IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v207y2023icp73-88.html

Broadening the operating range of pump-turbine to deep-part load by runner optimization

Author

Listed:
  • Hu, Zanao
  • Cheng, Yongguang
  • Liu, Demin
  • Chen, Hongyu
  • Ji, Bin
  • Ding, Jinghuan

Abstract

To cooperate with new energy sources such as wind and solar, pumped storage units are required to frequently change conditions and operate under part loads, leading to the problem of violent pressure fluctuation and unit vibration. To meet this challenge, the next generation of pump-turbine runners will therefore have to be designed differently. The goal of this article is to construct a framework for broadening the operating range of pump-turbine to deep-part loads. In this study, a multi-objective optimization strategy for the runner with wider output range is suggested, wherein the blade control parameters, specifically the blade loading and blade lean angle, are optimized to enhance the efficiency, anti-cavitation, and stability of the pump-turbine runner. A runner with turbine output range of 40%–100% is optimized for a specific power station. Next, the impact of runner control parameters on runner performance is evaluated, and the runner geometric characteristics for different optimizing priorities such as the pump peak efficiency, cavitation performance, turbine rated efficiency, and turbine partial load efficiency, are concluded. The mutual restriction mechanism between the pump peak efficiency and cavitation performance of pump mode, as well as the turbine-rated efficiency and partial load efficiency of turbine mode, is revealed. The main contributions of this paper include putting forward an effective optimization design process for wide output pump-turbine, and pointing out the relationship between runner geometric characteristics and performance. The results indicate that the present approach can significantly improve the efficiency and stability of runners operating in deep-part loads. The blade loading pattern with hub section aft-loaded and shroud section fore-loaded, combined with negative blade lean angle, is recommended for such runners. Blades with a smaller wrap angle and lower arch are conducive to improving the pump peak efficiency and turbine-rated efficiency, while the opposite geometrical features are advantageous for improving the runner cavitation performance and efficiency performance under part load conditions. These findings can serve as an important guide for the development of runners with a wider output range.

