IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v75y2014icp534-548.html
   My bibliography  Save this article

Numerical investigation of impeller trimming effect on performance of an axial flow fan

Author

Listed:
  • Li, Chunxi
  • Li, Xinying
  • Li, Pengmin
  • Ye, Xuemin

Abstract

To study the performance variations of an axial fan after impeller trimming, numerical simulations are executed under the following conditions: trimming quantity of 5%, 10%, and 15% of blade height, with tip clearance changed and unchanged. The effects of trimming quantity and tip clearance on flow field and performance of the axial fan are investigated, and formulae are presented for total pressure rise and flow rate ratio versus impeller diameter ratio and for operating points before and after impeller trimming. The simulated results show that the performance curves after impeller trimming tend to decline. Near the design flow rate, the performance of the fan with unchanged tip clearance is aerodynamically superior to that with changed tip clearance; the former deteriorates at a large flow rate. The margin of parameters provided by design units exceeding the actual operation requires the fan to normally operate to the left of the rated load, therefore, axial fans with tip clearance unchanged after impeller trimming have been found to maintain better performance. The equations, denoting total pressure rise ratio and flow rate ratio versus impeller diameter ratio are available to determine the trimming quantity according to actual requirements of operating points after impeller trimming.

Suggested Citation

  • Li, Chunxi & Li, Xinying & Li, Pengmin & Ye, Xuemin, 2014. "Numerical investigation of impeller trimming effect on performance of an axial flow fan," Energy, Elsevier, vol. 75(C), pages 534-548.
    • Handle: RePEc:eee:energy:v:75:y:2014:i:c:p:534-548
    DOI: 10.1016/j.energy.2014.08.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544214009517
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2014.08.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gao, Jie & Zheng, Qun & Zhang, Zhengyi & Jiang, Yuting, 2014. "Aero-thermal performance improvements of unshrouded turbines through management of tip leakage and injection flows," Energy, Elsevier, vol. 69(C), pages 648-660.
    2. Wu, Baigong & Zhang, Xueming & Chen, Jianmei & Xu, Mingqi & Li, Shuangxin & Li, Guangzhe, 2013. "Design of high-efficient and universally applicable blades of tidal stream turbine," Energy, Elsevier, vol. 60(C), pages 187-194.
    3. He, Weifeng & Dai, Yiping & Zhu, Shi & Han, Dong & Yue, Chen & Pu, Wenhao, 2013. "Influence from the blade installation angle of the windward axial fans on the performance of an air-cooled power plant," Energy, Elsevier, vol. 60(C), pages 416-425.
    4. Mohamed, M.H. & Shaaban, S., 2013. "Optimization of blade pitch angle of an axial turbine used for wave energy conversion," Energy, Elsevier, vol. 56(C), pages 229-239.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Manaserh, Yaman M. & Tradat, Mohammad I. & Bani-Hani, Dana & Alfallah, Aseel & Sammakia, Bahgat G. & Nemati, Kourosh & Seymour, Mark J., 2022. "Machine learning assisted development of IT equipment compact models for data centers energy planning," Applied Energy, Elsevier, vol. 305(C).
    2. Xuemin Ye & Fuwei Fan & Ruixing Zhang & Chunxi Li, 2019. "Prediction of Performance of a Variable-Pitch Axial Fan with Forward-Skewed Blades," Energies, MDPI, vol. 12(12), pages 1-20, June.
    3. Liu, Xue & Liu, Jian & Wang, Dong & Zhao, Long, 2021. "Experimental and numerical simulation investigations of an axial flow fan performance in high-altitude environments," Energy, Elsevier, vol. 234(C).
    4. Yonggang Gou & Xiuzhi Shi & Jian Zhou & Xianyang Qiu & Xin Chen, 2017. "Characterization and Effects of the Shock Losses in a Parallel Fan Station in the Underground Mine," Energies, MDPI, vol. 10(6), pages 1-20, June.
    5. Ye, Xuemin & Li, Pengmin & Li, Chunxi & Ding, Xueliang, 2015. "Numerical investigation of blade tip grooving effect on performance and dynamics of an axial flow fan," Energy, Elsevier, vol. 82(C), pages 556-569.
    6. Zhang, Lei & He, Ruiyang & Wang, Xin & Zhang, Qian & Wang, Songling, 2019. "Study on static and dynamic characteristics of an axial fan with abnormal blade under rotating stall conditions," Energy, Elsevier, vol. 170(C), pages 305-325.
    7. Wang, Youhao & Sun, Lihui & Guo, Chang & He, Suoying & Gao, Ming & Xu, Qinghua & Zhang, Qiang, 2023. "Vibration characteristics and strength analysis of two-stage variable-pitch axial-flow fan based on fluid-solid coupling method," Energy, Elsevier, vol. 284(C).
