IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v241y2025ics0960148124023863.html
   My bibliography  Save this article

Study on the insulation resistance of proton exchange membrane fuel cell stacks

Author

Listed:
  • Guo, Mengdi
  • Qiu, Diankai
  • Yi, Peiyun
  • Peng, Linfa

Abstract

With the wide application of high-power proton exchange membrane fuel cell, the issue of insulation safety is becoming increasingly important. At present, fuel cell stack often suffers from a significant drop in insulation resistance or even insulation failure during operating process. In this paper, cooling water pathway resistance and gas pathway resistance were identified as the main factors affecting stack insulation resistance through theoretical analysis and experiments. A simulation model capable of predicting the stack insulation resistance was established by considering the structure of the stack. The increase in the conductivity of cooling water and the decrease in the surface resistance after the adsorption of droplet on various component surfaces are the primary reasons for the decrease in the insulation resistance of the stack. It was found that water pathway and gas pathway had a significant influence on the insulation resistance. Through introducing modified parameters representing the effect of geometric structures, a more accurate formula for calculating insulation resistance was proposed. And a reasonable method for the selection of electrical parameters was formed. For example, to meet the safety standards, when the conductivity of the cooling water reaches 5 μS/cm, tube material with a conductivity lower than 7.3 μS/cm should be selected to ensure that water pathway resistance is greater than 1 MΩ, while simultaneously ensuring that gas pathway resistance is greater than 1.526 MΩ.

