IDEAS home Printed from https://ideas.repec.org/a/eee/phsmap/v537y2020ics0378437119312361.html

Statistical and artificial based optimization on thermo-physical properties of an oil based hybrid nanofluid using NSGA-II and RSM

Author

Listed:
  • Hemmat Esfe, Mohammad
  • Sadati Tilebon, Seyyed Mohamad

Abstract

Optimization of thermal conductivity (TC) and viscosity of Al2O3-MWCNT/thermal oil hybrid nanofluid with NSGA-II and RSM was investigated. Effect of temperature and volume fraction (VF) on heat conduction and viscosity of the nanofluid was studied. Modeling of nanofluid properties of heat conduction and viscosity were done with RSM and MLP methods. Nanofluid TC and viscosity models of RSM have the regression coefficient of R 2=0.9959 and R 2=0.9989, respectively and adjusted regression coefficient of these models are Radj2=0.9947 and Radj2=0.9984, respectively. Based on these values, it can be concluded that this model is suitable for nanofluid TC and viscosity prediction. In MLP modeling the best topology and structure selected between more than 100 investigated topologies and optimal number of neurons determined for each hidden layer. Obtained results from MLP modeling, maximum residual values of nanofluid TC are +0.009, and -0.006 and maximum residual values of nanofluid viscosity are +0.016 and -0.02. Considering result of MLP, it may be concluded that the designed model is highly capable of predicting heat conduction and viscosity of the nanofluid. In optimization with NSGA-II, optimum viscosity and heat conduction were reported in maximum operating temperature. Furthermore, in RSM optimization, the optimum condition using this nanofluid was achieved in 49.99 °C and VF of 1.49% with TC of 0.1820 (W/mK), viscosity of 0.1174 (Pa.sec) and total desirability function of 0.9725. Desirability is a criterion for evaluation of optimization process accuracy. Experimental results revealed that temperature enhancement has a positive effect on both heat conductivity and viscosity of the nanofluid to reach the best nanofluid efficiency. Also, it was concluded that temperature and VF have direct effects on heat conductivity.

