IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v123y2018icp273-280.html
   My bibliography  Save this article

Friction loss and energy recovery of a Pelton turbine for different spear positions

Author

Listed:
  • Jeon, Heungsu
  • Park, Joo Hoon
  • Shin, Youhwan
  • Choi, Minsuk

Abstract

This study is dedicated to find a cause of a critical flow rate in a Pelton turbine operating with a constant runner speed, below which the efficiency of the turbine decreases significantly. A critical flow rate was initially found in the performance test of the Pelton turbine for extracting energy from a PRO (pressure retarded osmosis) pilot plant. For higher flow rates than a critical value, the efficiency of the Pelton turbine was nearly constant independent of flow rates. For lower flow rates than a critical value, however, the efficiency drops with decreasing flow rates. 3D flow simulations were conducted at three different flow rates to investigate effects of flow rates on the performance of the Pelton turbine. It was found in the numerical results that a large friction loss is generated in an injector if the spear is closed too tightly for a low flow rate below a critical value. Head loss coefficients of the injector for three different spear positions were calculated and it was found that the loss is doubled below a critical flow rate. This implies that it is important to include the geometry of an injector and spear in the numerical simulations for Pelton turbines.

Suggested Citation

  • Jeon, Heungsu & Park, Joo Hoon & Shin, Youhwan & Choi, Minsuk, 2018. "Friction loss and energy recovery of a Pelton turbine for different spear positions," Renewable Energy, Elsevier, vol. 123(C), pages 273-280.
    • Handle: RePEc:eee:renene:v:123:y:2018:i:c:p:273-280
    DOI: 10.1016/j.renene.2018.02.038
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148118301782
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2018.02.038?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gupta, Vishal & Prasad, Vishnu & Khare, Ruchi, 2016. "Numerical simulation of six jet Pelton turbine model," Energy, Elsevier, vol. 104(C), pages 24-32.
    2. Židonis, Audrius & Aggidis, George A., 2015. "State of the art in numerical modelling of Pelton turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 135-144.
    3. Aggidis, George A. & Židonis, Audrius, 2014. "Hydro turbine prototype testing and generation of performance curves: Fully automated approach," Renewable Energy, Elsevier, vol. 71(C), pages 433-441.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yu, Zhi-Feng & Wang, Wen-Quan & Yan, Yan & Liu, Xing-Shun, 2021. "Energy loss evaluation in a Francis turbine under overall operating conditions using entropy production method," Renewable Energy, Elsevier, vol. 169(C), pages 982-999.
    2. Jung, In Hyuk & Kim, Young Soo & Shin, Dong Ho & Chung, Jin Taek & Shin, Youhwan, 2019. "Influence of spear needle eccentricity on jet quality in micro Pelton turbine for power generation," Energy, Elsevier, vol. 175(C), pages 58-65.
    3. Sani, Abdollah Eskandari, 2019. "Design and synchronizing of Pelton turbine with centrifugal pump in RO package," Energy, Elsevier, vol. 172(C), pages 787-793.
    4. Sengpanich, K. & Bohez, Erik L.J. & Thongkruer, P. & Sakulphan, K., 2019. "New mode to operate centrifugal pump as impulse turbine," Renewable Energy, Elsevier, vol. 140(C), pages 983-993.
    5. Rossi, Mosè & Spedaletti, Samuele & Lorenzetti, Matteo & Salvi, Danilo & Renzi, Massimiliano & Comodi, Gabriele & Caresana, Flavio & Pelagalli, Leonardo, 2021. "A methodology to estimate average flow rates in Water Supply Systems (WSSs) for energy recovery purposes through hydropower solutions," Renewable Energy, Elsevier, vol. 180(C), pages 1101-1113.
    6. Jose Erazo & Guillermo Barragan & Modesto Pérez-Sánchez & Clotario Tapia & Marco Calahorrano & Victor Hidalgo, 2022. "Geometrical Optimization of Pelton Turbine Buckets for Enhancing Overall Efficiency by Using a Parametric Model—A Case Study: Hydroelectric Power Plant “Illuchi N2” from Ecuador," Energies, MDPI, vol. 15(23), pages 1-18, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Židonis, Audrius & Benzon, David S. & Aggidis, George A., 2015. "Development of hydro impulse turbines and new opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1624-1635.
    2. Jung, In Hyuk & Kim, Young Soo & Shin, Dong Ho & Chung, Jin Taek & Shin, Youhwan, 2019. "Influence of spear needle eccentricity on jet quality in micro Pelton turbine for power generation," Energy, Elsevier, vol. 175(C), pages 58-65.
    3. Chitrakar, Sailesh & Solemslie, Bjørn Winther & Neopane, Hari Prasad & Dahlhaug, Ole Gunnar, 2020. "Review on numerical techniques applied in impulse hydro turbines," Renewable Energy, Elsevier, vol. 159(C), pages 843-859.
