IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v197y2020ics0951832019303448.html
   My bibliography  Save this article

A stochastic simulation-optimization model for base-warranty and extended-warranty decision-making of under- and out-of-warranty products

Author

Listed:
  • Afsahi, Mohsen
  • Shafiee, Mahmood

Abstract

In recent years, product warranties (including base-warranty and extended-warranty) have become an integral part of marketing strategy for most manufacturers as well as and a key determinant of purchasing decision for most customers. It is crucial for manufacturers or dealers who offer warranty to their customers to optimize decisions regarding price of products, durations of base-warranty and extended-warranty, price of extended-warranty, etc. On the other side, manufacturers must decide on a cost-effective imperfect maintenance strategy and spare part inventory policy for their under-warranty and out-of-warranty products. In order to solve these decision-making problems, this study proposes a novel stochastic simulation-based optimization (SBO) model with the objective of maximizing the manufacturer's profit. A metaheuristic Monte-Carlo simulation algorithm integrated with a dynamic programming approach is also presented to solve the model. A case study of vacuum cleaners is provided to illustrate the developed model and its solution procedure, and the simulation results are verified with real data. Finally, a sensitivity analysis is performed in order to evaluate the impact of key parameters on the optimal solution. Our analysis shows how different planning horizons can affect warranty-related decisions for both the manufacturers and customers, providing valuable insights to corporate decision-makers.