Suggested Citation

  • Hemmat Esfe, Mohammad & Sadati Tilebon, Seyyed Mohamad, 2020. "Statistical and artificial based optimization on thermo-physical properties of an oil based hybrid nanofluid using NSGA-II and RSM," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    • Handle: RePEc:eee:phsmap:v:537:y:2020:i:c:s0378437119312361
    DOI: 10.1016/j.physa.2019.122126
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378437119312361
    Download Restriction: Full text for ScienceDirect subscribers only. Journal offers the option of making the article available online on Science direct for a fee of $3,000
    File URL: https://libkey.io/10.1016/j.physa.2019.122126?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Bigdeli, Masoud Bozorg & Fasano, Matteo & Cardellini, Annalisa & Chiavazzo, Eliodoro & Asinari, Pietro, 2016. "A review on the heat and mass transfer phenomena in nanofluid coolants with special focus on automotive applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1615-1633.
    2. Ebrahimi-Moghadam, Amir & Mohseni-Gharyehsafa, Behnam & Farzaneh-Gord, Mahmood, 2018. "Using artificial neural network and quadratic algorithm for minimizing entropy generation of Al2O3-EG/W nanofluid flow inside parabolic trough solar collector," Renewable Energy, Elsevier, vol. 129(PA), pages 473-485.
    3. Iacobazzi, Fabrizio & Milanese, Marco & Colangelo, Gianpiero & Lomascolo, Mauro & de Risi, Arturo, 2016. "An explanation of the Al2O3 nanofluid thermal conductivity based on the phonon theory of liquid," Energy, Elsevier, vol. 116(P1), pages 786-794.
    4. Chandran, M. Neelesh & Manikandan, S. & Suganthi, K.S. & Rajan, K.S., 2017. "Novel hybrid nanofluid with tunable specific heat and thermal conductivity: Characterization and performance assessment for energy related applications," Energy, Elsevier, vol. 140(P1), pages 27-39.
    5. Alikar, Najmeh & Mousavi, Seyed Mohsen & Raja Ghazilla, Raja Ariffin & Tavana, Madjid & Olugu, Ezutah Udoncy, 2017. "Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 1-10.
    6. Hemmat Esfe, Mohammad & Abbasian Arani, Ali Akbar & Esfandeh, Saeed & Afrand, Masoud, 2019. "Proposing new hybrid nano-engine oil for lubrication of internal combustion engines: Preventing cold start engine damages and saving energy," Energy, Elsevier, vol. 170(C), pages 228-238.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tian, Zhe & Rostami, Sara & Taherialekouhi, Roozbeh & Karimipour, Arash & Moradikazerouni, Alireza & Yarmand, Hooman & Zulkifli, Nurin Wahidah Binti Mohd, 2020. "Prediction of rheological behavior of a new hybrid nanofluid consists of copper oxide and multi wall carbon nanotubes suspended in a mixture of water and ethylene glycol using curve-fitting on experimental data," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 549(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wei-Tao Wu & Mehrdad Massoudi & Hongbin Yan, 2017. "Heat Transfer and Flow of Nanofluids in a Y-Type Intersection Channel with Multiple Pulsations: A Numerical Study," Energies, MDPI, vol. 10(4), pages 1-18, April.
    2. Tawfik, Mohamed M., 2017. "Experimental studies of nanofluid thermal conductivity enhancement and applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1239-1253.
    3. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. Bo An & Qin Zhang & Lu Li & Fan Gao & Ke Wang & Jiaqi Yang, 2025. "Artificial Neural Network-Based Feedforward-Feedback Control for Parabolic Trough Concentrated Solar Field," Sustainability, MDPI, vol. 17(8), pages 1-17, April.
    5. Abubakr, Mohamed & Amein, Hamza & Akoush, Bassem M. & El-Bakry, M. Medhat & Hassan, Muhammed A., 2020. "An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids," Renewable Energy, Elsevier, vol. 157(C), pages 130-149.
    6. de Paula, Cassio Pereira & Visnadi, Lais Bittencourt & de Castro, Helio Fiori, 2019. "Multi-objective optimization in redundant system considering load sharing," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 17-27.
    7. Alawi, Omer A. & Kamar, Haslinda Mohamed & Homod, Raad Z. & Yaseen, Zaher Mundher, 2024. "Incorporating artificial intelligence-powered prediction models for exergy efficiency evaluation in parabolic trough collectors," Renewable Energy, Elsevier, vol. 225(C).
    8. Kailai Ni & Jianzhou Wang & Guangyu Tang & Danxiang Wei, 2019. "Research and Application of a Novel Hybrid Model Based on a Deep Neural Network for Electricity Load Forecasting: A Case Study in Australia," Energies, MDPI, vol. 12(13), pages 1-30, June.
    9. Abouei Ardakan, Mostafa & Rezvan, Mohammad Taghi, 2018. "Multi-objective optimization of reliability–redundancy allocation problem with cold-standby strategy using NSGA-II," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 225-238.
    10. Dianchen Lu & Muhammad Idrees Afridi & Usman Allauddin & Umer Farooq & Muhammad Qasim, 2020. "Entropy Generation in a Dissipative Nanofluid Flow under the Influence of Magnetic Dissipation and Transpiration," Energies, MDPI, vol. 13(20), pages 1-16, October.
    11. Safarianbana, Behnaz & Dashtbozorg, Amirhosein & Shanbedi, Mehdi, 2025. "Enhancing PV/T system efficiency with MAX phase/water nanofluids: Experimental insights into optimal cooling strategies," Energy, Elsevier, vol. 340(C).
    12. Minea, Alina Adriana & El-Maghlany, Wael M., 2018. "Influence of hybrid nanofluids on the performance of parabolic trough collectors in solar thermal systems: Recent findings and numerical comparison," Renewable Energy, Elsevier, vol. 120(C), pages 350-364.
    13. Ma, Ting & Guo, Zhixiong & Lin, Mei & Wang, Qiuwang, 2021. "Recent trends on nanofluid heat transfer machine learning research applied to renewable energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    14. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    15. Javaid, Usman & Mehmood, Adeel & Iqbal, Jamshed & Uppal, Ali Arshad, 2023. "Neural network and URED observer based fast terminal integral sliding mode control for energy efficient polymer electrolyte membrane fuel cell used in vehicular technologies," Energy, Elsevier, vol. 269(C).
    16. Hemmat Esfe, Mohammad & Reiszadeh, Mahdi & Esfandeh, Saeed & Afrand, Masoud, 2018. "Optimization of MWCNTs (10%) – Al2O3 (90%)/5W50 nanofluid viscosity using experimental data and artificial neural network," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 512(C), pages 731-744.
    17. Kebir, Anouer & Woodward, Lyne & Akhrif, Ouassima, 2019. "Real-time optimization of renewable energy sources power using neural network-based anticipative extremum-seeking control," Renewable Energy, Elsevier, vol. 134(C), pages 914-926.
    18. Ahmed, Waqar & Kazi, S.N. & Chowdhury, Z.Z. & Johan, Mohd Rafie Bin & Mehmood, Shahid & Soudagar, Manzoore Elahi M. & Mujtaba, M.A. & Gul, M. & Ahmad, Muhammad Shakeel, 2021. "Heat transfer growth of sonochemically synthesized novel mixed metal oxide ZnO+Al2O3+TiO2/DW based ternary hybrid nanofluids in a square flow conduit," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    19. Zhu, Guihua & Wang, Lingling & Bing, Naici & Xie, Huaqing & Yu, Wei, 2019. "Enhancement of photothermal conversion performance using nanofluids based on bimetallic Ag-Au alloys in nitrogen-doped graphitic polyhedrons," Energy, Elsevier, vol. 183(C), pages 747-755.
    20. Farzaneh-Gord, Mahmood & Mohseni-Gharyehsafa, Behnam & Arabkoohsar, Ahmad & Ahmadi, Mohammad Hossein & Sheremet, Mikhail A., 2020. "Precise prediction of biogas thermodynamic properties by using ANN algorithm," Renewable Energy, Elsevier, vol. 147(P1), pages 179-191.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:phsmap:v:537:y:2020:i:c:s0378437119312361. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/physica-a-statistical-mechpplications/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.