IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v260y2026ics0960148126000753.html

Enhancing melting-solidification performance of latent heat thermal energy storage units with twisted fins

Author

Listed:
  • Tang, Songzhen
  • Zhang, Dongliang
  • Wang, Wei
  • Xi, Huan
  • Wu, Xuehong
  • Guo, Ming

Abstract

To enhance the heat transfer efficiency of latent heat storage devices, this study proposed a novel composite fin structure and applied it to vertical shell-and-tube latent heat thermal energy storage (LHTES) units. The enthalpy-porosity method was used for numerical simulation of the phase change process, and the heat storage and release performance of different units was systematically evaluated. The results indicated that the novel configuration, combining longitudinal and twisted fins, significantly enhanced both natural convection and heat conduction, effectively compensating for the heat transfer limitations of traditional longitudinal and annular fins. Compared with conventional longitudinal fins, it reduced the complete melting and solidification time of the phase change material (PCM) by 32.57 % and 23.05 %. Although its complete solidification time was slightly longer than that of conventional annular fins, it achieved the highest heat storage and release rates. When the PCM reached a phase change fraction of 0.95, the heat storage and release capacities of this structure were 10.9 % and 3.4 % higher than those of annular fins, respectively. This study provides theoretical guidance for the design and development of new large-scale, high-efficiency latent heat storage devices.

