IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v203y2020ics0951832020306128.html
   My bibliography  Save this article

Optimal extended warranty length with limited number of repairs in the warranty period

Author

Listed:
  • Hooti, Fatemeh
  • Ahmadi, Jafar
  • Longobardi, Maria

Abstract

A policy plan is proposed for the warranty length of a repairable system which consists of a number of minimal repairs and duration of service. For this purpose, two total expected costs of the manufacturer are considered as the objective of the optimization model and the conditions for finding unique optimal solutions are investigated. To illustrate the performance of the theoretical results, numerical computations and graphical analysis are given when the lifetime of the original system follows an exponential distribution or a Weibull distribution. Finally, a real data set corresponds to the time between failures of a compressor is used to demonstrate the results.

Suggested Citation

  • Hooti, Fatemeh & Ahmadi, Jafar & Longobardi, Maria, 2020. "Optimal extended warranty length with limited number of repairs in the warranty period," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    • Handle: RePEc:eee:reensy:v:203:y:2020:i:c:s0951832020306128
    DOI: 10.1016/j.ress.2020.107111
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832020306128
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2020.107111?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Su, Chun & Wang, Xiaolin, 2016. "A two-stage preventive maintenance optimization model incorporating two-dimensional extended warranty," Reliability Engineering and System Safety, Elsevier, vol. 155(C), pages 169-178.
    2. Richard Barlow & Larry Hunter, 1960. "Optimum Preventive Maintenance Policies," Operations Research, INFORMS, vol. 8(1), pages 90-100, February.
    3. Chattopadhyay, Gopinath & Rahman, Anisur, 2008. "Development of lifetime warranty policies and models for estimating costs," Reliability Engineering and System Safety, Elsevier, vol. 93(4), pages 522-529.
    4. Wang, Yukun & Liu, Yiliu & Li, Xiaopeng & Chen, Junyan, 2019. "Multi-phase reliability growth test planning for repairable products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 315-326.
    5. Zhu, Xiaoyan & Jiao, Can & Yuan, Tao, 2019. "Optimal decisions on product reliability, sales and promotion under nonrenewable warranties," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    6. Castro, I.T. & Sanjuan, E.L., 2008. "An optimal repair policy for systems with a limited number of repairs," European Journal of Operational Research, Elsevier, vol. 187(1), pages 84-97, May.
    7. Park, Minjae & Jung, Ki Mun & Park, Dong Ho, 2020. "Warranty cost analysis for second-hand products under a two-stage repair-or-full refund policy," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    8. Darghouth, M.N. & Ait-kadi, D. & Chelbi, A., 2017. "Joint optimization of design, warranty and price for products sold with maintenance service contracts," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 197-208.
    9. Cha, Ji Hwan & Finkelstein, Maxim, 2014. "Some notes on unobserved parameters (frailties) in reliability modeling," Reliability Engineering and System Safety, Elsevier, vol. 123(C), pages 99-103.
    10. Nakagawa, Toshio & Kowada, Masashi, 1983. "Analysis of a system with minimal repair and its application to replacement policy," European Journal of Operational Research, Elsevier, vol. 12(2), pages 176-182, February.
    11. Wang, Jinting & Zhou, Zhuang & Peng, Hao, 2017. "Flexible decision models for a two-dimensional warranty policy with periodic preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 162(C), pages 14-27.
    12. Lam, Yeh & Kwok Wai Lam, Peggo, 2001. "An extended warranty policy with options open to consumers," European Journal of Operational Research, Elsevier, vol. 131(3), pages 514-529, June.
    13. Park, Minjae & Jung, Ki Mun & Park, Dong Ho, 2018. "Optimization of periodic preventive maintenance policy following the expiration of two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 170(C), pages 1-9.
    14. Ye, Zhi-Sheng & Murthy, D.N. Pra, 2016. "Warranty menu design for a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 155(C), pages 21-29.
