IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v203y2023icp828-840.html
   My bibliography  Save this article

Influence of homeomorphism of the surface of a wood particle on the characteristics of its ignition

Author

Listed:
  • Kuznetsov, G.V.
  • Syrodoy, S.V.
  • Borisov, B.V.
  • Kostoreva, Zh.A.
  • Gutareva, N. Yu
  • Kostoreva, A.A.

Abstract

The article presents the results of the experimental studies carried out to analyze the connections between the configuration of the particles and the delay time of their ignition. The results of the experimental studies of the ignition processes of woody biomass particles of various shapes and sizes, but identical volumes, as applied to the heating conditions in the combustion chambers of the typical boiler units, are obtained. Three shapes of wood particles were studied: a rectangular parallelepiped, a cube, and a plate. Quite non-obvious (based on traditional concepts) dependences of the ignition delay times on the characteristic sizes of wood particles have also been established: under conditions of relatively low ambient temperatures (Tg = 873K), the characteristic size and shape have a significant effect on the characteristics and conditions of ignition. In the case of ignition of plates, the dependence tign(δ) is linear; in the case of ignition of cubic particles, the dependence tign(δ) is nonmonotonic with a local minimum; in the case of ignition of biomass particles in the form of parallelepipeds, the function tign(δ) has a nonmonotonic character with a local maximum of the value of tign.

