IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v243y2025ics0960148125002307.html
   My bibliography  Save this article

Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins

Author

Listed:
  • Tang, Songzhen
  • Song, Yuling
  • Liu, Pinwei
  • Wu, Xuehong
  • Xu, Yanyan
  • Zhou, Junjie
  • Li, Xiuzhen

Abstract

In this paper, a novel latent heat thermal energy storage (LHTES) system with discontinuous fins was proposed to simultaneously solve the problems of slow and uneven melting. The enthalpy-porosity method was used to investigate the melting process of paraffin in the vertical LHTES system, and the regulation mechanism of the novel fins on the melting rate and uniformity was analyzed. In addition, the effects of main fin length (L1), bifurcation angle (a) and periodic number (N) on the melting performance were examined. The results show that the main fin length and bifurcation angle have significant effects on the melting performance. When main fin length is greater than 15 mm, the effect of the bifurcation angle on the melting time is small, and the melting rate decreases with the increase of main fin length. With the larger periodic number, the melting time shows a trend of rapid decrease first and then slow decrease. Compared with longitudinal straight fins, the optimized structure (L1 = 15 mm, a = 54° and N = 10) reduced the melting time by about 31 % and 21 % at liquid phase fractions of 0.9 and 1.0, respectively, and the uniformity was significantly improved. This study provides theoretical guidance for the development of new LHTES systems.

