IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v138y2015icp273-283.html
   My bibliography  Save this article

Failure mechanism dependence and reliability evaluation of non-repairable system

Author

Listed:
  • Chen, Ying
  • Yang, Liu
  • Ye, Cui
  • Kang, Rui

Abstract

Reliability study of electronic system with the physics-of-failure method has been promoted due to the increase knowledge of electronic failure mechanisms. System failure initiates from independent failure mechanisms, have effect on or affect by other failure mechanisms and finally result in system failure. Failure mechanisms in a non-repairable system have many kinds of correlation. One failure mechanism developing to a certain degree will trigger, accelerate or inhibit another or many other failure mechanisms, some kind of failure mechanisms may have the same effect on the failure site, component or system. The destructive effect will be accumulated and result in early failure. This paper presents a reliability evaluation method considering correlativity among failure mechanisms, which includes trigger, acceleration, inhibition, accumulation, and competition. Based on fundamental rule of physics of failure, decoupling methods of these correlations are discussed. With a case, reliability of electronic system is evaluated considering failure mechanism dependence.

Suggested Citation

  • Chen, Ying & Yang, Liu & Ye, Cui & Kang, Rui, 2015. "Failure mechanism dependence and reliability evaluation of non-repairable system," Reliability Engineering and System Safety, Elsevier, vol. 138(C), pages 273-283.
    • Handle: RePEc:eee:reensy:v:138:y:2015:i:c:p:273-283
    DOI: 10.1016/j.ress.2015.02.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832015000472
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2015.02.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xing, Liudong & Shrestha, Akhilesh & Dai, Yuanshun, 2011. "Exact combinatorial reliability analysis of dynamic systems with sequence-dependent failures," Reliability Engineering and System Safety, Elsevier, vol. 96(10), pages 1375-1385.
    2. Wang, Chaonan & Xing, Liudong & Levitin, Gregory, 2013. "Reliability analysis of multi-trigger binary systems subject to competing failures," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 9-17.
    3. Levitin, Gregory & Xing, Liudong, 2010. "Reliability and performance of multi-state systems with propagated failures having selective effect," Reliability Engineering and System Safety, Elsevier, vol. 95(6), pages 655-661.
    4. Wang, Chaonan & Xing, Liudong & Levitin, Gregory, 2012. "Propagated failure analysis for non-repairable systems considering both global and selective effects," Reliability Engineering and System Safety, Elsevier, vol. 99(C), pages 96-104.
    5. Keedy, Elias & Feng, Qianmei, 2012. "A physics-of-failure based reliability and maintenance modeling framework for stent deployment and operation," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 94-101.
    6. Nagy, Tibor & Turányi, Tamás, 2012. "Determination of the uncertainty domain of the Arrhenius parameters needed for the investigation of combustion kinetic models," Reliability Engineering and System Safety, Elsevier, vol. 107(C), pages 29-34.
    7. Bocchetti, D. & Giorgio, M. & Guida, M. & Pulcini, G., 2009. "A competing risk model for the reliability of cylinder liners in marine Diesel engines," Reliability Engineering and System Safety, Elsevier, vol. 94(8), pages 1299-1307.
    8. Levitin, Gregory & Xing, Liudong & Ben-Haim, Hanoch & Dai, Yuanshun, 2011. "Multi-state systems with selective propagated failures and imperfect individual and group protections," Reliability Engineering and System Safety, Elsevier, vol. 96(12), pages 1657-1666.
    9. Ramirez-Marquez, Jose E. & Coit, David W., 2007. "Optimization of system reliability in the presence of common cause failures," Reliability Engineering and System Safety, Elsevier, vol. 92(10), pages 1421-1434.
    10. Wang, Chaonan & Xing, Liudong & Levitin, Gregory, 2012. "Competing failure analysis in phased-mission systems with functional dependence in one of phases," Reliability Engineering and System Safety, Elsevier, vol. 108(C), pages 90-99.