Suggested Citation

  • Guo, Mengdi & Qiu, Diankai & Yi, Peiyun & Peng, Linfa, 2025. "Study on the insulation resistance of proton exchange membrane fuel cell stacks," Renewable Energy, Elsevier, vol. 241(C).
    • Handle: RePEc:eee:renene:v:241:y:2025:i:c:s0960148124023863
    DOI: 10.1016/j.renene.2024.122318
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148124023863
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2024.122318?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Zhou, Yu & Chen, Ben & Meng, Kai & Zhou, Haoran & Chen, Wenshang & Zhang, Ning & Deng, Qihao & Yang, Guanghua & Tu, Zhengkai, 2023. "Optimal design of a cathode flow field for performance enhancement of PEM fuel cell," Applied Energy, Elsevier, vol. 343(C).
    2. Ye, Lingfeng & Qiu, Diankai & Peng, Linfa & Lai, Xinmin, 2024. "Conduction mechanism analysis and modeling of different gas diffusion layers for PEMFC to improve their bulk conductivities via microstructure design," Applied Energy, Elsevier, vol. 362(C).
    3. Qiu, Diankai & Peng, Linfa & Yi, Peiyun & Lehnert, Werner & Lai, Xinmin, 2021. "Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    4. Giacoppo, Giosuè & Hovland, Scott & Barbera, Orazio, 2019. "2 kW Modular PEM fuel cell stack for space applications: Development and test for operation under relevant conditions," Applied Energy, Elsevier, vol. 242(C), pages 1683-1696.
    5. Novalin, Timon & Eriksson, Björn & Proch, Sebastian & Bexell, Ulf & Moffatt, Claire & Westlinder, Jörgen & Lagergren, Carina & Lindbergh, Göran & Lindström, Rakel Wreland, 2023. "Demonstrating the absence of metal ion contamination in operando PEM fuel cells utilizing unmodified stainless steel bipolar plates," Applied Energy, Elsevier, vol. 349(C).
    6. Song, Ke & Wang, Yimin & Ding, Yuhang & Xu, Hongjie & Mueller-Welt, Philip & Stuermlinger, Tobias & Bause, Katharina & Ehrmann, Christopher & Weinmann, Hannes W. & Schaefer, Jens & Fleischer, Juergen , 2022. "Assembly techniques for proton exchange membrane fuel cell stack: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lu, Guolong & Liu, Mingxin & Su, Xunkang & Zheng, Tongxi & Luan, Yang & Fan, Wenxuan & Cui, Hao & Liu, Zhenning, 2024. "Study on counter-flow mass transfer characteristics and performance optimization of commercial large-scale proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 359(C).
    2. Cai, Weiqiang & Zhou, Ruidong & Wang, Chenxia & Xie, Chao & Xiao, Liusheng & Zhang, Zhonggang & Yang, Chao & Yuan, Jinliang, 2025. "On characteristics and research development of coupled fuel cell stack performance and stress," Applied Energy, Elsevier, vol. 388(C).
    3. Zhang, Zhuo & Quan, Hong-Bing & Cai, Sai-Jie & Li, Zheng-Dao & Tao, Wen-Quan, 2025. "Design strategies for mainstream flow channels in large-area PEMFC: From typical units to large areas," Applied Energy, Elsevier, vol. 388(C).
    4. Oh, Taek Hyun, 2021. "Effect of cathode conditions on performance of direct borohydride–hydrogen peroxide fuel cell system for space exploration," Renewable Energy, Elsevier, vol. 178(C), pages 1156-1164.
    5. Zhiming Zhang & Jun Zhang & Tong Zhang, 2022. "Endplate Design and Topology Optimization of Fuel Cell Stack Clamped with Bolts," Sustainability, MDPI, vol. 14(8), pages 1-13, April.
    6. Jiang, Wei & Zhang, Kai & Huang, Xing & Cai, Zhen & Zheng, Jinjin & Kai, Yue & Zheng, Bailin & Song, Ke, 2024. "Influence of clamping pressure on contact pressure uniformity and electrical output performance of proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 353(PA).
    7. Zhou, Yu & Meng, Kai & Liu, Wei & Chen, Ke & Chen, Wenshang & Zhang, Ning & Chen, Ben, 2024. "Multi-objective optimization of comprehensive performance enhancement for proton exchange membrane fuel cell based on machine learning," Renewable Energy, Elsevier, vol. 232(C).
    8. Su, Wei & Lu, Zhifei & She, Xiaohui & Zhou, Junming & Wang, Feng & Sun, Bo & Zhang, Xiaosong, 2022. "Liquid desiccant regeneration for advanced air conditioning: A comprehensive review on desiccant materials, regenerators, systems and improvement technologies," Applied Energy, Elsevier, vol. 308(C).
    9. Pu, Zonghua & Zhang, Gaixia & Hassanpour, Amir & Zheng, Dewen & Wang, Shanyu & Liao, Shijun & Chen, Zhangxin & Sun, Shuhui, 2021. "Regenerative fuel cells: Recent progress, challenges, perspectives and their applications for space energy system," Applied Energy, Elsevier, vol. 283(C).
    10. Fan, Lixin & Tu, Zhengkai & Cai, Shanshan & Miao, Bin & Ding, Ovi Lian & Chen, Yongtao & Chan, Siew Hwa, 2025. "Design principles and analysis of manifold design in a large-scale PEMFC stack," Energy, Elsevier, vol. 319(C).
    11. Sun, Feng & Su, Dandan & Li, Ping & Lin, Fanxin & Miu, Guodong & Wan, Qi & Yin, Yujie, 2024. "Effects of three-dimensional type flow fields on mass transfer and performance of proton exchange membrane fuel cell," Energy, Elsevier, vol. 295(C).
    12. Abdul Ghani Olabi & Tabbi Wilberforce & Abdulrahman Alanazi & Parag Vichare & Enas Taha Sayed & Hussein M. Maghrabie & Khaled Elsaid & Mohammad Ali Abdelkareem, 2022. "Novel Trends in Proton Exchange Membrane Fuel Cells," Energies, MDPI, vol. 15(14), pages 1-35, July.
    13. Meng, Kai & Zhou, Haoran & Chen, Ben & Tu, Zhengkai, 2021. "Dynamic current cycles effect on the degradation characteristic of a H2/O2 proton exchange membrane fuel cell," Energy, Elsevier, vol. 224(C).
    14. Liu, Yang & Zhao, Junjie & Tu, Zhengkai, 2024. "Detecting performance degradation in a dead-ended hydrogen-oxygen proton exchange membrane fuel cell used for an unmanned underwater vehicle," Renewable Energy, Elsevier, vol. 222(C).
    15. Zhi Chen & Yanfeng Xing & Juyong Cao & Fuyong Yang & Xiaobing Zhang, 2023. "Leakage Analysis of PEMFC Sealing System Considering Temperature Cycling," Energies, MDPI, vol. 16(14), pages 1-16, July.
    16. Li, Li & Wang, Hongkang & Bei, Shaoyi & Li, Yuanjiang & Sun, Yanyun & Zheng, Keqing & Xu, Qiang, 2023. "Unsymmetrical design and operation in counter-flow microfluidic fuel cell: A prospective study," Energy, Elsevier, vol. 262(PB).
    17. Lu, Yirui & Yang, Daijun & Wu, Haoyu & Jia, Linhan & Chen, Jie & Ming, Pingwen & Pan, Xiangmin, 2024. "Degradation mechanism analysis of a fuel cell stack based on perfluoro sulfonic acid membrane in near-water boiling temperature environment," Renewable Energy, Elsevier, vol. 234(C).
    18. Wang, Yulin & Guan, Chao & Li, Hua & Zhao, Yulong & Wang, Cheng & He, Wei, 2023. "Flow field configuration design for a large-scale hydrogen polymer electrolyte membrane fuel cell," Applied Energy, Elsevier, vol. 351(C).
    19. Liu, Jinping & Luo, Zixian & Hu, Jianping & Cai, Yonghua, 2025. "Study on a novel self-adaptive cathode flow field with deformable baffles for proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 377(PA).
    20. Zhang, Zhuo & Cai, Sai-jie & Li, Zheng-dao & Tao, Wen-Quan, 2024. "Electrical and thermal performance analysis of PEMFC with coolant flow field under steady-state condition," Energy, Elsevier, vol. 306(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:241:y:2025:i:c:s0960148124023863. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.