Suggested Citation

  • Hu, Zanao & Cheng, Yongguang & Liu, Demin & Chen, Hongyu & Ji, Bin & Ding, Jinghuan, 2023. "Broadening the operating range of pump-turbine to deep-part load by runner optimization," Renewable Energy, Elsevier, vol. 207(C), pages 73-88.
    • Handle: RePEc:eee:renene:v:207:y:2023:i:c:p:73-88
    DOI: 10.1016/j.renene.2023.03.005
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123002914
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.03.005?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Qin, Yonglin & Li, Deyou & Wang, Hongjie & Liu, Zhansheng & Wei, Xianzhu & Wang, Xiaohang, 2022. "Multi-objective optimization design on high pressure side of a pump-turbine runner with high efficiency," Renewable Energy, Elsevier, vol. 190(C), pages 103-120.
    2. Linhai Liu & Baoshan Zhu & Li Bai & Xiaobing Liu & Yue Zhao, 2017. "Parametric Design of an Ultrahigh-Head Pump-Turbine Runner Based on Multiobjective Optimization," Energies, MDPI, vol. 10(8), pages 1-16, August.
    3. Xiaoran, Zhao & Yexiang, Xiao & Zhengwei, Wang & Hongying, Luo & Soo-Hwang, Ahn & Yangyang, Yao & Honggang, Fan, 2018. "Numerical analysis of non-axisymmetric flow characteristic for a pump-turbine impeller at pump off-design condition," Renewable Energy, Elsevier, vol. 115(C), pages 1075-1085.
    4. Devabhaktuni, Vijay & Alam, Mansoor & Shekara Sreenadh Reddy Depuru, Soma & Green, Robert C. & Nims, Douglas & Near, Craig, 2013. "Solar energy: Trends and enabling technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 555-564.
    5. Ma, Zhe & Zhu, Baoshan, 2020. "Pressure fluctuations in vaneless space of pump-turbines with large blade lean runners in the S- shaped region," Renewable Energy, Elsevier, vol. 153(C), pages 1283-1295.
    6. Yang, Zhiyan & Cheng, Yongguang & Xia, Linsheng & Meng, Wanwan & Liu, Ke & Zhang, Xiaoxi, 2020. "Evolutions of flow patterns and pressure fluctuations in a prototype pump-turbine during the runaway transient process after pump-trip," Renewable Energy, Elsevier, vol. 152(C), pages 1149-1159.
    7. Kim, Joon-Hyung & Cho, Bo-Min & Kim, Sung & Kim, Jin-Woo & Suh, Jun-Won & Choi, Young-Seok & Kanemoto, Toshiaki & Kim, Jin-Hyuk, 2017. "Design technique to improve the energy efficiency of a counter-rotating type pump-turbine," Renewable Energy, Elsevier, vol. 101(C), pages 647-659.
    8. Li, Deyou & Qin, Yonglin & Wang, Jianpeng & Zhu, Yutong & Wang, Hongjie & Wei, Xianzhu, 2022. "Optimization of blade high-pressure edge to reduce pressure fluctuations in pump-turbine hump region," Renewable Energy, Elsevier, vol. 181(C), pages 24-38.
    9. Tao, Ran & Xiao, Ruofu & Wang, Fujun & Liu, Weichao, 2019. "Improving the cavitation inception performance of a reversible pump-turbine in pump mode by blade profile redesign: Design concept, method and applications," Renewable Energy, Elsevier, vol. 133(C), pages 325-342.
    10. Giosio, D.R. & Henderson, A.D. & Walker, J.M. & Brandner, P.A. & Sargison, J.E. & Gautam, P., 2015. "Design and performance evaluation of a pump-as-turbine micro-hydro test facility with incorporated inlet flow control," Renewable Energy, Elsevier, vol. 78(C), pages 1-6.
    11. Zhu, Baoshan & Wang, Xuhe & Tan, Lei & Zhou, Dongyue & Zhao, Yue & Cao, Shuliang, 2015. "Optimization design of a reversible pump–turbine runner with high efficiency and stability," Renewable Energy, Elsevier, vol. 81(C), pages 366-376.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shojaeefard, Mohammad Hassan & Saremian, Salman, 2023. "Studying the impact of impeller geometrical parameters on the high-efficiency working range of pump as turbine (PAT) installed in the water distribution network," Renewable Energy, Elsevier, vol. 216(C).
    2. Hu, Zanao & Cheng, Yongguang & Zhang, Pengcheng & Li, Wenxin & Zhang, Jian & Ma, Yanmei & Hu, Zhaohua & Li, Gui fen, 2025. "Runner modification optimization design method for pump-turbine runner considering hydraulic transient guarantee parameter constraints," Energy, Elsevier, vol. 340(C).
    3. Hu, Zanao & Cheng, Yongguang & Chen, Hongyu & Liu, Demin & Ji, Bin & Wang, Zhiyuan & Zhang, Pengcheng & Xue, Song, 2024. "Predicting pump-turbine characteristic curves by theoretical models based on runner geometry parameters," Energy, Elsevier, vol. 301(C).
    4. Lei, Shuaihao & Cheng, Li & Sheng, Weigao, 2024. "Study on power losses and pressure fluctuations of diffuser mixed flow pump as turbine on different power generation speeds based on energy power models," Renewable Energy, Elsevier, vol. 237(PC).
