IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v278y2024ics0925527324002755.html
   My bibliography  Save this article

A deterministic fluid model for production and energy mode control of a single machine

Author

Listed:
  • Tan, Barış
  • Karabağ, Oktay

Abstract

Improving machines’ energy efficiency through dynamic energy mode control to meet demand requirements with minimal energy consumption is a promising approach. This study considers a machine operating in working, idle, off, and warmup energy modes with different energy consumption in each mode. A deterministic fluid model is developed to analyze an energy mode control policy that determines when to keep the machine working, off or idle, and switch to other modes based on the inventory/backlog level to minimize the total energy, inventory, and backlog costs. This approach facilitates the derivation of closed-form expressions for the optimal thresholds and the associated costs. This modeling approach allows us to prove that a policy that operates the machine between the working and off modes or the working and idle modes is always better than a hybrid policy that operates the machine in working, off, and idle modes simultaneously. We use the solution of the deterministic fluid model to propose an approximate policy for machines with stochastic production, warmup, and demand processes. We compare the results of the proposed approximation method with the optimal solution of a stochastic system where the production and warmup times are exponential and the demand inter-arrival times have Erlang distribution. The optimal solution for the stochastic system is determined by solving a Markovian Decision Process (MDP). Our numerical experiments show that the proposed approximation method predicts the optimal policy type for the stochastic case with a 89.3% accuracy, and the average error between the optimal cost and the cost obtained with the approximation method is 1.37% for 729 different cases tested. Furthermore, the computational efficiency of the proposed approximation is around 250 times better than the effort to determine the optimal policy using an MDP approach. We propose this approximation method where the control parameters are given in closed form as an easy-to-implement and effective policy to control energy modes to minimize the total energy, inventory, and backlog costs. Furthermore, we present the deterministic fluid modeling approach as a versatile approach to analyze energy mode control problems.