    15. Badía, F.G. & Berrade, M.D. & Lee, Hyunju, 2020. "An study of cost effective maintenance policies: Age replacement versus replacement after N minimal repairs," Reliability Engineering and System Safety, Elsevier, vol. 201(C).
    16. Wu, Chin-Chun & Chou, Chao-Yu & Huang, Chikong, 2009. "Optimal price, warranty length and production rate for free replacement policy in the static demand market," Omega, Elsevier, vol. 37(1), pages 29-39, February.
    17. Soumaya Ghnimi & Soufiane Gasmi & Arwa Nasr, 2017. "Reliability parameters estimation for parallel systems under imperfect repair," Metrika: International Journal for Theoretical and Applied Statistics, Springer, vol. 80(3), pages 273-288, April.
    18. Zequeira, R.I. & Bérenguer, C., 2006. "Periodic imperfect preventive maintenance with two categories of competing failure modes," Reliability Engineering and System Safety, Elsevier, vol. 91(4), pages 460-468.
    19. Yeo, Wee Meng & Yuan, Xue-Ming, 2009. "Optimal warranty policies for systems with imperfect repair," European Journal of Operational Research, Elsevier, vol. 199(1), pages 187-197, November.
    20. Afsahi, Mohsen & Shafiee, Mahmood, 2020. "A stochastic simulation-optimization model for base-warranty and extended-warranty decision-making of under- and out-of-warranty products," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhu, Ying & Xia, Tangbin & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2022. "Optimal maintenance service strategy for OEM entering competitive MRO market under opposite patterns," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    2. Yongjun Du & Lijun Shang & Qingan Qiu & Li Yang, 2022. "Optimum Post-Warranty Maintenance Policies for Products with Random Working Cycles," Mathematics, MDPI, vol. 10(10), pages 1-16, May.
    3. Jiang, Renyan & Qi, Faqun & Cao, Yu, 2023. "Relation between aging intensity function and WPP plot and its application in reliability modelling," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    4. Liu, Peng & Wang, Guanjun, 2023. "Generalized non-renewing replacement warranty policy and an age-based post-warranty maintenance strategy," European Journal of Operational Research, Elsevier, vol. 311(2), pages 567-580.
    5. Huang, Yeu-Shiang & Fang, Chih-Chiang & Lu, Chang-Ming & (Bill) Tseng, Tzu-Liang, 2022. "Optimal Warranty Policy for Consumer Electronics with Dependent Competing Failure Processes," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    6. Zhu, Ying & Xia, Tangbin & Hong, Ge & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2022. "Collaborative maintenance service and component sales under coopetition patterns for OEMs challenged by booming used-component sales," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    7. Lijun Shang & Xiguang Yu & Liying Wang & Yongjun Du, 2022. "Design of Random Warranty and Maintenance Policy: From a Perspective of the Life Cycle," Mathematics, MDPI, vol. 10(20), pages 1-22, October.
    8. Liu, Peng & Wang, Guanjun & Su, Peng, 2021. "Optimal maintenance strategies for warranty products with limited repair time and limited repair number," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    9. Ram Niwas & M. S. Kadyan, 2022. "A bi-objective inspection policy for a repairable engineering system with failure free warranty," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(2), pages 881-891, April.
    10. Shang, Lijun & Liu, Baoliang & Qiu, Qingan & Yang, Li & Du, Yongjun, 2023. "Designing warranty and maintenance policies for products subject to random working cycles," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    11. Lijun Shang & Yongjun Du & Cang Wu & Chengye Ma, 2022. "A Bivariate Optimal Random Replacement Model for the Warranted Product with Job Cycles," Mathematics, MDPI, vol. 10(13), pages 1-16, June.
