IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i2p847-853.html
   My bibliography  Save this article

Electrocatalytic activity of simple and modified Fe–P electrodeposits for hydrogen evolution from alkaline media

Author

Listed:
  • Sequeira, C.A.C.
  • Santos, D.M.F.
  • Brito, P.S.D.

Abstract

Electrodeposition of Fe–P, Fe–P–Pt and Fe–P–Ce into copper substrates is carried out under galvanostatic conditions. The influence of the current density on the composition of the deposits and the current efficiencies for the electrodeposition processes are determined. Preliminary data indicate that addition of formic acid to the electroplating bath improves the current efficiency for electrodeposition. Electrocatalytic activities of the heat-treated plated materials are investigated by dc polarisation and ac impedance techniques for the hydrogen evolution reaction (HER) in 1M NaOH solution at 298K. Steady-state polarisation curves and electrochemical impedance spectroscopy data show that improved catalytic activities for the HER are due to an increase in the effective surface area, a change in surface features upon heat treatment, the partial contribution of the Pt component, and the electrocatalytic synergism with Fe imposed by the Ce co-deposit. Cathodic potentiostatic measurements for medium time operation indicate that the electroplated materials are stable even in moderately aggressive alkaline solutions.

Suggested Citation

  • Sequeira, C.A.C. & Santos, D.M.F. & Brito, P.S.D., 2011. "Electrocatalytic activity of simple and modified Fe–P electrodeposits for hydrogen evolution from alkaline media," Energy, Elsevier, vol. 36(2), pages 847-853.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:2:p:847-853
    DOI: 10.1016/j.energy.2010.12.030
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544210007206
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2010.12.030?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Penner, S.S., 2006. "Steps toward the hydrogen economy," Energy, Elsevier, vol. 31(1), pages 33-43.
    2. Kato, Takeyoshi & Kubota, Mitsuhiro & Kobayashi, Noriyuki & Suzuoki, Yasuo, 2005. "Effective utilization of by-product oxygen from electrolysis hydrogen production," Energy, Elsevier, vol. 30(14), pages 2580-2595.
    3. Marshall, A. & Børresen, B. & Hagen, G. & Tsypkin, M. & Tunold, R., 2007. "Hydrogen production by advanced proton exchange membrane (PEM) water electrolysers—Reduced energy consumption by improved electrocatalysis," Energy, Elsevier, vol. 32(4), pages 431-436.
    4. Mbah, Jonathan & Weaver, Eric & Srinivasan, Sesha & Krakow, Burton & Wolan, John & Goswami, Yogi & Stefanakos, Elias, 2010. "Low voltage H2O electrolysis for enhanced hydrogen production," Energy, Elsevier, vol. 35(12), pages 5008-5012.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ensafi, Ali A. & Nabiyan, Afshin & Jafari-Asl, Mehdi & Dinari, Mohammad & Farrokhpour, Hossein & Rezaei, B., 2016. "Galvanic exchange at layered doubled hydroxide/N-doped graphene as an in-situ method to fabricate powerful electrocatalysts for hydrogen evolution reaction," Energy, Elsevier, vol. 116(P1), pages 1087-1096.
    2. Santos, D.M.F. & Šljukić, B. & Sequeira, C.A.C. & Macciò, D. & Saccone, A. & Figueiredo, J.L., 2013. "Electrocatalytic approach for the efficiency increase of electrolytic hydrogen production: Proof-of-concept using platinum--dysprosium alloys," Energy, Elsevier, vol. 50(C), pages 486-492.
    3. Wu, Liang & He, Yuehui & Lei, Ting & Nan, Bo & Xu, Nanping & Zou, Jin & Huang, Baiyun & Liu, C.T., 2013. "Characterization of the porous Ni3Al–Mo electrodes during hydrogen generation from alkaline water electrolysis," Energy, Elsevier, vol. 63(C), pages 216-224.
    4. Yang, Meijun & Zhang, Dongming, 2014. "Effect of surface treatment on the interfacial contact resistance and corrosion resistance of Fe–Ni–Cr alloy as a bipolar plate for polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 64(C), pages 242-247.
    5. Zhang, Houcheng & Lin, Guoxing & Chen, Jincan, 2011. "The performance analysis and multi-objective optimization of a typical alkaline fuel cell," Energy, Elsevier, vol. 36(7), pages 4327-4332.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Santos, D.M.F. & Šljukić, B. & Sequeira, C.A.C. & Macciò, D. & Saccone, A. & Figueiredo, J.L., 2013. "Electrocatalytic approach for the efficiency increase of electrolytic hydrogen production: Proof-of-concept using platinum--dysprosium alloys," Energy, Elsevier, vol. 50(C), pages 486-492.