    5. Zhou, Xing & Hu, Xinyi & Huang, Quanshui & Wu, Hegao & Tang, Xiaodan & Cervantes, Michel J., 2024. "Optimization design of an innovative francis draft tube: Insight into improving operational flexibility," Energy, Elsevier, vol. 299(C).
    6. Israel Enema Ohiemi & Aonghus McNabola, 2025. "Design Optimisation of Legacy Francis Turbine Using Inverse Design and CFD: A Case Study of Bérchules Hydropower Plant," Energies, MDPI, vol. 18(21), pages 1-27, October.
    7. Lu, Yangping & Tan, Lei, 2024. "Design method based on a new slip-diffusion parameter of centrifugal pump for multiple conditions in wide operation region," Energy, Elsevier, vol. 294(C).
    8. Han, Shuangqian & Jiang, Zhenyu & Chen, Zhenmu & Zhao, Haoru & Zhu, Baoshan, 2026. "Deep learning-based prediction of efficiency and pressure in a reversible pump-turbine," Renewable Energy, Elsevier, vol. 256(PA).
    9. Xue, Song & Cheng, Yongguang & Li, Wenxin & Guan, Ziwu & Zhang, Jian, 2025. "Enhancing operational stability of an ultra-high-head pump-turbine using guide-vanes with horizontal blades," Energy, Elsevier, vol. 340(C).
    10. Xu, Lianchen & Zhang, Yuquan & Xu, Junhui & Wang, Yirong & Feng, Chen & Yang, Yuxuan & Liu, Demin & Liu, Xiaobing & Zheng, Yuan, 2025. "Towards the integration of new-type power systems: Hydraulic stability analysis of pumped storage units in the S-characteristic region based on experimental and CFD studies," Energy, Elsevier, vol. 329(C).
    11. Zhou, Tingxin & Yu, Xiaodong & Zhang, Jian & Shi, Lin & Xu, Hui, 2025. "Pressure pulsations intelligent prediction model for load rejection of pumped storage power station based on data augmentation and one-dimensional convolutional neural network," Energy, Elsevier, vol. 330(C).
    12. Wang, Ran & Yang, Weijia & Huang, Yifan & Li, Xudong & Liu, Yuanhong & Chen, Jingdan & Cheng, Qian & Mei, Yadong & Cheng, Yongguang & Liu, Pan, 2024. "Coordinating regulation reliability and quality of pumped storage units for renewables by a novel scheduling-control synergic model," Applied Energy, Elsevier, vol. 376(PA).
    13. Zhou, Xing & Zhang, Yuhaomai & Cheng, Li & Huang, Quanshui & Cervantes, Michel J., 2026. "Improvement of S-shaped instability and power performance of a reversible pump-turbine runner," Renewable Energy, Elsevier, vol. 258(C).
    14. Shen, Jiawei & Pei, Ji & Wang, Wenjie & Yuan, Shouqi & Pavesi, Giorgio, 2025. "Broader high-efficiency zone of micro-pumped hydro storage enabled by a variable-speed reversible mixed-flow pump: Taking acceleration as an example," Renewable Energy, Elsevier, vol. 253(C).
    15. Li, Xudong & Wu, Peilin & Shi, Wenzhuo & Ding, Yibo & Liao, Yiwen & Sun, Xianzhuo & Huang, Sunhua & Zhao, Zhigao & Yang, Weijia & Xu, Zhao, 2025. "Hydraulic transient-aware day-ahead dispatch of hydro-wind-solar hybrid energy system," Energy, Elsevier, vol. 340(C).
    16. Pan, Qiang & Wu, Yuehu & Zhang, Desheng & Shi, Weidong & van Esch, B.P.M., 2024. "Coordination of energy loss and fish friendliness for a low-head tubular-pump blade based on a multi-objective optimization model," Renewable Energy, Elsevier, vol. 237(PB).
    17. Zhou, Tingxin & Yu, Xiaodong & Zhang, Jian & Xu, Hui, 2025. "Effects of the system parameters on the extreme low pressure of the draft tube during the successive load rejection using a systematic analysis framework," Energy, Elsevier, vol. 320(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hu, Jinhong & Zhao, Zhigao & He, Xianghui & Zeng, Wei & Yang, Jiebin & Yang, Jiandong, 2023. "Design techniques for improving energy performance and S-shaped characteristics of a pump-turbine with splitter blades," Renewable Energy, Elsevier, vol. 212(C), pages 333-349.
    2. Wang, Kaijie & Wang, Shuli & Meng, Puyu & Wang, Chengpeng & Li, Yuhai & Zheng, Wenxian & Liu, Jun & Kou, Jiawen, 2023. "Strategies employed in the design and optimization of pump as turbine runner," Renewable Energy, Elsevier, vol. 216(C).
    3. Hu, Zanao & Cheng, Yongguang & Zhang, Pengcheng & Li, Wenxin & Zhang, Jian & Ma, Yanmei & Hu, Zhaohua & Li, Gui fen, 2025. "Runner modification optimization design method for pump-turbine runner considering hydraulic transient guarantee parameter constraints," Energy, Elsevier, vol. 340(C).