    12. Lijun Shang & Guojun Shang & Yongjun Du & Qingan Qiu & Li Yang & Qinglai Dong, 2022. "Post-Warranty Replacement Models for the Product under a Hybrid Warranty," Mathematics, MDPI, vol. 10(10), pages 1-18, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Dongfan & He, Zhen & He, Shuguang & Zhang, Zhaomin & Zhang, Yiwen, 2021. "Dynamic pricing of two-dimensional extended warranty considering the impacts of product price fluctuations and repair learning," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    2. Wang, Yukun & Liu, Yiliu & Liu, Zixian & Li, Xiaopeng, 2017. "On reliability improvement program for second-hand products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 452-463.
    3. Zhao, Xiujie & Liu, Bin & Xu, Jianyu & Wang, Xiao-Lin, 2023. "Imperfect maintenance policies for warranted products under stochastic performance degradation," European Journal of Operational Research, Elsevier, vol. 308(1), pages 150-165.
    4. Wang, Xiaolin & Zhao, Xiujie & Liu, Bin, 2020. "Design and pricing of extended warranty menus based on the multinomial logit choice model," European Journal of Operational Research, Elsevier, vol. 287(1), pages 237-250.
    5. Lijun Shang & Yongjun Du & Cang Wu & Chengye Ma, 2022. "A Bivariate Optimal Random Replacement Model for the Warranted Product with Job Cycles," Mathematics, MDPI, vol. 10(13), pages 1-16, June.
    6. Liu, Peng & Wang, Guanjun & Su, Peng, 2021. "Optimal maintenance strategies for warranty products with limited repair time and limited repair number," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    7. Lijun Shang & Guojun Shang & Yongjun Du & Qingan Qiu & Li Yang & Qinglai Dong, 2022. "Post-Warranty Replacement Models for the Product under a Hybrid Warranty," Mathematics, MDPI, vol. 10(10), pages 1-18, May.
    8. Wang, Xiaolin & Li, Lishuai & Xie, Min, 2020. "An unpunctual preventive maintenance policy under two-dimensional warranty," European Journal of Operational Research, Elsevier, vol. 282(1), pages 304-318.
    9. Zhu, Xiaoyan & Jiao, Can & Yuan, Tao, 2019. "Optimal decisions on product reliability, sales and promotion under nonrenewable warranties," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    10. Gupta, Sanjib Kumar & Bhattacharya, Debasis, 2022. "Non-parametric estimation of bivariate reliability from incomplete two-dimensional warranty data," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    11. Liu, Peng & Wang, Guanjun, 2022. "Minimal repair models with non-negligible repair time," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    12. Shang, Lijun & Liu, Baoliang & Qiu, Qingan & Yang, Li & Du, Yongjun, 2023. "Designing warranty and maintenance policies for products subject to random working cycles," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    13. Peng, Shizhe & Jiang, Wei & Wei, Lai & Wang, Xiao-Lin, 2022. "A new cost-sharing preventive maintenance program under two-dimensional warranty," International Journal of Production Economics, Elsevier, vol. 254(C).
    14. Yongjun Du & Lijun Shang & Qingan Qiu & Li Yang, 2022. "Optimum Post-Warranty Maintenance Policies for Products with Random Working Cycles," Mathematics, MDPI, vol. 10(10), pages 1-16, May.
    15. Wang, Yukun & Liu, Yiliu & Li, Xiaopeng & Chen, Junyan, 2019. "Multi-phase reliability growth test planning for repairable products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 315-326.
    16. Yukun Wang & Yiliu Liu & Aibo Zhang, 2019. "Preventive maintenance optimization for repairable products considering two-dimensional warranty and customer satisfaction," Journal of Risk and Reliability, , vol. 233(4), pages 553-566, August.
    17. Yiying Zhang & Peng Zhao, 2019. "Optimal allocation of minimal repairs in parallel and series systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 66(6), pages 517-526, September.
    18. Xiaolin Wang & Wei Xie, 2018. "Two-dimensional warranty: A literature review," Journal of Risk and Reliability, , vol. 232(3), pages 284-307, June.
    19. Lijun Shang & Guojun Shang & Qingan Qiu, 2022. "A Bivariate Post-Warranty Maintenance Model for the Product under a 2D Warranty," Mathematics, MDPI, vol. 10(12), pages 1-18, June.
    20. Rui Zheng & Chun Su & Yuqiao Zheng, 2020. "Two-stage flexible warranty decision-making considering downtime loss," Journal of Risk and Reliability, , vol. 234(3), pages 527-535, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:203:y:2020:i:c:s0951832020306128. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.