, 2021. "Macroscopic and microscopic spray structure of water-in-diesel emulsions," Energy, Elsevier, vol. 223(C).
    7. Ahmadi, Mohammad H. & Ahmadi, Mohammad-Ali & Maleki, Akbar & Pourfayaz, Fathollah & Bidi, Mokhtar & Açıkkalp, Emin, 2017. "Exergetic sustainability evaluation and multi-objective optimization of performance of an irreversible nanoscale Stirling refrigeration cycle operating with Maxwell–Boltzmann gas," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 80-92.
    8. Ge, Yanlin & Wu, Heng & Chen, Lingen & Feng, Huijun & Xie, Zhihui, 2023. "Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle," Energy, Elsevier, vol. 270(C).
    9. Marchetti, Dalmo & Wanke, Peter, 2020. "Efficiency of the rail sections in Brazilian railway system, using TOPSIS and a genetic algorithm to analyse optimized scenarios," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 135(C).
    10. Ngouateu Wouagfack, Paiguy Armand & Tchinda, Réné, 2013. "Finite-time thermodynamics optimization of absorption refrigeration systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 524-536.
    11. Wu, Lanmei & Lin, Guoxing & Chen, Jincan, 2010. "Parametric optimization of a solar-driven Braysson heat engine with variable heat capacity of the working fluid and radiation–convection heat losses," Renewable Energy, Elsevier, vol. 35(1), pages 95-100.
    12. Xia, Shaojun & Chen, Lingen & Sun, Fengrui, 2011. "Power-optimization of non-ideal energy converters under generalized convective heat transfer law via Hamilton-Jacobi-Bellman theory," Energy, Elsevier, vol. 36(1), pages 633-646.
    13. Chen, Lingen & Zhang, Wanli & Sun, Fengrui, 2007. "Power, efficiency, entropy-generation rate and ecological optimization for a class of generalized irreversible universal heat-engine cycles," Applied Energy, Elsevier, vol. 84(5), pages 512-525, May.
    14. Iqbal Shajahan Mohamed & Elumalai Perumal Venkatesan & Murugesan Parthasarathy & Sreenivasa Reddy Medapati & Mohamed Abbas & Erdem Cuce & Saboor Shaik, 2022. "Optimization of Performance and Emission Characteristics of the CI Engine Fueled with Preheated Palm Oil in Blends with Diesel Fuel," Sustainability, MDPI, vol. 14(23), pages 1-21, November.
    15. Ahmadi, Mohammad Hossein & Ahmadi, Mohammad Ali, 2016. "Multi objective optimization of performance of three-heat-source irreversible refrigerators based algorithm NSGAII," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 784-794.
    16. Ust, Yasin & Sahin, Bahri & Kodal, Ali & Akcay, Ismail Hakki, 2006. "Ecological coefficient of performance analysis and optimization of an irreversible regenerative-Brayton heat engine," Applied Energy, Elsevier, vol. 83(6), pages 558-572, June.
    17. Mohammad Hossein Ahmadi & Seyed Ali Banihashem & Mahyar Ghazvini & Milad Sadeghzadeh, 2018. "Thermo-economic and exergy assessment and optimization of performance of a hydrogen production system by using geothermal energy," Energy & Environment, , vol. 29(8), pages 1373-1392, December.
    18. Mousapour, Ashkan & Hajipour, Alireza & Rashidi, Mohammad Mehdi & Freidoonimehr, Navid, 2016. "Performance evaluation of an irreversible Miller cycle comparing FTT (finite-time thermodynamics) analysis and ANN (artificial neural network) prediction," Energy, Elsevier, vol. 94(C), pages 100-109.
    19. Zhao, Yingru & Chen, Jincan, 2006. "Performance analysis and parametric optimum criteria of an irreversible Atkinson heat-engine," Applied Energy, Elsevier, vol. 83(8), pages 789-800, August.
    20. Wu, Haifeng & Liu, Qibin & Xie, Gengxin & Guo, Shaopeng & Zheng, Jie & Su, Bosheng, 2020. "Performance investigation of a novel hybrid combined cooling, heating and power system with solar thermochemistry in different climate zones," Energy, Elsevier, vol. 190(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323422. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.