IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v93y2015ip2p1418-1425.html
   My bibliography  Save this article

Preference selection index approach for optimization of V down perforated baffled roughened rectangular channel

Author

Listed:
  • Chamoli, Sunil

Abstract

The research work analyzed the impact of insertion of the V down perforated baffles in the performance of the channel flow. The test apparatus is created, and all experimentation completed in the test rig and the information gathered for Nusselt number and friction factor for distinctive arrangement of roughness parameters. The test results demonstrate the critical improvement in both the Nusselt number and friction factor of the roughened channel over the smooth conduit. The open area ratio has a significant effect on the performance parameters, and it was found that there is a significant decrement in the pressure drop with an increase in the open area ratio. Preference selection method implied on performance prediction of roughened channel with a distinctive arrangement of roughness parameters, configurations using different PDCs including Nusselt number ratio, friction factor ratio, thermo hydraulic performance factor, thermal efficiency, effective efficiency and exergetic efficiency, respectively. The results of PSI (Preference selection index) show that the optimal formulation among all the configurations is with an open area ratio (β): 12%, relative roughness pitch (P/e): 2 and relative roughness height (e/H): 0.4.

Suggested Citation

  • Chamoli, Sunil, 2015. "Preference selection index approach for optimization of V down perforated baffled roughened rectangular channel," Energy, Elsevier, vol. 93(P2), pages 1418-1425.
    • Handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:1418-1425
    DOI: 10.1016/j.energy.2015.09.125
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215013481
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.09.125?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chamoli, Sunil & Thakur, N.S. & Saini, J.S., 2012. "A review of turbulence promoters used in solar thermal systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3154-3175.
    2. R.V. Rao & D. Singh & F. Bleicher & C. Dorn, 2012. "Weighted Euclidean distance-based approach as a multiple attribute decision making method for manufacturing situations," International Journal of Multicriteria Decision Making, Inderscience Enterprises Ltd, vol. 2(3), pages 225-240.
    3. Choudhary, Devendra & Shankar, Ravi, 2012. "An STEEP-fuzzy AHP-TOPSIS framework for evaluation and selection of thermal power plant location: A case study from India," Energy, Elsevier, vol. 42(1), pages 510-521.
    4. Sachin K. Patil & Ravi Kant, 2014. "Ranking the barriers of knowledge management adoption in supply chain using fuzzy AHP method," International Journal of Business Innovation and Research, Inderscience Enterprises Ltd, vol. 8(1), pages 52-75.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Khargotra, Rohit & Kumar, Raj & András, Kovács & Fekete, Gusztáv & Singh, Tej, 2022. "Thermo-hydraulic characterization and design optimization of delta-shaped obstacles in solar water heating system using CRITIC-COPRAS approach," Energy, Elsevier, vol. 261(PB).
    2. Tabish Alam & Chandan Swaroop Meena & Nagesh Babu Balam & Ashok Kumar & Raffaello Cozzolino, 2021. "Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater," Energies, MDPI, vol. 14(11), pages 1-19, May.
    3. Chauhan, Ranchan & Singh, Tej & Thakur, N.S. & Kumar, Nitin & Kumar, Raj & Kumar, Anil, 2018. "Heat transfer augmentation in solar thermal collectors using impinging air jets: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3179-3190.
    4. Chauhan, Ranchan & Singh, Tej & Tiwari, Avinash & Patnaik, Amar & Thakur, N.S., 2017. "Hybrid entropy – TOPSIS approach for energy performance prioritization in a rectangular channel employing impinging air jets," Energy, Elsevier, vol. 134(C), pages 360-368.
    5. Chen, Faan & Li, Yaxin & Feng, Qianqian & Dong, Zehao & Qian, Yiming & Yan, Yi & Ho, Mun S. & Ma, Qianchen & Zhang, Dashan & Jin, Yuanzhe, 2023. "Road safety performance rating through PSI-PRIDIT: A planning tool for designing policies and identifying best practices for EAS countries," Socio-Economic Planning Sciences, Elsevier, vol. 85(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chamoli, Sunil, 2015. "Hybrid FAHP (fuzzy analytical hierarchy process)-FTOPSIS (fuzzy technique for order preference by similarity of an ideal solution) approach for performance evaluation of the V down perforated baffle r," Energy, Elsevier, vol. 84(C), pages 432-442.