Suggested Citation

  • Tan, Barış & Karabağ, Oktay, 2024. "A deterministic fluid model for production and energy mode control of a single machine," International Journal of Production Economics, Elsevier, vol. 278(C).
    • Handle: RePEc:eee:proeco:v:278:y:2024:i:c:s0925527324002755
    DOI: 10.1016/j.ijpe.2024.109418
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527324002755
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2024.109418?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Battini, Daria & Persona, Alessandro & Sgarbossa, Fabio, 2014. "A sustainable EOQ model: Theoretical formulation and applications," International Journal of Production Economics, Elsevier, vol. 149(C), pages 145-153.
    2. Farnaz Ghazi Nezami & Mojtaba Heydar, 2019. "Energy-aware Economic Production Quantity model with variable energy pricing," Operational Research, Springer, vol. 19(1), pages 201-218, March.
    3. Gunasekaran, Angappa & Spalanzani, Alain, 2012. "Sustainability of manufacturing and services: Investigations for research and applications," International Journal of Production Economics, Elsevier, vol. 140(1), pages 35-47.
    4. Tan, Barış & Karabağ, Oktay & Khayyati, Siamak, 2023. "Production and energy mode control of a production-inventory system," European Journal of Operational Research, Elsevier, vol. 308(3), pages 1176-1187.
    5. Zhiyang Jia & Liang Zhang & Jorge Arinez & Guoxian Xiao, 2016. "Performance analysis for serial production lines with Bernoulli Machines and Real-time WIP-based Machine switch-on/off control," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6285-6301, November.
    6. Biel, K. & Glock, C. H., 2016. "Systematic literature review of decision support models for energy-efficient production planning," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 83071, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    7. Gahm, Christian & Denz, Florian & Dirr, Martin & Tuma, Axel, 2016. "Energy-efficient scheduling in manufacturing companies: A review and research framework," European Journal of Operational Research, Elsevier, vol. 248(3), pages 744-757.
    8. Hovelaque, Vincent & Bironneau, Laurent, 2015. "The carbon-constrained EOQ model with carbon emission dependent demand," International Journal of Production Economics, Elsevier, vol. 164(C), pages 285-291.
    9. Cardenas-Barron, Leopoldo Eduardo, 2001. "The economic production quantity (EPQ) with shortage derived algebraically," International Journal of Production Economics, Elsevier, vol. 70(3), pages 289-292, April.
    10. Noura Yassine, 2020. "A sustainable economic production model: effects of quality and emissions tax from transportation," Annals of Operations Research, Springer, vol. 290(1), pages 73-94, July.
    11. Lucas Dias Condeixa & Pierry Silva & Diego Moah & Brenda Farias & Adriana Leiras, 2022. "Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 30(3), pages 921-940, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Suzanne, Elodie & Absi, Nabil & Borodin, Valeria, 2020. "Towards circular economy in production planning: Challenges and opportunities," European Journal of Operational Research, Elsevier, vol. 287(1), pages 168-190.
    2. Golpîra, Hêriş, 2020. "Smart Energy-Aware Manufacturing Plant Scheduling under Uncertainty: A Risk-Based Multi-Objective Robust Optimization Approach," Energy, Elsevier, vol. 209(C).
    3. Hajo Terbrack & Thorsten Claus & Frank Herrmann, 2021. "Energy-Oriented Production Planning in Industry: A Systematic Literature Review and Classification Scheme," Sustainability, MDPI, vol. 13(23), pages 1-32, December.
    4. Ghorbanzadeh, Masoumeh & Ranjbar, Mohammad, 2023. "Energy-aware production scheduling in the flow shop environment under sequence-dependent setup times, group scheduling and renewable energy constraints," European Journal of Operational Research, Elsevier, vol. 307(2), pages 519-537.
    5. Wichmann, Matthias Gerhard & Johannes, Christoph & Spengler, Thomas Stefan, 2019. "Energy-oriented Lot-Sizing and Scheduling considering energy storages," International Journal of Production Economics, Elsevier, vol. 216(C), pages 204-214.
    6. Sgarbossa, Fabio & Russo, Ivan, 2017. "A proactive model in sustainable food supply chain: Insight from a case study," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 596-606.
    7. Özkan, Erhun & Tan, Barış, 2025. "Asymptotically optimal energy consumption and inventory control in a make-to-stock manufacturing system," European Journal of Operational Research, Elsevier, vol. 320(2), pages 375-388.
    8. Seokgi Lee & Mona Issabakhsh & Hyun Woo Jeon & Seong Wook Hwang & Byung Chung, 2020. "Idle time and capacity control for a single machine scheduling problem with dynamic electricity pricing," Operations Management Research, Springer, vol. 13(3), pages 197-217, December.
    9. Liao, Haolan & Wu, Di & Wang, Yuhan & Lyu, Zeyu & Sun, Hongmei & Nie, Yongyou & He, He, 2022. "Impacts of carbon trading mechanism on closed-loop supply chain: A case study of stringer pallet remanufacturing," Socio-Economic Planning Sciences, Elsevier, vol. 81(C).
    10. San-José, Luis A. & Sicilia, Joaquín & Cárdenas-Barrón, Leopoldo Eduardo & González-de-la-Rosa, Manuel, 2024. "A sustainable inventory model for deteriorating items with power demand and full backlogging under a carbon emission tax," International Journal of Production Economics, Elsevier, vol. 268(C).
    11. Ata Allah Taleizadeh & Bita Hazarkhani & Ilkyeong Moon, 2020. "Joint pricing and inventory decisions with carbon emission considerations, partial backordering and planned discounts," Annals of Operations Research, Springer, vol. 290(1), pages 95-113, July.
    12. Konstantaras, Ioannis & Skouri, Konstantina & Benkherouf, Lakdere, 2021. "Optimizing inventory decisions for a closed–loop supply chain model under a carbon tax regulatory mechanism," International Journal of Production Economics, Elsevier, vol. 239(C).
    13. Sujit Kumar De & Kousik Bhattacharya, 2022. "A Pollution Sensitive Marxian Production Inventory Model with Deterioration Under Fuzzy System," Journal of Optimization Theory and Applications, Springer, vol. 192(2), pages 598-627, February.
    14. Shen, Liji & Dauzère-Pérès, Stéphane & Maecker, Söhnke, 2023. "Energy cost efficient scheduling in flexible job-shop manufacturing systems," European Journal of Operational Research, Elsevier, vol. 310(3), pages 992-1016.
    15. Suchitra Pattnaik & Mitali Madhusmita Nayak & Stefano Abbate & Piera Centobelli, 2021. "Recent Trends in Sustainable Inventory Models: A Literature Review," Sustainability, MDPI, vol. 13(21), pages 1-20, October.
    16. Akbalik, Ayse & Gicquel, Céline & Penz, Bernard & Rapine, Christophe, 2025. "Lot sizing with capacity adjustment using on-site green and grid electricity," Omega, Elsevier, vol. 133(C).
    17. Jialiang Pan & Kun-Shan Wu & Chih-Te Yang & Chi-Jie Lu & Shin Lu, 2024. "Using Game Theory to Explore the Multinational Supply Chain Production Inventory Models of Various Carbon Emission Policy Combinations," Mathematics, MDPI, vol. 12(10), pages 1-18, May.
    18. Zhimiao Tao & Jiuping Xu, 2019. "Carbon-Regulated EOQ Models with Consumers’ Low-Carbon Awareness," Sustainability, MDPI, vol. 11(4), pages 1-16, February.
    19. Tapan Kumar Datta & Prasanta Nath & Karabi Dutta Choudhury, 2020. "A hybrid carbon policy inventory model with emission source-based green investments," OPSEARCH, Springer;Operational Research Society of India, vol. 57(1), pages 202-220, March.
    20. Arindam Ghosh & Maheswar Singha Mahapatra, 2024. "Bi-objective optimization model with economic and environmental consideration for an integrated supply chain with random demand and flexible production rate," OPSEARCH, Springer;Operational Research Society of India, vol. 61(3), pages 1541-1561, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:278:y:2024:i:c:s0925527324002755. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.