Suggested Citation

  • Kuznetsov, G.V. & Syrodoy, S.V. & Borisov, B.V. & Kostoreva, Zh.A. & Gutareva, N. Yu & Kostoreva, A.A., 2023. "Influence of homeomorphism of the surface of a wood particle on the characteristics of its ignition," Renewable Energy, Elsevier, vol. 203(C), pages 828-840.
    • Handle: RePEc:eee:renene:v:203:y:2023:i:c:p:828-840
    DOI: 10.1016/j.renene.2022.12.097
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122018936
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2022.12.097?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Congyu & Ho, Shih-Hsin & Chen, Wei-Hsin & Xie, Youping & Liu, Zhenquan & Chang, Jo-Shu, 2018. "Torrefaction performance and energy usage of biomass wastes and their correlations with torrefaction severity index," Applied Energy, Elsevier, vol. 220(C), pages 598-604.
    2. Mladenović, Milica & Paprika, Milijana & Marinković, Ana, 2018. "Denitrification techniques for biomass combustion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3350-3364.
    3. Abdo, Saber & Saidani-Scott, Hind & Benedi, Jorge & Abdelrahman, M.A., 2020. "Hydrogels beads for cooling solar panels: Experimental study," Renewable Energy, Elsevier, vol. 153(C), pages 777-786.
    4. Magadley, Esther & Kabha, Ragheb & Yehia, Ibrahim, 2021. "Outdoor comparison of two organic photovoltaic panels: The effect of solar incidence angles and incident irradiance," Renewable Energy, Elsevier, vol. 173(C), pages 721-732.
    5. Míguez, J.L. & Morán, J.C. & Granada, E. & Porteiro, J., 2012. "Review of technology in small-scale biomass combustion systems in the European market," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 3867-3875.
    6. Zhao, Pan & Xu, Wenpan & Liu, Aijie & Wu, Wenze & Wang, Jiangfeng & Yan, Zhequan, 2022. "Performance evaluation of a renewable driven standalone combined power and water supply system with cascade electricity and heat storage," Renewable Energy, Elsevier, vol. 199(C), pages 1283-1299.
    7. Clancy, John Matthew & Curtis, John & Ó’Gallachóir, Brian, 2018. "Modelling national policy making to promote bioenergy in heat, transport and electricity to 2030 – Interactions, impacts and conflicts," Energy Policy, Elsevier, vol. 123(C), pages 579-593.
    8. Tanui, J.K. & Kioni, P.N. & Mirre, T. & Nowitzki, M. & Karuri, N.W., 2020. "The influence of particle packing density on wood combustion in a fixed bed under oxy-fuel conditions," Energy, Elsevier, vol. 194(C).
    9. Kuznetsov, G.V. & Syrodoy, S.V. & Gutareva, N.Y., 2020. "Influence of a wet wood particle form on the characteristics of its ignition in the high-temperature medium," Renewable Energy, Elsevier, vol. 145(C), pages 1474-1486.
    10. Xie, Mingxi & Jia, Teng & Dai, Yanjun, 2022. "Hybrid photovoltaic/solar chimney power plant combined with agriculture: The transformation of a decommissioned coal-fired power plant," Renewable Energy, Elsevier, vol. 191(C), pages 1-16.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Larionov, K.B. & Mishakov, I.V. & Gorshkov, A.S. & Kaltaev, A.Zh. & Asilbekov, A.K. & Gubin, A.V. & Slyusarsky, K.V. & Gerasimov, R.D. & Vedyagin, A.A., 2023. "Activation of the combustion of low-reactivity solid fuels with metal-rolling production waste," Energy, Elsevier, vol. 278(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Xuebin & Zhang, Jiaye & Xu, Xinwei & Mikulčić, Hrvoje & Li, Yan & Zhou, Yuegui & Tan, Houzhang, 2020. "Numerical study of biomass Co-firing under Oxy-MILD mode," Renewable Energy, Elsevier, vol. 146(C), pages 2566-2576.
    2. Xiong, Kang & Hu, Weihao & Cao, Di & Li, Sichen & Zhang, Guozhou & Liu, Wen & Huang, Qi & Chen, Zhe, 2023. "Coordinated energy management strategy for multi-energy hub with thermo-electrochemical effect based power-to-ammonia: A multi-agent deep reinforcement learning enabled approach," Renewable Energy, Elsevier, vol. 214(C), pages 216-232.
    3. Wijayasekera, Sachindra Chamode & Hewage, Kasun & Hettiaratchi, Patrick & Razi, Faran & Sadiq, Rehan, 2023. "Planning and development of waste-to-hydrogen conversion facilities: A parametric analysis," Energy, Elsevier, vol. 278(PA).
    4. Carlon, Elisa & Verma, Vijay Kumar & Schwarz, Markus & Golicza, Laszlo & Prada, Alessandro & Baratieri, Marco & Haslinger, Walter & Schmidl, Christoph, 2015. "Experimental validation of a thermodynamic boiler model under steady state and dynamic conditions," Applied Energy, Elsevier, vol. 138(C), pages 505-516.
    5. Sakiewicz, Piotr & Piotrowski, Krzysztof & Kalisz, Sylwester, 2020. "Neural network prediction of parameters of biomass ashes, reused within the circular economy frame," Renewable Energy, Elsevier, vol. 162(C), pages 743-753.
    6. Campbell, William A. & Coller, Amy & Evitts, Richard W., 2019. "Comparing severity of continuous torrefaction for five biomass with a wide range of bulk density and particle size," Renewable Energy, Elsevier, vol. 141(C), pages 964-972.
    7. Reichert, G. & Hartmann, H. & Haslinger, W. & Oehler, H. & Mack, R. & Schmidl, C. & Schön, C. & Schwabl, M. & Stressler, H. & Sturmlechner, R. & Hochenauer, C., 2017. "Effect of draught conditions and ignition technique on combustion performance of firewood roomheaters," Renewable Energy, Elsevier, vol. 105(C), pages 547-560.
    8. Akbari, Maryam & Oyedun, Adetoyese Olajire & Kumar, Amit, 2020. "Techno-economic assessment of wet and dry torrefaction of biomass feedstock," Energy, Elsevier, vol. 207(C).
    9. Safar, Michal & Lin, Bo-Jhih & Chen, Wei-Hsin & Langauer, David & Chang, Jo-Shu & Raclavska, H. & Pétrissans, Anélie & Rousset, Patrick & Pétrissans, Mathieu, 2019. "Catalytic effects of potassium on biomass pyrolysis, combustion and torrefaction," Applied Energy, Elsevier, vol. 235(C), pages 346-355.
    10. Kim, Heeyoon & Yu, Seunghan & Ra, Howon & Yoon, Sungmin & Ryu, Changkook, 2023. "Prediction of pyrolysis kinetics for torrefied biomass based on raw biomass properties and torrefaction severity," Energy, Elsevier, vol. 278(C).
    11. Mohd Idris, Muhammad Nurariffudin & Hashim, Haslenda & Leduc, Sylvain & Yowargana, Ping & Kraxner, Florian & Woon, Kok Sin, 2021. "Deploying bioenergy for decarbonizing Malaysian energy sectors and alleviating renewable energy poverty," Energy, Elsevier, vol. 232(C).
    12. Magdalena Dołżyńska & Sławomir Obidziński & Jolanta Piekut & Güray Yildiz, 2020. "The Utilization of Plum Stones for Pellet Production and Investigation of Post-Combustion Flue Gas Emissions," Energies, MDPI, vol. 13(19), pages 1-19, October.
    13. Manuel Uche-Soria & Carlos Rodríguez-Monroy, 2019. "An Efficient Waste-To-Energy Model in Isolated Environments. Case Study: La Gomera (Canary Islands)," Sustainability, MDPI, vol. 11(11), pages 1-21, June.
    14. Stanisławski, Rafał & Robert Junga, & Nitsche, Marek, 2022. "Reduction of the CO emission from wood pellet small-scale boiler using model-based control," Energy, Elsevier, vol. 243(C).
    15. Zhang, Congyu & Ho, Shih-Hsin & Chen, Wei-Hsin & Wang, Rupeng, 2021. "Comparative indexes, fuel characterization and thermogravimetric- Fourier transform infrared spectrometer-mass spectrogram (TG-FTIR-MS) analysis of microalga Nannochloropsis Oceanica under oxidative a," Energy, Elsevier, vol. 230(C).
    16. Zhang, Congyu & Chen, Wei-Hsin & Ho, Shih-Hsin, 2022. "Elemental loss, enrichment, transformation and life cycle assessment of torrefied corncob," Energy, Elsevier, vol. 242(C).
    17. Antonios Nazos & Dorothea Politi & Georgios Giakoumakis & Dimitrios Sidiras, 2022. "Simulation and Optimization of Lignocellulosic Biomass Wet- and Dry-Torrefaction Process for Energy, Fuels and Materials Production: A Review," Energies, MDPI, vol. 15(23), pages 1-35, November.
    18. Shi, Yan & Ge, Ying & Chang, Jie & Shao, Hongbo & Tang, Yuli, 2013. "Garden waste biomass for renewable and sustainable energy production in China: Potential, challenges and development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 432-437.
    19. Maja Ivanovski & Aleksandra Petrovič & Darko Goričanec & Danijela Urbancl & Marjana Simonič, 2023. "Exploring the Properties of the Torrefaction Process and Its Prospective in Treating Lignocellulosic Material," Energies, MDPI, vol. 16(18), pages 1-20, September.
    20. Kunle Babaremu & Nmesoma Olumba & Ikenna Chris-Okoro & Konyegwachie Chuckwuma & Tien-Chien Jen & Oluseyi Oladijo & Esther Akinlabi, 2022. "Overview of Solar–Wind Hybrid Products: Prominent Challenges and Possible Solutions," Energies, MDPI, vol. 15(16), pages 1-25, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:203:y:2023:i:c:p:828-840. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.