    11. Xing, Liudong & Levitin, Gregory, 2010. "Combinatorial analysis of systems with competing failures subject to failure isolation and propagation effects," Reliability Engineering and System Safety, Elsevier, vol. 95(11), pages 1210-1215.
    12. Chookah, M. & Nuhi, M. & Modarres, M., 2011. "A probabilistic physics-of-failure model for prognostic health management of structures subject to pitting and corrosion-fatigue," Reliability Engineering and System Safety, Elsevier, vol. 96(12), pages 1601-1610.
    13. Maaroufi, Ghofrane & Chelbi, Anis & Rezg, Nidhal, 2013. "Optimal selective renewal policy for systems subject to propagated failures with global effect and failure isolation phenomena," Reliability Engineering and System Safety, Elsevier, vol. 114(C), pages 61-70.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fang, Jiayue & Kang, Rui & Chen, Ying, 2021. "Reliability evaluation of non-repairable systems with failure mechanism trigger effect," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    2. Rychlik, Tomasz, 2017. "Evaluations of quantiles of system lifetime distributions," European Journal of Operational Research, Elsevier, vol. 256(3), pages 935-944.
    3. Mi, Jinhua & Beer, Michael & Li, Yan-Feng & Broggi, Matteo & Cheng, Yuhua, 2020. "Reliability and importance analysis of uncertain system with common cause failures based on survival signature," Reliability Engineering and System Safety, Elsevier, vol. 201(C).
    4. Zeng, Zhiguo & Barros, Anne & Coit, David, 2023. "Dependent failure behavior modeling for risk and reliability: A systematic and critical literature review," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    5. Tie Chen & Songlin Zheng & Jinzhi Feng, 2017. "Statistical dependency analysis of multiple competing failure causes of fuel cell engines," Journal of Risk and Reliability, , vol. 231(2), pages 83-90, April.
    6. Li, Ying Yi & Chen, Ying & Yuan, Zeng Hui & Tang, Ning & Kang, Rui, 2017. "Reliability analysis of multi-state systems subject to failure mechanism dependence based on a combination method," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 109-123.
    7. Chen, Ying & Li, YingYi & Kang, Rui & Ali, Mosleh, 2020. "Reliability analysis of PMS with failure mechanism accumulation rules and a hierarchical method," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
    8. Sun, Bo & Fan, Xuejun & van Driel, Willem & Cui, Chengqiang & Zhang, Guoqi, 2018. "A stochastic process based reliability prediction method for LED driver," Reliability Engineering and System Safety, Elsevier, vol. 178(C), pages 140-146.
    9. Zhao, Guilin & Xing, Liudong, 2023. "Reliability analysis of body sensor networks with correlated isolation groups," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    10. Jin, Yi & Zhang, Qingyuan & Chen, Yunxia & Lu, Zhendan & Zu, Tianpei, 2023. "Cascading failures modeling of electronic circuits with degradation using impedance network," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    11. Chen, Ying & Li, Shumin & Kang, Rui, 2021. "Epistemic uncertainty quantification via uncertainty theory in the reliability evaluation of a system with failure Trigger effect," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    12. Wenjie Dong & Sifeng Liu & Zhigeng Fang & Yingsai Cao & Ye Ding, 2019. "A model based on hidden graphic evaluation and review technique network to evaluate reliability and lifetime of multi-state systems," Journal of Risk and Reliability, , vol. 233(3), pages 369-378, June.
    13. Chen, Ying & Wang, Ze & Li, YingYi & Kang, Rui & Mosleh, Ali, 2018. "Reliability analysis of a cold-standby system considering the development stages and accumulations of failure mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 1-12.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Yujie & Xing, Liudong & Levitin, Gregory & Huang, Ning, 2018. "Probabilistic competing failure analysis in phased-mission systems," Reliability Engineering and System Safety, Elsevier, vol. 176(C), pages 37-51.
    2. Wang, Yujie & Xing, Liudong & Wang, Honggang & Levitin, Gregory, 2015. "Combinatorial analysis of body sensor networks subject to probabilistic competing failures," Reliability Engineering and System Safety, Elsevier, vol. 142(C), pages 388-398.