    2. Ravichandran, S. & Venkatkarthick, R. & Sankari, A. & Vasudevan, S. & Jonas Davidson, D. & Sozhan, G., 2014. "Platinum deposition on the nafion membrane by impregnation reduction using nonionic surfactant for water electrolysis – An alternate approach," Energy, Elsevier, vol. 68(C), pages 148-151.
    3. El-Askary, W.A. & Sakr, I.M. & Ibrahim, K.A. & Balabel, A., 2015. "Hydrodynamics characteristics of hydrogen evolution process through electrolysis: Numerical and experimental studies," Energy, Elsevier, vol. 90(P1), pages 722-737.
    4. Hunt, Julian David & Nascimento, Andreas & Zakeri, Behnam & Barbosa, Paulo Sérgio Franco, 2022. "Hydrogen Deep Ocean Link: a global sustainable interconnected energy grid," Energy, Elsevier, vol. 249(C).
    5. Luo, Yu & Shi, Yixiang & Li, Wenying & Cai, Ningsheng, 2014. "Comprehensive modeling of tubular solid oxide electrolysis cell for co-electrolysis of steam and carbon dioxide," Energy, Elsevier, vol. 70(C), pages 420-434.
    6. Xiang Huang & Yapan Qu & Zhentao Zhu & Qiuchi Wu, 2023. "Techno-Economic Analysis of Photovoltaic Hydrogen Production Considering Technological Progress Uncertainty," Sustainability, MDPI, vol. 15(4), pages 1-29, February.
    7. Saxe, Maria & Alvfors, Per, 2007. "Advantages of integration with industry for electrolytic hydrogen production," Energy, Elsevier, vol. 32(1), pages 42-50.
    8. Bose, Probir Kumar & Deb, Madhujit & Banerjee, Rahul & Majumder, Arindam, 2013. "Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approach," Energy, Elsevier, vol. 63(C), pages 375-386.
    9. Weng, Baicheng & Wu, Zhu & Li, Zhilin & Yang, Hui, 2012. "Hydrogen generation from hydrolysis of MNH2BH3 and NH3BH3/MH (M=Li, Na) for fuel cells based unmanned submarine vehicles application," Energy, Elsevier, vol. 38(1), pages 205-211.
    10. Aasadnia, Majid & Mehrpooya, Mehdi, 2018. "Large-scale liquid hydrogen production methods and approaches: A review," Applied Energy, Elsevier, vol. 212(C), pages 57-83.
    11. Kotowicz, Janusz & Bartela, Łukasz & Węcel, Daniel & Dubiel, Klaudia, 2017. "Hydrogen generator characteristics for storage of renewably-generated energy," Energy, Elsevier, vol. 118(C), pages 156-171.
    12. Botterud, Audun & Yildiz, Bilge & Conzelmann, Guenter & Petri, Mark C., 2008. "Nuclear hydrogen: An assessment of product flexibility and market viability," Energy Policy, Elsevier, vol. 36(10), pages 3961-3973, October.
    13. Hafizi, A. & Rahimpour, M.R. & Hassanajili, Sh., 2016. "Hydrogen production via chemical looping steam methane reforming process: Effect of cerium and calcium promoters on the performance of Fe2O3/Al2O3 oxygen carrier," Applied Energy, Elsevier, vol. 165(C), pages 685-694.
    14. Michalsky, Ronald & Parman, Bryon J. & Amanor-Boadu, Vincent & Pfromm, Peter H., 2012. "Solar thermochemical production of ammonia from water, air and sunlight: Thermodynamic and economic analyses," Energy, Elsevier, vol. 42(1), pages 251-260.
    15. Mo, Jingke & Kang, Zhenye & Yang, Gaoqiang & Retterer, Scott T. & Cullen, David A. & Toops, Todd J. & Green, Johney B. & Zhang, Feng-Yuan, 2016. "Thin liquid/gas diffusion layers for high-efficiency hydrogen production from water splitting," Applied Energy, Elsevier, vol. 177(C), pages 817-822.
    16. Manish Kumar Singla & Jyoti Gupta & Parag Nijhawan & Amandeep Singh Oberoi & Mohammed H. Alsharif & Abu Jahid, 2023. "Role of a Unitized Regenerative Fuel Cell in Remote Area Power Supply: A Review," Energies, MDPI, vol. 16(15), pages 1-21, August.
    17. Deshmukh, Sachin S. & Boehm, Robert F., 2008. "Review of modeling details related to renewably powered hydrogen systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2301-2330, December.
    18. Olateju, Babatunde & Kumar, Amit, 2011. "Hydrogen production from wind energy in Western Canada for upgrading bitumen from oil sands," Energy, Elsevier, vol. 36(11), pages 6326-6339.
    19. Pantò, Fabiola & Siracusano, Stefania & Briguglio, Nicola & Aricò, Antonino Salvatore, 2020. "Durability of a recombination catalyst-based membrane-electrode assembly for electrolysis operation at high current density," Applied Energy, Elsevier, vol. 279(C).
    20. González Rodríguez, Daniel & Brayner de Oliveira Lira, Carlos Alberto & García Parra, Lázaro Roger & García Hernández, Carlos Rafael & de la Torre Valdés, Raciel, 2018. "Computational model of a sulfur-iodine thermochemical water splitting system coupled to a VHTR for nuclear hydrogen production," Energy, Elsevier, vol. 147(C), pages 1165-1176.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:2:p:847-853. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.