Suggested Citation

  • Afsahi, Mohsen & Shafiee, Mahmood, 2020. "A stochastic simulation-optimization model for base-warranty and extended-warranty decision-making of under- and out-of-warranty products," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
  • Handle: RePEc:eee:reensy:v:197:y:2020:i:c:s0951832019303448
    DOI: 10.1016/j.ress.2019.106772
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832019303448
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ress.2019.106772?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhou, Zhefang & Li, Yanjun & Tang, Kwei, 2009. "Dynamic pricing and warranty policies for products with fixed lifetime," European Journal of Operational Research, Elsevier, vol. 196(3), pages 940-948, August.
    2. Zhao, Xiujie & He, Shuguang & Xie, Min, 2018. "Utilizing experimental degradation data for warranty cost optimization under imperfect repair," Reliability Engineering and System Safety, Elsevier, vol. 177(C), pages 108-119.
    3. Yun, Won Young & Murthy, D.N.P. & Jack, N., 2008. "Warranty servicing with imperfect repair," International Journal of Production Economics, Elsevier, vol. 111(1), pages 159-169, January.
    4. Lam, Yeh & Kwok Wai Lam, Peggo, 2001. "An extended warranty policy with options open to consumers," European Journal of Operational Research, Elsevier, vol. 131(3), pages 514-529, June.
    5. Kunpeng Li & Suman Mallik & Dilip Chhajed, 2012. "Design of Extended Warranties in Supply Chains under Additive Demand," Production and Operations Management, Production and Operations Management Society, vol. 21(4), pages 730-746, July.
    6. Theodore S. Glickman & Paul D. Berger, 1976. "Optimal Price and Protection Period Decisions for a Product Under Warranty," Management Science, INFORMS, vol. 22(12), pages 1381-1390, August.
    7. Bouguerra, Soumaya & Chelbi, Anis & Rezg, Nidhal, 2012. "A decision model for adopting an extended warranty under different maintenance policies," International Journal of Production Economics, Elsevier, vol. 135(2), pages 840-849.
    8. Kim, Bowon & Park, Sangsun, 2008. "Optimal pricing, EOL (end of life) warranty, and spare parts manufacturing strategy amid product transition," European Journal of Operational Research, Elsevier, vol. 188(3), pages 723-745, August.
    9. Chen, Xu & Li, Ling & Zhou, Ming, 2012. "Manufacturer's pricing strategy for supply chain with warranty period-dependent demand," Omega, Elsevier, vol. 40(6), pages 807-816.
    10. Mahmood Shafiee & Stefanka Chukova, 2013. "Optimal upgrade strategy, warranty policy and sale price for second‐hand products," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 29(2), pages 157-169, March.
    11. Charnes, A. & Cooper, W. W. & Rhodes, E., 1978. "Measuring the efficiency of decision making units," European Journal of Operational Research, Elsevier, vol. 2(6), pages 429-444, November.
    12. Chun-Wu Yeh & Chih-Chiang Fang, 2015. "Optimal decision for warranty with consideration of marketing and production capacity," International Journal of Production Research, Taylor & Francis Journals, vol. 53(18), pages 5456-5471, September.
    13. Gwo-Liang Liao, 2016. "Optimal economic production quantity policy for a parallel system with repair, rework, free-repair warranty and maintenance," International Journal of Production Research, Taylor & Francis Journals, vol. 54(20), pages 6265-6280, October.
    14. Joseph C. Hartman & Kamonkan Laksana, 2009. "Designing and pricing menus of extended warranty contracts," Naval Research Logistics (NRL), John Wiley & Sons, vol. 56(3), pages 199-214, April.
    15. Wei Huang & Vidyadhar Kulkarni & Jayashankar M. Swaminathan, 2008. "Managing the Inventory of an Item with a Replacement Warranty," Management Science, INFORMS, vol. 54(8), pages 1441-1452, August.
    16. Masaaki Kijima & Toshio Nakagawa, 1991. "A cumulative damage shock model with imperfect preventive maintenance," Naval Research Logistics (NRL), John Wiley & Sons, vol. 38(2), pages 145-156, April.
    17. Shafiee, Mahmood & Chukova, Stefanka, 2013. "Maintenance models in warranty: A literature review," European Journal of Operational Research, Elsevier, vol. 229(3), pages 561-572.
    18. Wang, Chih-Hsiung & Sheu, Shey-Heui, 2003. "Optimal lot sizing for products sold under free-repair warranty," European Journal of Operational Research, Elsevier, vol. 149(1), pages 131-141, August.
    19. Wu, Chin-Chun & Chou, Chao-Yu & Huang, Chikong, 2009. "Optimal price, warranty length and production rate for free replacement policy in the static demand market," Omega, Elsevier, vol. 37(1), pages 29-39, February.
    20. Wu, Shaomin & Longhurst, Phil, 2011. "Optimising age-replacement and extended non-renewing warranty policies in lifecycle costing," International Journal of Production Economics, Elsevier, vol. 130(2), pages 262-267, April.
    21. Chien, Yu-Hung & Zhang, Zhe George & Yin, Xiaoling, 2019. "On optimal preventive-maintenance policy for generalized Polya process repairable products under free-repair warranty," European Journal of Operational Research, Elsevier, vol. 279(1), pages 68-78.
    22. Lei, Yong & Liu, Qian & Shum, Stephen, 2017. "Warranty pricing with consumer learning," European Journal of Operational Research, Elsevier, vol. 263(2), pages 596-610.
    23. Yu-Chung Tsao & Wei-Guang Teng & Ruey-Shii Chen & Wang-Ying Chou, 2014. "Pricing and inventory policies for Hi-tech products under replacement warranty," International Journal of Systems Science, Taylor & Francis Journals, vol. 45(6), pages 1255-1267, June.
    24. John Khawam & Warren H. Hausman & Dinah W. Cheng, 2007. "Warranty Inventory Optimization for Hitachi Global Storage Technologies, Inc," Interfaces, INFORMS, vol. 37(5), pages 455-471, October.
    25. Wu, Chin-Chun & Lin, Pei-Chun & Chou, Chao-Yu, 2006. "Determination of price and warranty length for a normal lifetime distributed product," International Journal of Production Economics, Elsevier, vol. 102(1), pages 95-107, July.
    26. Seyed Ahmad Yazdian & Kamran Shahanaghi & Ahmad Makui, 2016. "Joint optimisation of price, warranty and recovery planning in remanufacturing of used products under linear and non-linear demand, return and cost functions," International Journal of Systems Science, Taylor & Francis Journals, vol. 47(5), pages 1155-1175, April.
    27. Chien, Yu-Hung, 2019. "The optimal preventive-maintenance policy for a NHPBP repairable system under free-repair warranty," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 444-453.
    28. Chukova, S. & Arnold, R. & Wang, Dong Q., 2004. "Warranty analysis: An approach to modeling imperfect repairs," International Journal of Production Economics, Elsevier, vol. 89(1), pages 57-68, May.