    4. Hu, Jinhong & Yang, Jiebin & He, Xianghui & Zeng, Wei & Zhao, Zhigao & Yang, Jiandong, 2023. "Transition of amplitude–frequency characteristic in rotor–stator interaction of a pump-turbine with splitter blades," Renewable Energy, Elsevier, vol. 205(C), pages 663-677.
    5. Xiaobo Zheng & Yaping Zhao & Huan Zhang & Yongjian Pu & Zhihua Li & Pengcheng Guo, 2022. "Optimization and Performance Analysis of Francis Turbine Runner Based on Super-Transfer Approximate Method under Multi-Energy Complementary Conditions," Sustainability, MDPI, vol. 14(16), pages 1-16, August.
    6. Wei Yang & Benqing Liu & Ruofu Xiao, 2019. "Three-Dimensional Inverse Design Method for Hydraulic Machinery," Energies, MDPI, vol. 12(17), pages 1-19, August.
    7. Han, Shuangqian & Qin, Yonglin & Zhu, Baoshan, 2025. "Multi-objective optimization design of a pump-turbine runner based on machine learning method," Energy, Elsevier, vol. 336(C).
    8. Zhao, Ziwen & Yuan, Yichen & He, Mengjiao & Jurasz, Jakub & Wang, Jianan & Egusquiza, Mònica & Egusquiza, Eduard & Xu, Beibei & Chen, Diyi, 2022. "Stability and efficiency performance of pumped hydro energy storage system for higher flexibility," Renewable Energy, Elsevier, vol. 199(C), pages 1482-1494.
    9. Qin, Yonglin & Li, Deyou & Wang, Hongjie & Liu, Zhansheng & Wei, Xianzhu & Wang, Xiaohang & Yang, Weibin, 2023. "Comprehensive hydraulic performance improvement in a pump-turbine: An experimental investigation," Energy, Elsevier, vol. 284(C).
    10. Pei, Ji & Shen, Jiawei & Wang, Wenjie & Yuan, Shouqi & Zhao, Jiantao, 2024. "Evaluating hydraulic dissipation in a reversible mixed-flow pump for micro-pumped hydro storage based on entropy production theory," Renewable Energy, Elsevier, vol. 225(C).
    11. Binama, Maxime & Kan, Kan & Chen, Hui-Xiang & Zheng, Yuan & Zhou, Daqing & Su, Wen-Tao & Muhirwa, Alexis & Ntayomba, James, 2021. "Flow instability transferability characteristics within a reversible pump turbine (RPT) under large guide vane opening (GVO)," Renewable Energy, Elsevier, vol. 179(C), pages 285-307.
    12. Hongbo Zhao & Xiangkai Zhou & Long Meng & Xuejin Zhu & Chengqi Mou & Peijian Zhou, 2024. "Advances in Flow Control Methods for Pump-Stall Suppression: Passive and Active Approaches," Energies, MDPI, vol. 17(23), pages 1-22, December.
    13. Yang, Gang & Shen, Xi & Pan, Qiang & Ding, Jingfei & Luo, Wenhua & Meng, Jia & Zhang, Desheng, 2025. "Multi-objective optimization design for broadening the high efficiency region of hydrodynamic turbine with forward-curved impeller and energy loss analysis," Renewable Energy, Elsevier, vol. 245(C).
    14. Zhang, Fangfang & Fang, Mingkun & Pan, Jiale & Tao, Ran & Zhu, Di & Liu, Weichao & Xiao, Ruofu, 2023. "Guide vane profile optimization of pump-turbine for grid connection performance improvement," Energy, Elsevier, vol. 274(C).
    15. Suh, Jun-Won & Kim, Seung-Jun & Kim, Jin-Hyuk & Joo, Won-Gu & Park, Jungwan & Choi, Young-Seok, 2020. "Effect of interface condition on the hydraulic characteristics of a pump-turbine at various guide vane opening conditions in pump mode," Renewable Energy, Elsevier, vol. 154(C), pages 986-1004.
    16. Xiuli Mao & Jiaren Hu & Zhongyong Pan & Pengju Zhong & Ning Zhang, 2025. "A Brief Review of Recent Research on Reversible Francis Pump Turbines in Pumped Storage Plants," Energies, MDPI, vol. 18(2), pages 1-19, January.
    17. Binama, Maxime & Su, Wen-Tao & Li, Xiao-Bin & Li, Feng-Chen & Wei, Xian-Zhu & An, Shi, 2017. "Investigation on pump as turbine (PAT) technical aspects for micro hydropower schemes: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 148-179.
    18. Chen, Zhenmu & Jiang, Zhenyu & Chen, Shuai & Zhang, Wenwu & Zhu, Baoshan, 2023. "Experimental and numerical study on flow instability of pump-turbine under runaway conditions," Renewable Energy, Elsevier, vol. 210(C), pages 335-345.
    19. Lu, Jiahao & Tao, Ran & Yao, Zhifeng & Xiao, Ruofu & Liu, Weichao, 2025. "Transient simulation energy study of fast opening of guide vane during start-up of pump turbine in energy storage mode," Energy, Elsevier, vol. 324(C).
    20. Xiuli Mao & Guoqing Wen & Yuchuan Wang & Jiaren Hu & Xuetao Gan & Pengju Zhong, 2025. "Development of WHED Method to Study Operational Stability of Typical Transitions in a Hydropower Plant and a Pumped Storage Plant," Energies, MDPI, vol. 18(6), pages 1-28, March.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:207:y:2023:i:c:p:73-88. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.