Suggested Citation

  • Tang, Songzhen & Song, Yuling & Liu, Pinwei & Wu, Xuehong & Xu, Yanyan & Zhou, Junjie & Li, Xiuzhen, 2025. "Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins," Renewable Energy, Elsevier, vol. 243(C).
    • Handle: RePEc:eee:renene:v:243:y:2025:i:c:s0960148125002307
    DOI: 10.1016/j.renene.2025.122568
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148125002307
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2025.122568?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Huang, Yongping & Liu, Xiangdong, 2021. "Charging and discharging enhancement of a vertical latent heat storage unit by fractal tree-shaped fins," Renewable Energy, Elsevier, vol. 174(C), pages 199-217.
    2. Asegun Henry & Ravi Prasher & Arun Majumdar, 2020. "Five thermal energy grand challenges for decarbonization," Nature Energy, Nature, vol. 5(9), pages 635-637, September.
    3. Wang, Zhen & Wang, Yanlin & Yang, Laishun & Cui, Yi & Song, Lei & Yue, Guangxi, 2024. "Multi-objective optimization of heat charging performance of phase change materials in tree-shaped perforated fin heat exchangers," Energy, Elsevier, vol. 294(C).
    4. Steven Chu & Arun Majumdar, 2012. "Opportunities and challenges for a sustainable energy future," Nature, Nature, vol. 488(7411), pages 294-303, August.
    5. Li, Chuan & Li, Qi & Ge, Ruihuan, 2023. "Comparison of performance enhancement in a shell and tube based latent heat thermal energy storage device containing different structured fins," Renewable Energy, Elsevier, vol. 206(C), pages 994-1006.
    6. Zhang, Chengbin & Li, Jie & Chen, Yongping, 2020. "Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins," Applied Energy, Elsevier, vol. 259(C).
    7. Ge, Ruihuan & Li, Qi & Li, Chuan & Liu, Qing, 2022. "Evaluation of different melting performance enhancement structures in a shell-and-tube latent heat thermal energy storage system," Renewable Energy, Elsevier, vol. 187(C), pages 829-843.
    8. Zhu, Rongsheng & Jing, Dalei, 2024. "Numerical study on the discharging performance of a latent heat thermal energy storage system with fractal tree-shaped convergent fins," Renewable Energy, Elsevier, vol. 221(C).
    9. Longeon, Martin & Soupart, Adèle & Fourmigué, Jean-François & Bruch, Arnaud & Marty, Philippe, 2013. "Experimental and numerical study of annular PCM storage in the presence of natural convection," Applied Energy, Elsevier, vol. 112(C), pages 175-184.
    10. Li, Xiuzhen & Chen, Sen & Tan, Yingying & Tian, Guo & Wang, Zhanwei & Tang, Songzhen & Wang, Lin, 2024. "Thermal storage performance of a novel shell-and-tube latent heat storage system: Active role of inner tube improvement and fin distribution optimization," Renewable Energy, Elsevier, vol. 228(C).
    11. Huang, Xinyu & Li, Ze & Xie, Yuan & Gao, Jiayi & Yang, Xiaohu & Li, Ming-Jia, 2024. "Phase change heat storage and enhanced heat transfer based on metal foam under unsteady rotation conditions," Energy, Elsevier, vol. 306(C).
    12. Ait Laasri, Imad & Charai, Mouatassim & Mghazli, Mohamed Oualid & Outzourhit, Abdelkader, 2024. "Energy performance assessment of a novel enhanced solar thermal system with topology optimized latent heat thermal energy storage unit for domestic water heating," Renewable Energy, Elsevier, vol. 224(C).
    13. Xu, Yang & Ren, Qinlong & Zheng, Zhang-Jing & He, Ya-Ling, 2017. "Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media," Applied Energy, Elsevier, vol. 193(C), pages 84-95.
    14. Yang, Xiaohu & Yu, Jiabang & Guo, Zengxu & Jin, Liwen & He, Ya-Ling, 2019. "Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube," Applied Energy, Elsevier, vol. 239(C), pages 142-156.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Zhen & Wang, Yanlin & Yang, Laishun & Cui, Yi & Dong, Ao & Cui, Weiwei & Yue, Guangxi, 2024. "Heat charge performance prediction and optimization of locally refined bionic fin heat exchanger with PCM and nanoparticles based on NSGA-II," Renewable Energy, Elsevier, vol. 230(C).
    2. Zhang, Shuai & Yan, Yuying, 2023. "Energy, exergy and economic analysis of ceramic foam-enhanced molten salt as phase change material for medium- and high-temperature thermal energy storage," Energy, Elsevier, vol. 262(PA).
    3. Li, Xiuzhen & Chen, Sen & Tan, Yingying & Tian, Guo & Wang, Zhanwei & Tang, Songzhen & Wang, Lin, 2024. "Thermal storage performance of a novel shell-and-tube latent heat storage system: Active role of inner tube improvement and fin distribution optimization," Renewable Energy, Elsevier, vol. 228(C).
    4. Zhang, Shuai & Yan, Yuying, 2022. "Evaluation of discharging performance of molten salt/ceramic foam composite phase change material in a shell-and-tube latent heat thermal energy storage unit," Renewable Energy, Elsevier, vol. 198(C), pages 1210-1223.
    5. Hong, Yuxiang & Cheng, Zihao & Li, Qing & Du, Juan, 2024. "Energy storage, thermal-hydraulic, and thermodynamic characteristics of a latent thermal energy storage system with 180-degree bifurcated fractal fins," Energy, Elsevier, vol. 297(C).
    6. Zhao, Chuang-Yao & Jia, Chen-Yi & Xu, Ling-Ling & Zhang, Fang-Fang & Qi, Di & Song, Bing-Ye & Liu, Qing & Jiang, Jun-Min, 2024. "Heat transfer enhancement of PCM in the triple-pipe helical-coiled latent heat thermal energy storage unit and complete melting time correlation," Renewable Energy, Elsevier, vol. 236(C).
    7. Zheng, Zhang-Jing & Cai, Xiao & Yang, Chao & Xu, Yang, 2022. "Improving the solidification performance of a latent heat thermal energy storage unit using arrow-shaped fins obtained by an innovative fast optimization algorithm," Renewable Energy, Elsevier, vol. 195(C), pages 566-577.
    8. Zeng, Kuo & Gao, Junjie & Lu, Yongwen & Zuo, Hongyang & Chi, Bowen & Fang, Zheyu & Li, Jun & Xu, Huaqian & Li, Beiyang & Yang, Haiping & Chen, Hanping, 2024. "Comprehensive enhancement of melting-solidifying process in latent heat storage based on eccentric fin-foam combination," Energy, Elsevier, vol. 313(C).
    9. Mahdi, Jasim M. & Mohammed, Hayder I. & Hashim, Emad T. & Talebizadehsardari, Pouyan & Nsofor, Emmanuel C., 2020. "Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system," Applied Energy, Elsevier, vol. 257(C).
    10. Hong, Yuxiang & Cheng, Zihao & Li, Qing & Jia, Shuao & Xiao, Chengxiang & Du, Juan, 2024. "Thermal energy storage, heat transfer, and thermodynamic behaviors of nano phase change material in a concentric double tube unit with triple tree fins," Renewable Energy, Elsevier, vol. 235(C).
    11. Yang, Xiaohu & Guo, Junfei & Yang, Bo & Cheng, Haonan & Wei, Pan & He, Ya-Ling, 2020. "Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit," Applied Energy, Elsevier, vol. 279(C).
    12. Pei Cai & Youxue Jiang & He Wang & Liangyu Wu & Peng Cao & Yulong Zhang & Feng Yao, 2020. "Numerical Simulation on the Influence of the Longitudinal Fins on the Enhancement of a Shell-and-Tube Ice Storage Device," Sustainability, MDPI, vol. 12(6), pages 1-14, March.
    13. Zhang, Shuai & Li, Ying & Yan, Yuying, 2024. "Hybrid sensible-latent heat thermal energy storage using natural stones to enhance heat transfer: Energy, exergy, and economic analysis," Energy, Elsevier, vol. 286(C).
    14. Zhang, Shuai & Feng, Daili & Shi, Lei & Wang, Li & Jin, Yingai & Tian, Limei & Li, Ziyuan & Wang, Guoyong & Zhao, Lei & Yan, Yuying, 2021. "A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    15. Bie, Yu & Tang, Yilian & Liu, Weiyi & Hnydiuk-Stefan, Anna & Gupta, M.K. & Królczyk, Jolanta B. & Li, Z., 2024. "Optimization of a finned multi-tube latent heat storage system using new structure evaluation indexes," Energy, Elsevier, vol. 312(C).
    16. Choi, Sung Ho & Sohn, Dong Kee & Ko, Han Seo, 2021. "Performance enhancement of latent heat thermal energy storage by bubble-driven flow," Applied Energy, Elsevier, vol. 302(C).
    17. Modi, Nishant & Wang, Xiaolin & Negnevitsky, Michael, 2023. "Experimental investigation of the effects of inclination, fin height, and perforation on the thermal performance of a longitudinal finned latent heat thermal energy storage," Energy, Elsevier, vol. 274(C).
    18. Zhu, Chen & Mou, Xiaofeng & Bao, Zewei, 2024. "Optimization of tree-shaped fin structures towards enhanced discharging performance of metal hydride reactor for thermochemical heat storage based on entransy theory," Renewable Energy, Elsevier, vol. 220(C).
    19. Huang, Xinyu & Li, Fangfei & Xiao, Tian & Guo, Junfei & Wang, Fan & Gao, Xinyu & Yang, Xiaohu & He, Ya-Ling, 2023. "Investigation and optimization of solidification performance of a triplex-tube latent heat thermal energy storage system by rotational mechanism," Applied Energy, Elsevier, vol. 331(C).
    20. Zhou, Yuekuan & Zheng, Siqian & Hensen, Jan L.M., 2024. "Machine learning-based digital district heating/cooling with renewable integrations and advanced low-carbon transition," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:243:y:2025:i:c:s0960148125002307. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.