    8. Ye, Xuemin & Zhang, Jiankun & Li, Chunxi, 2017. "Effect of blade tip pattern on performance of a twin-stage variable-pitch axial fan," Energy, Elsevier, vol. 126(C), pages 535-563.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gao, Jie & Zheng, Qun & Xu, Tianbang & Dong, Ping, 2015. "Inlet conditions effect on tip leakage vortex breakdown in unshrouded axial turbines," Energy, Elsevier, vol. 91(C), pages 255-263.
    2. Ye, Xuemin & Li, Pengmin & Li, Chunxi & Ding, Xueliang, 2015. "Numerical investigation of blade tip grooving effect on performance and dynamics of an axial flow fan," Energy, Elsevier, vol. 82(C), pages 556-569.
    3. Gao, Jie & Zheng, Qun & Jia, Xiaoquan, 2014. "Performance improvement of shrouded turbines with the management of casing endwall interaction flows," Energy, Elsevier, vol. 75(C), pages 430-442.
    4. Gao, Jie & Zheng, Qun & Zhang, Zhengyi & Jiang, Yuting, 2014. "Aero-thermal performance improvements of unshrouded turbines through management of tip leakage and injection flows," Energy, Elsevier, vol. 69(C), pages 648-660.
    5. López, I. & Castro, A. & Iglesias, G., 2015. "Hydrodynamic performance of an oscillating water column wave energy converter by means of particle imaging velocimetry," Energy, Elsevier, vol. 83(C), pages 89-103.
    6. Meng, Haoran & Ma, Zhe & Dou, Bingzheng & Zeng, Pan & Lei, Liping, 2020. "Investigation on the performance of a novel forward-folding rotor used in a downwind horizontal-axis turbine," Energy, Elsevier, vol. 190(C).
    7. Paresh Halder & Hideki Takebe & Krisna Pawitan & Jun Fujita & Shuji Misumi & Tsumoru Shintake, 2020. "Turbine Characteristics of Wave Energy Conversion Device for Extraction Power Using Breaking Waves," Energies, MDPI, vol. 13(4), pages 1-17, February.
    8. Xu, Wei & Chen, Genglin & Shi, Huijin & Zhang, Pengcheng & Chen, Xuemei, 2023. "Research on operational characteristics of coal power centrifugal fans at off-design working conditions based on flap-angle adjustment," Energy, Elsevier, vol. 284(C).
    9. Ramadan, A. & Mohamed, M.H. & Marzok, S.Y. & Montasser, O.A. & El Feky, A. & El Baz, A.R., 2014. "An artificial generation of a few specific wave conditions: New simulator design and experimental performance," Energy, Elsevier, vol. 69(C), pages 309-318.
    10. Wu, Baigong & Zhan, Mingjing & Wu, Rujian & Zhang, Xiao, 2023. "The investigation of a coaxial twin-counter-rotating turbine with variable-pitch adaptive blades," Energy, Elsevier, vol. 267(C).
    11. Dou, Bingzheng & Guala, Michele & Lei, Liping & Zeng, Pan, 2019. "Experimental investigation of the performance and wake effect of a small-scale wind turbine in a wind tunnel," Energy, Elsevier, vol. 166(C), pages 819-833.
    12. Mohamed, M.H., 2014. "Aero-acoustics noise evaluation of H-rotor Darrieus wind turbines," Energy, Elsevier, vol. 65(C), pages 596-604.
    13. Zou, Zhengping & Shao, Fei & Li, Yiran & Zhang, Weihao & Berglund, Albin, 2017. "Dominant flow structure in the squealer tip gap and its impact on turbine aerodynamic performance," Energy, Elsevier, vol. 138(C), pages 167-184.
    14. Das, Tapas K. & Kumar, Kumud & Samad, Abdus, 2020. "Experimental Analysis of a Biplane Wells Turbine under Different Load Conditions," Energy, Elsevier, vol. 206(C).
    15. Guo, Qiang & Zhou, Lingjiu & Wang, Zhengwei, 2016. "Numerical evaluation of the clearance geometries effect on the flow field and performance of a hydrofoil," Renewable Energy, Elsevier, vol. 99(C), pages 390-397.
    16. Wang, Ying & Sun, Xiaojing & Huang, Diangui & Zheng, Zhongquan, 2016. "Numerical investigation on energy extraction of flapping hydrofoils with different series foil shapes," Energy, Elsevier, vol. 112(C), pages 1153-1168.
    17. Dong, Yongjun & Guo, Jingfu & Chen, Jianmei & Sun, Chao & Zhu, Wanqiang & Chen, Liwei & Zhang, Xueming, 2021. "Development of a 300 kW horizontal-axis tidal stream energy conversion system with adaptive variable-pitch turbine and direct-drive PMSG," Energy, Elsevier, vol. 226(C).
    18. Nazeryan, Mohammad & Lakzian, Esmail, 2018. "Detailed entropy generation analysis of a Wells turbine using the variation of the blade thickness," Energy, Elsevier, vol. 143(C), pages 385-405.
    19. Maakala, Viljami & Järvinen, Mika & Vuorinen, Ville, 2018. "Optimizing the heat transfer performance of the recovery boiler superheaters using simulated annealing, surrogate modeling, and computational fluid dynamics," Energy, Elsevier, vol. 160(C), pages 361-377.
    20. Thiébot, Jérôme & Bailly du Bois, Pascal & Guillou, Sylvain, 2015. "Numerical modeling of the effect of tidal stream turbines on the hydrodynamics and the sediment transport – Application to the Alderney Race (Raz Blanchard), France," Renewable Energy, Elsevier, vol. 75(C), pages 356-365.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:75:y:2014:i:c:p:534-548. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.