    3. Wang, Chaonan & Xing, Liudong & Peng, Rui & Pan, Zhusheng, 2017. "Competing failure analysis in phased-mission systems with multiple functional dependence groups," Reliability Engineering and System Safety, Elsevier, vol. 164(C), pages 24-33.
    4. Wang, Chaonan & Xing, Liudong & Levitin, Gregory, 2013. "Reliability analysis of multi-trigger binary systems subject to competing failures," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 9-17.
    5. Fang, Jiayue & Kang, Rui & Chen, Ying, 2021. "Reliability evaluation of non-repairable systems with failure mechanism trigger effect," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    6. Zhao, Guilin & Xing, Liudong, 2021. "Reliability analysis of body sensor networks subject to random isolation time," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    7. Zhao, Guilin & Xing, Liudong, 2020. "Reliability analysis of IoT systems with competitions from cascading probabilistic function dependence," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    8. Li, Ying Yi & Chen, Ying & Yuan, Zeng Hui & Tang, Ning & Kang, Rui, 2017. "Reliability analysis of multi-state systems subject to failure mechanism dependence based on a combination method," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 109-123.
    9. Liu, Yu & Liu, Qinzhen & Xie, Chaoyang & Wei, Fayuan, 2019. "Reliability assessment for multi-state systems with state transition dependency," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 276-288.
    10. Peng Su & Guanjun Wang, 2022. "Reliability analysis of network systems subject to probabilistic propagation failures and failure isolation effects," Journal of Risk and Reliability, , vol. 236(2), pages 290-306, April.
    11. Tang, Maochun & Xiahou, Tangfan & Liu, Yu, 2023. "Mission performance analysis of phased-mission systems with cross-phase competing failures," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    12. Peng, Rui & Mo, Huadong & Xie, Min & Levitin, Gregory, 2013. "Optimal structure of multi-state systems with multi-fault coverage," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 18-25.
    13. Levitin, Gregory & Xing, Liudong & Ben-Haim, Hanoch & Dai, Yuanshun, 2011. "Multi-state systems with selective propagated failures and imperfect individual and group protections," Reliability Engineering and System Safety, Elsevier, vol. 96(12), pages 1657-1666.
    14. Dui, Hongyan & Meng, Xueyu & Xiao, Hui & Guo, Jianjun, 2020. "Analysis of the cascading failure for scale-free networks based on a multi-strategy evolutionary game," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    15. Ahmed Ragab & Soumaya Yacout & Mohamed-Salah Ouali & Hany Osman, 2019. "Prognostics of multiple failure modes in rotating machinery using a pattern-based classifier and cumulative incidence functions," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 255-274, January.
    16. Wang, Chaonan & Liu, Qiongyang & Xing, Liudong & Guan, Quanlong & Yang, Chunhui & Yu, Min, 2022. "Reliability analysis of smart home sensor systems subject to competing failures," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    17. Che, Haiyang & Zeng, Shengkui & Guo, Jianbin & Wang, Yao, 2018. "Reliability modeling for dependent competing failure processes with mutually dependent degradation process and shock process," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 168-178.
    18. Levitin, Gregory & Xing, Liudong & Luo, Liang, 2019. "Influence of failure propagation on mission abort policy in heterogeneous warm standby systems," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 29-38.
    19. Jafary, Bentolhoda & Fiondella, Lance, 2016. "A universal generating function-based multi-state system performance model subject to correlated failures," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 16-27.
    20. Lin, Yan-Hui & Li, Yan-Fu & Zio, Enrico, 2018. "A comparison between Monte Carlo simulation and finite-volume scheme for reliability assessment of multi-state physics systems," Reliability Engineering and System Safety, Elsevier, vol. 174(C), pages 1-11.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:138:y:2015:i:c:p:273-283. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.