    2. Ceren Erdin & Halil Emre Akbaş, 2019. "A Comparative Analysis of Fuzzy TOPSIS and Geographic Information Systems (GIS) for the Location Selection of Shopping Malls: A Case Study from Turkey," Sustainability, MDPI, vol. 11(14), pages 1-22, July.
    3. V. G. Venkatesh & Abraham Zhang & Eric Deakins & Sunil Luthra & S. Mangla, 2019. "A fuzzy AHP-TOPSIS approach to supply partner selection in continuous aid humanitarian supply chains," Annals of Operations Research, Springer, vol. 283(1), pages 1517-1550, December.
    4. Hristos Karahalios, 2021. "Contribution of PSC Authorities to Ship Accident Prevention," SN Operations Research Forum, Springer, vol. 2(1), pages 1-18, March.
    5. Deveci, Muhammet & Cali, Umit & Kucuksari, Sadik & Erdogan, Nuh, 2020. "Interval type-2 fuzzy sets based multi-criteria decision-making model for offshore wind farm development in Ireland," Energy, Elsevier, vol. 198(C).
    6. Caetani, Alberto Pavlick & Ferreira, Luciano & Borenstein, Denis, 2016. "Development of an integrated decision-making method for an oil refinery restructuring in Brazil," Energy, Elsevier, vol. 111(C), pages 197-210.
    7. Marco Rogna, 2019. "A First-Phase Screening Device for Site Selection of Large-Scale Solar Plants with an Application to Italy," BEMPS - Bozen Economics & Management Paper Series BEMPS57, Faculty of Economics and Management at the Free University of Bozen.
    8. Abdul, Daud & Wenqi, Jiang & Tanveer, Arsalan, 2022. "Prioritization of renewable energy source for electricity generation through AHP-VIKOR integrated methodology," Renewable Energy, Elsevier, vol. 184(C), pages 1018-1032.
    9. Mahsa Ghandi & Abbas Roozbahani, 2020. "Risk Management of Drinking Water Supply in Critical Conditions Using Fuzzy PROMETHEE V Technique," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 34(2), pages 595-615, January.
    10. Al-Husain, Raed & Khorramshahgol, Reza, 2020. "Incorporating analytical hierarchy process and goal programming to design responsive and efficient supply chains," Operations Research Perspectives, Elsevier, vol. 7(C).
    11. Sebastian Ion Ceptureanu & Eduard Gabriel Ceptureanu & Marieta Olaru & Doina I. Popescu, 2018. "An Exploratory Study on Knowledge Management Process Barriers in the Oil Industry," Energies, MDPI, vol. 11(8), pages 1-15, July.
    12. Sellak, Hamza & Ouhbi, Brahim & Frikh, Bouchra & Palomares, Iván, 2017. "Towards next-generation energy planning decision-making: An expert-based framework for intelligent decision support," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1544-1577.
    13. Ustaoglu, E. & Sisman, S. & Aydınoglu, A.C., 2021. "Determining agricultural suitable land in peri-urban geography using GIS and Multi Criteria Decision Analysis (MCDA) techniques," Ecological Modelling, Elsevier, vol. 455(C).
    14. Yasir Ahmed Solangi & Qingmei Tan & Muhammad Waris Ali Khan & Nayyar Hussain Mirjat & Ifzal Ahmed, 2018. "The Selection of Wind Power Project Location in the Southeastern Corridor of Pakistan: A Factor Analysis, AHP, and Fuzzy-TOPSIS Application," Energies, MDPI, vol. 11(8), pages 1-26, July.
    15. Xu, Jiuping & Song, Xiaoling & Wu, Yimin & Zeng, Ziqiang, 2015. "GIS-modelling based coal-fired power plant site identification and selection," Applied Energy, Elsevier, vol. 159(C), pages 520-539.
    16. Jiuping Xu & Xianglan Jiang & Zhibin Wu, 2016. "A Sustainable Performance Assessment Framework for Plastic Film Supply Chain Management from a Chinese Perspective," Sustainability, MDPI, vol. 8(10), pages 1-23, October.
    17. Hsin-Chieh Wu & Toly Chen & Chin-Hau Huang, 2020. "A Piecewise Linear FGM Approach for Efficient and Accurate FAHP Analysis: Smart Backpack Design as an Example," Mathematics, MDPI, vol. 8(8), pages 1-18, August.
    18. Yunna Wu & Meng Yang & Haobo Zhang & Kaifeng Chen & Yang Wang, 2016. "Optimal Site Selection of Electric Vehicle Charging Stations Based on a Cloud Model and the PROMETHEE Method," Energies, MDPI, vol. 9(3), pages 1-20, March.
    19. K. Mathiyazhagan & Srijit Krishnan & Uma Bharathi & Andrea Appolloni, 2021. "Pathways towards reverse logistics adoption in Indian educational institutes: a challenging factors analysis," OPSEARCH, Springer;Operational Research Society of India, vol. 58(3), pages 661-689, September.
    20. Wang, H., 2015. "A generalized MCDA–DEA (multi-criterion decision analysis–data envelopment analysis) approach to construct slacks-based composite indicator," Energy, Elsevier, vol. 80(C), pages 114-122.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:1418-1425. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.