    29. N Jack & D N P Murthy, 2007. "A flexible extended warranty and related optimal strategies," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(12), pages 1612-1620, December.
    30. Blischke, W. R. & Murthy, D. N. P., 1992. "Product warranty management -- I: A taxonomy for warranty policies," European Journal of Operational Research, Elsevier, vol. 62(2), pages 127-148, October.
    31. Bian, Yiwen & Xie, Jiazheng & Archibald, Thomas W. & Sun, Yanhong, 2019. "Optimal extended warranty strategy: Offering trade-in service or not?," European Journal of Operational Research, Elsevier, vol. 278(1), pages 240-254.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lizhen Zhan & Hui Shu & Xideng Zhou & Xiaowei Lin, 2022. "A Quality Decision Model Considering the Delay Effects in a Dual-Channel Supply Chain," Sustainability, MDPI, vol. 14(10), pages 1-25, May.
    2. Gupta, Sanjib Kumar & Bhattacharya, Debasis, 2022. "Non-parametric estimation of bivariate reliability from incomplete two-dimensional warranty data," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    3. Hooti, Fatemeh & Ahmadi, Jafar & Longobardi, Maria, 2020. "Optimal extended warranty length with limited number of repairs in the warranty period," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    4. Wang, Dongfan & He, Zhen & He, Shuguang & Zhang, Zhaomin & Zhang, Yiwen, 2021. "Dynamic pricing of two-dimensional extended warranty considering the impacts of product price fluctuations and repair learning," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    5. Huang, Hongfu & Liu, Feng & Zhang, Peng, 2021. "To outsource or not to outsource? Warranty service provision strategies considering competition, costs and reliability," International Journal of Production Economics, Elsevier, vol. 242(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lianmin Zhang & Lei Guan & Daniel Zhuoyu Long & Houcai Shen & Huajun Tang, 2023. "Who is better off by selling extended warranties in the supply chain: the manufacturer, the retailer, or both?," Annals of Operations Research, Springer, vol. 328(2), pages 1557-1583, September.
    2. Kirkizoğlu, Zeynep & Karaer, Özgen, 2022. "After-sales service and warranty decisions of a durable goods manufacturer," Omega, Elsevier, vol. 113(C).
    3. Wang, Dongfan & He, Zhen & He, Shuguang & Zhang, Zhaomin & Zhang, Yiwen, 2021. "Dynamic pricing of two-dimensional extended warranty considering the impacts of product price fluctuations and repair learning," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    4. Bian, Yiwen & Xie, Jiazheng & Archibald, Thomas W. & Sun, Yanhong, 2019. "Optimal extended warranty strategy: Offering trade-in service or not?," European Journal of Operational Research, Elsevier, vol. 278(1), pages 240-254.
    5. Huang, Yeu-Shiang & Fang, Chih-Chiang & Lu, Chang-Ming & (Bill) Tseng, Tzu-Liang, 2022. "Optimal Warranty Policy for Consumer Electronics with Dependent Competing Failure Processes," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    6. Rezapour, Shabnam & Allen, Janet K. & Mistree, Farrokh, 2016. "Reliable flow in forward and after-sales supply chains considering propagated uncertainty," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 93(C), pages 409-436.
    7. Luo, Ming & Wu, Shaomin, 2019. "A comprehensive analysis of warranty claims and optimal policies," European Journal of Operational Research, Elsevier, vol. 276(1), pages 144-159.
    8. Darghouth, M.N. & Ait-kadi, D. & Chelbi, A., 2017. "Joint optimization of design, warranty and price for products sold with maintenance service contracts," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 197-208.
    9. Wang, Yukun & Liu, Zixian & Liu, Yiliu, 2015. "Optimal preventive maintenance strategy for repairable items under two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 142(C), pages 326-333.
    10. Safaei, Fatemeh & Taghipour, Sharareh, 2022. "Optimal preventive maintenance for repairable products with three types of failures sold under a renewable hybrid FRW/PRW policy," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    11. Zhang, Zhichao & Xu, Haiyan & Zhao, Yingxue & Liu, Zhi & Chen, Kebing, 2023. "Extended warranty service provision: A strategic analysis for the E-commerce platform supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 177(C).
    12. Wang, Xiaolin & Zhao, Xiujie & Liu, Bin, 2020. "Design and pricing of extended warranty menus based on the multinomial logit choice model," European Journal of Operational Research, Elsevier, vol. 287(1), pages 237-250.
    13. Chen, Cheng-Kang & Lo, Chih-Chung & Weng, Tzu-Chun, 2017. "Optimal production run length and warranty period for an imperfect production system under selling price dependent on warranty period," European Journal of Operational Research, Elsevier, vol. 259(2), pages 401-412.
    14. Prashant M. Ambad & Makarand S. Kulkarni, 2017. "A goal programming approach for multi-objective warranty optimization," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(4), pages 842-861, December.
    15. Wang, Jinting & Zhou, Zhuang & Peng, Hao, 2017. "Flexible decision models for a two-dimensional warranty policy with periodic preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 162(C), pages 14-27.
    16. Xiaodong Zhu & Lingfei Yu, 2019. "The Impact of Warranty Efficiency of Remanufactured Products on Production Decisions and Green Growth Performance in Closed-Loop Supply Chain: Perspective of Consumer Behavior," Sustainability, MDPI, vol. 11(5), pages 1-24, March.
    17. Luo, Ming & Wu, Shaomin, 2018. "A mean-variance optimisation approach to collectively pricing warranty policies," International Journal of Production Economics, Elsevier, vol. 196(C), pages 101-112.
    18. Kaiying Cao & Yunyi Su & Guoxin Han & Jia Wang, 2023. "Optimal maintenance service outsourcing strategy considering extended warranty service," Managerial and Decision Economics, John Wiley & Sons, Ltd., vol. 44(2), pages 1344-1358, March.
    19. Zhao, Xiujie & Liu, Bin & Xu, Jianyu & Wang, Xiao-Lin, 2023. "Imperfect maintenance policies for warranted products under stochastic performance degradation," European Journal of Operational Research, Elsevier, vol. 308(1), pages 150-165.
    20. Shafiee, Mahmood & Chukova, Stefanka, 2013. "Maintenance models in warranty: A literature review," European Journal of Operational Research, Elsevier, vol. 229(3), pages 561-572.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:197:y:2020:i:c:s0951832019303448. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.