Suggested Citation

  • Tang, Songzhen & Zhang, Dongliang & Wang, Wei & Xi, Huan & Wu, Xuehong & Guo, Ming, 2026. "Enhancing melting-solidification performance of latent heat thermal energy storage units with twisted fins," Renewable Energy, Elsevier, vol. 260(C).
    • Handle: RePEc:eee:renene:v:260:y:2026:i:c:s0960148126000753
    DOI: 10.1016/j.renene.2026.125250
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148126000753
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2026.125250?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Li, Xiuzhen & Chen, Sen & Tan, Yingying & Tian, Guo & Wang, Zhanwei & Tang, Songzhen & Wang, Lin, 2024. "Thermal storage performance of a novel shell-and-tube latent heat storage system: Active role of inner tube improvement and fin distribution optimization," Renewable Energy, Elsevier, vol. 228(C).
    2. Glen P. Peters & Robbie M. Andrew & Tom Boden & Josep G. Canadell & Philippe Ciais & Corinne Le Quéré & Gregg Marland & Michael R. Raupach & Charlie Wilson, 2013. "The challenge to keep global warming below 2 °C," Nature Climate Change, Nature, vol. 3(1), pages 4-6, January.
    3. Yang, Xiaohu & Lu, Zhao & Bai, Qingsong & Zhang, Qunli & Jin, Liwen & Yan, Jinyue, 2017. "Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins," Applied Energy, Elsevier, vol. 202(C), pages 558-570.
    4. Liu, Zemin & Gao, Xinyu & Huang, Xinyu & Xie, Yuan & Gao, Jiayi & Yang, Xiaohu & He, Qiusheng, 2025. "Evaluation on solar-biogas heating system for buildings: Thermal characteristics and role of heat storage sectors," Applied Energy, Elsevier, vol. 390(C).
    5. Tian, Lei & Wang, Jiangjiang & Zhao, Lei & Wei, Changqi, 2023. "Unsteady-state thermal performance analysis of cascaded packed-bed latent thermal storage in solar heating system," Energy, Elsevier, vol. 272(C).
    6. Steven Chu & Arun Majumdar, 2012. "Opportunities and challenges for a sustainable energy future," Nature, Nature, vol. 488(7411), pages 294-303, August.
    7. Liu, Jiazhen & Liu, Zhenrong & Song, Caiyue & Shi, Hong & Huang, Qi & Yuan, Nenglin, 2026. "Optimization of heat transfer in latent heat storage devices: coupled design of end plates and needle fins with stratified analysis," Renewable Energy, Elsevier, vol. 256(PD).
    8. Tavakoli, Ali & Farzaneh-Gord, Mahmood & Ebrahimi-Moghadam, Amir, 2023. "Using internal sinusoidal fins and phase change material for performance enhancement of thermal energy storage systems: Heat transfer and entropy generation analyses," Renewable Energy, Elsevier, vol. 205(C), pages 222-237.
    9. Longeon, Martin & Soupart, Adèle & Fourmigué, Jean-François & Bruch, Arnaud & Marty, Philippe, 2013. "Experimental and numerical study of annular PCM storage in the presence of natural convection," Applied Energy, Elsevier, vol. 112(C), pages 175-184.
    10. Ling, Yun-Zhi & Zhang, Xiao-Song & Wang, Feng & She, Xiao-Hui, 2020. "Performance study of phase change materials coupled with three-dimensional oscillating heat pipes with different structures for electronic cooling," Renewable Energy, Elsevier, vol. 154(C), pages 636-649.
    11. Huang, Yongping & Liu, Xiangdong, 2021. "Charging and discharging enhancement of a vertical latent heat storage unit by fractal tree-shaped fins," Renewable Energy, Elsevier, vol. 174(C), pages 199-217.
    12. Tang, Songzhen & Song, Yuling & Liu, Pinwei & Wu, Xuehong & Xu, Yanyan & Zhou, Junjie & Li, Xiuzhen, 2025. "Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins," Renewable Energy, Elsevier, vol. 243(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tang, Songzhen & Song, Yuling & Liu, Pinwei & Wu, Xuehong & Xu, Yanyan & Zhou, Junjie & Li, Xiuzhen, 2025. "Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins," Renewable Energy, Elsevier, vol. 243(C).
    2. Tang, Songzhen & Liu, Pinwei & Song, Yuling & Wu, Xuehong & Xu, Yanyan & Ao, Yunjin & Yang, Xiaohu, 2026. "Experimental study on discharging characteristics of thermal energy storage system with discontinuous fins," Renewable Energy, Elsevier, vol. 256(PI).
    3. Li, Xiuzhen & Chen, Sen & Tan, Yingying & Tian, Guo & Wang, Zhanwei & Tang, Songzhen & Wang, Lin, 2024. "Thermal storage performance of a novel shell-and-tube latent heat storage system: Active role of inner tube improvement and fin distribution optimization," Renewable Energy, Elsevier, vol. 228(C).
    4. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    5. Lu, Shixiang & Li, Yongkang & Guo, Xiaochao & Wang, Fang, 2025. "Characteristic analysis of annular plate heat exchanger based phase change thermal storage," Renewable Energy, Elsevier, vol. 246(C).
    6. Zhanjun Guo & Wu Zhou & Sen Liu & Zhangyang Kang & Rufei Tan, 2023. "Effects of Geometric Parameters and Heat-Transfer Fluid Injection Direction on Enhanced Phase-Change Energy Storage in Vertical Shell-and-Tube System," Sustainability, MDPI, vol. 15(17), pages 1-21, August.
    7. Serge Nyallang Nyamsi & Ivan Tolj & Mykhaylo Lototskyy, 2019. "Metal Hydride Beds-Phase Change Materials: Dual Mode Thermal Energy Storage for Medium-High Temperature Industrial Waste Heat Recovery," Energies, MDPI, vol. 12(20), pages 1-27, October.
    8. Yang, Xiaohu & Guo, Junfei & Yang, Bo & Cheng, Haonan & Wei, Pan & He, Ya-Ling, 2020. "Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit," Applied Energy, Elsevier, vol. 279(C).
    9. Zhang, Shuai & Yan, Yuying, 2023. "Energy, exergy and economic analysis of ceramic foam-enhanced molten salt as phase change material for medium- and high-temperature thermal energy storage," Energy, Elsevier, vol. 262(PA).
    10. Zhang, Shuai & Li, Ying & Yan, Yuying, 2024. "Hybrid sensible-latent heat thermal energy storage using natural stones to enhance heat transfer: Energy, exergy, and economic analysis," Energy, Elsevier, vol. 286(C).
    11. Kasper, Lukas & Pernsteiner, Dominik & Schirrer, Alexander & Jakubek, Stefan & Hofmann, René, 2023. "Experimental characterization, parameter identification and numerical sensitivity analysis of a novel hybrid sensible/latent thermal energy storage prototype for industrial retrofit applications," Applied Energy, Elsevier, vol. 344(C).
    12. Choi, Sung Ho & Sohn, Dong Kee & Ko, Han Seo, 2021. "Performance enhancement of latent heat thermal energy storage by bubble-driven flow," Applied Energy, Elsevier, vol. 302(C).
    13. Zhang, Shuai & Yan, Yuying, 2023. "Evaluation and optimisation of hybrid sensible-latent heat thermal energy storage unit with natural stones to enhance heat transfer," Renewable Energy, Elsevier, vol. 215(C).
    14. ELSihy, ELSaeed Saad & Xie, Haozhe & Wang, Tengxiao & Wang, Zuyuan, 2024. "Multi-factor numerical research on the melting dynamics improvement of an innovative gradient finned tube latent heat storage unit," Energy, Elsevier, vol. 313(C).
    15. Hong, Yuxiang & Cheng, Zihao & Li, Qing & Du, Juan, 2024. "Energy storage, thermal-hydraulic, and thermodynamic characteristics of a latent thermal energy storage system with 180-degree bifurcated fractal fins," Energy, Elsevier, vol. 297(C).
    16. Fei Ma & Tianji Zhu & Yalin Zhang & Xinli Lu & Wei Zhang & Feng Ma, 2023. "A Review on Heat Transfer Enhancement of Phase Change Materials Using Fin Tubes," Energies, MDPI, vol. 16(1), pages 1-25, January.
    17. Wang, Jiahao & Liu, Xiaomin & Desideri, Umberto, 2024. "Performance improvement evaluation of latent heat energy storage units using improved bi-objective topology optimization method," Applied Energy, Elsevier, vol. 364(C).
    18. Abdi, Amir & Martin, Viktoria & Chiu, Justin N.W., 2019. "Numerical investigation of melting in a cavity with vertically oriented fins," Applied Energy, Elsevier, vol. 235(C), pages 1027-1040.
    19. Janusz T. Cieśliński & Maciej Fabrykiewicz, 2023. "Thermal Energy Storage with PCMs in Shell-and-Tube Units: A Review," Energies, MDPI, vol. 16(2), pages 1-35, January.
    20. Zhu, Rongsheng & Jing, Dalei, 2024. "Numerical study on the discharging performance of a latent heat thermal energy storage system with fractal tree-shaped convergent fins," Renewable Energy, Elsevier, vol. 221(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:260:y:2026:i:c:s0960148126000753. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.