    4. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Liang, Quanwei & Liu, Jie, 2021. "Analysis of the air-water-sediment flow behavior in Pelton buckets using a Eulerian-Lagrangian approach," Energy, Elsevier, vol. 218(C).
    5. Deyou, Li & Hongjie, Wang & Gaoming, Xiang & Ruzhi, Gong & Xianzhu, Wei & Zhansheng, Liu, 2015. "Unsteady simulation and analysis for hump characteristics of a pump turbine model," Renewable Energy, Elsevier, vol. 77(C), pages 32-42.
    6. Ge, Xinfeng & Sun, Jie & Zhou, Ye & Cai, Jianguo & Zhang, Hui & Zhang, Lei & Ding, Mingquan & Deng, Chaozhong & Binama, Maxime & Zheng, Yuan, 2021. "Experimental and Numerical studies on Opening and Velocity Influence on Sediment Erosion of Pelton Turbine Buckets," Renewable Energy, Elsevier, vol. 173(C), pages 1040-1056.
    7. Schillinger, Moritz & Weigt, Hannes & Barry, Michael & Schumann, René, 2017. "Hydropower Operation in a Changing Market Environment A Swiss Case Study," Working papers 2017/19, Faculty of Business and Economics - University of Basel.
    8. Liu, Dong & Wang, Xin & Peng, Yunshui & Zhang, Hui & Xiao, Zhihuai & Han, Xiangdong & Malik, O.P., 2020. "Stability analysis of hydropower units under full operating conditions considering turbine nonlinearity," Renewable Energy, Elsevier, vol. 154(C), pages 723-742.
    9. Yang, Weijia & Norrlund, Per & Chung, Chi Yung & Yang, Jiandong & Lundin, Urban, 2018. "Eigen-analysis of hydraulic-mechanical-electrical coupling mechanism for small signal stability of hydropower plant," Renewable Energy, Elsevier, vol. 115(C), pages 1014-1025.
    10. Xiao, Yexiang & Guo, Bao & Rai, Anant Kumar & Liu, Jie & Liang, Quanwei & Zhang, Jin, 2022. "Analysis of hydro-abrasive erosion in Pelton buckets using a Eulerian-Lagrangian approach," Renewable Energy, Elsevier, vol. 197(C), pages 472-485.
    11. Cheng, Qian & Ming, Bo & Liu, Pan & Huang, Kangdi & Gong, Yu & Li, Xiao & Zheng, Yalian, 2021. "Solving hydro unit commitment problems with multiple hydraulic heads based on a two-layer nested optimization method," Renewable Energy, Elsevier, vol. 172(C), pages 317-326.
    12. Bilgili, Mehmet & Bilirgen, Harun & Ozbek, Arif & Ekinci, Firat & Demirdelen, Tugce, 2018. "The role of hydropower installations for sustainable energy development in Turkey and the world," Renewable Energy, Elsevier, vol. 126(C), pages 755-764.
    13. Kim, Joon-Hyung & Cho, Bo-Min & Kim, Sung & Kim, Jin-Woo & Suh, Jun-Won & Choi, Young-Seok & Kanemoto, Toshiaki & Kim, Jin-Hyuk, 2017. "Design technique to improve the energy efficiency of a counter-rotating type pump-turbine," Renewable Energy, Elsevier, vol. 101(C), pages 647-659.
    14. Rai, Anant Kumar & Kumar, Arun & Staubli, Thomas & Yexiang, Xiao, 2020. "Interpretation and application of the hydro-abrasive erosion model from IEC 62364 (2013) for Pelton turbines," Renewable Energy, Elsevier, vol. 160(C), pages 396-408.
    15. Alimirzazadeh, Siamak & Kumashiro, Takashi & Leguizamón, Sebastián & Jahanbakhsh, Ebrahim & Maertens, Audrey & Vessaz, Christian & Tani, Kiyohito & Avellan, François, 2020. "GPU-accelerated numerical analysis of jet interference in a six-jet Pelton turbine using Finite Volume Particle Method," Renewable Energy, Elsevier, vol. 148(C), pages 234-246.
    16. Martinez, Jayson J. & Deng, Zhiqun Daniel & Mueller, Robert & Titzler, Scott, 2020. "In situ characterization of the biological performance of a Francis turbine retrofitted with a modular guide vane," Applied Energy, Elsevier, vol. 276(C).
    17. Kramer, Matthias & Terheiden, Kristina & Wieprecht, Silke, 2015. "Optimized design of impulse turbines in the micro-hydro sector concerning air detrainment processes," Energy, Elsevier, vol. 93(P2), pages 2604-2613.
    18. Emanuele Quaranta & Manuel Bonjean & Damiano Cuvato & Christophe Nicolet & Matthieu Dreyer & Anthony Gaspoz & Samuel Rey-Mermet & Bruno Boulicaut & Luigi Pratalata & Marco Pinelli & Giuseppe Tomaselli, 2020. "Hydropower Case Study Collection: Innovative Low Head and Ecologically Improved Turbines, Hydropower in Existing Infrastructures, Hydropeaking Reduction, Digitalization and Governing Systems," Sustainability, MDPI, vol. 12(21), pages 1-78, October.
    19. Ni, Dan & Zhang, Ning & Gao, Bo & Li, Zhong & Yang, Minguan, 2020. "Dynamic measurements on unsteady pressure pulsations and flow distributions in a nuclear reactor coolant pump," Energy, Elsevier, vol. 198(C).
    20. Zaher Mundher Yaseen & Ameen Mohammed Salih Ameen & Mohammed Suleman Aldlemy & Mumtaz Ali & Haitham Abdulmohsin Afan & Senlin Zhu & Ahmed Mohammed Sami Al-Janabi & Nadhir Al-Ansari & Tiyasha Tiyasha &, 2020. "State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations," Sustainability, MDPI, vol. 12(4), pages 1-40, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:123:y:2018:i:c:p:273-280. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.