IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v314y2025ics0360544224039355.html
   My bibliography  Save this article

Optimal design of Archimedes Wind Turbine using genetic algorithm

Author

Listed:
  • Salah Samiani, Omid
  • Boroushaki, Mehrdad

Abstract

This study aims to employ Genetic Algorithms (GA) to optimize the Archimedes Wind Turbine's (AWT) structure. The distinct design of the AWT necessitates a different methodology than standard lift-type wind turbines. Computational Fluid Dynamics (CFD) was used to evaluate the performance of the design based on the SST k-ω model. In order to validate the simulation results, the acquired data was compared with those from earlier design studies. Simulation results showed that the differences between the two studies' Mean Absolute Error (MAE) were only 5.9 %. GA was selected in an iterative link with ANSYS software to find the optimal turbine's structure. This study investigated several scenarios in which the design variables including opening angle, pitches, and rotational speed were changed, either separately or in combination. In the most comprehensive scenario, an optimized AWT with opening angle of 63.49°, Tip Speed Ratio (TSR) of 1.12, pitch1 value of 115.03 mm, and pitch2 value of 389.54 mm was obtained, where the search space includes all parameters. This design resulted in a power coefficient equal to 0.2644, which shows a 27.72 % increase in efficiency and 7.94 % reduce in thrust force.

Suggested Citation

  • Salah Samiani, Omid & Boroushaki, Mehrdad, 2025. "Optimal design of Archimedes Wind Turbine using genetic algorithm," Energy, Elsevier, vol. 314(C).
    • Handle: RePEc:eee:energy:v:314:y:2025:i:c:s0360544224039355
    DOI: 10.1016/j.energy.2024.134157
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224039355
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.134157?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hyeonmu Jang & Insu Paek & Seungjoo Kim & Deockjin Jeong, 2019. "Performance Prediction and Validation of a Small-Capacity Twisted Savonius Wind Turbine," Energies, MDPI, vol. 12(9), pages 1-12, May.
    2. Refaie, Abdelaziz G. & Abdel Hameed, H.S. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2021. "Qualitative and quantitative assessments of an Archimedes Spiral Wind Turbine performance augmented by A concentrator," Energy, Elsevier, vol. 231(C).
    3. Heikal, Hasim A. & Abu-Elyazeed, Osayed S.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Maged M.S., 2018. "On the actual power coefficient by theoretical developing of the diffuser flange of wind-lens turbine," Renewable Energy, Elsevier, vol. 125(C), pages 295-305.
    4. Kamal, Ahmed M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses," Energy, Elsevier, vol. 262(PB).
    5. Kyung Chun Kim & Ho Seong Ji & Yoon Kee Kim & Qian Lu & Joon Ho Baek & Rinus Mieremet, 2014. "Experimental and Numerical Study of the Aerodynamic Characteristics of an Archimedes Spiral Wind Turbine Blade," Energies, MDPI, vol. 7(12), pages 1-22, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Abdel Hameed, Hossam S. & Hashem, Islam & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Shape optimization of a shrouded Archimedean-spiral type wind turbine for small-scale applications," Energy, Elsevier, vol. 263(PB).
    2. Hamid, Hossam & Mohamed Abd El Maksoud, Rafea, 2024. "An optimization study of passive flow control mechanism for a seashell-shaped wind turbine," Energy, Elsevier, vol. 289(C).
    3. Kamal, Ahmed M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2022. "Blade design effect on Archimedes Spiral Wind Turbine performance: Experimental and numerical evaluations," Energy, Elsevier, vol. 250(C).
    4. Kamal, Ahmed M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses," Energy, Elsevier, vol. 262(PB).
    5. Refaie, Abdelaziz G. & Hameed, H.S. Abdel & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2022. "Comparative investigation of the aerodynamic performance for several Shrouded Archimedes Spiral Wind Turbines," Energy, Elsevier, vol. 239(PC).
    6. Aitor Arzuaga & Asier Estivariz & Oihan Fernández & Kristian Gubía & Ander Plaza & Gonzalo Abad & David Cabezuelo Romero, 2023. "Low-Cost Maximum Power Point Tracking Strategy and Protection Circuit Applied to an Ayanz Wind Turbine with Screw Blades," Energies, MDPI, vol. 16(17), pages 1-24, August.
    7. Refaie, Abdelaziz G. & Abdel Hameed, H.S. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2021. "Qualitative and quantitative assessments of an Archimedes Spiral Wind Turbine performance augmented by A concentrator," Energy, Elsevier, vol. 231(C).
    8. Ke Song & Huiting Huan & Yuchi Kang, 2022. "Aerodynamic Performance and Wake Characteristics Analysis of Archimedes Spiral Wind Turbine Rotors with Different Blade Angle," Energies, MDPI, vol. 16(1), pages 1-18, December.
    9. Hyeonmu Jang & Dongmyeong Kim & Yechan Hwang & Insu Paek & Seungjoo Kim & Joonho Baek, 2019. "Analysis of Archimedes Spiral Wind Turbine Performance by Simulation and Field Test," Energies, MDPI, vol. 12(24), pages 1-11, December.
    10. Nawar, Mohamed A.A. & Hameed, H.S. Abdel & Ramadan, A. & Attai, Youssef A. & Mohamed, M.H., 2021. "Experimental and numerical investigations of the blade design effect on Archimedes Spiral Wind Turbine performance," Energy, Elsevier, vol. 223(C).
    11. Rahmatian, Mohammad Ali & Hashemi Tari, Pooyan & Mojaddam, Mohammad & Majidi, Sahand, 2022. "Numerical and experimental study of the ducted diffuser effect on improving the aerodynamic performance of a micro horizontal axis wind turbine," Energy, Elsevier, vol. 245(C).
    12. Kerikous, Emeel & Thévenin, Dominique, 2019. "Optimal shape and position of a thick deflector plate in front of a hydraulic Savonius turbine," Energy, Elsevier, vol. 189(C).
    13. Victor Mendoza & Eirini Katsidoniotaki & Hans Bernhoff, 2020. "Numerical Study of a Novel Concept for Manufacturing Savonius Turbines with Twisted Blades," Energies, MDPI, vol. 13(8), pages 1-16, April.
    14. Nunes, Matheus M. & Brasil Junior, Antonio C.P. & Oliveira, Taygoara F., 2020. "Systematic review of diffuser-augmented horizontal-axis turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    15. Mohammad Hassan Ranjbar & Behnam Rafiei & Seyyed Abolfazl Nasrazadani & Kobra Gharali & Madjid Soltani & Armughan Al-Haq & Jatin Nathwani, 2021. "Power Enhancement of a Vertical Axis Wind Turbine Equipped with an Improved Duct," Energies, MDPI, vol. 14(18), pages 1-16, September.
    16. Scheaua Fanel Dorel & Goanta Adrian Mihai & Dragan Nicusor, 2021. "Review of Specific Performance Parameters of Vertical Wind Turbine Rotors Based on the SAVONIUS Type," Energies, MDPI, vol. 14(7), pages 1-23, April.
    17. Rahmatian, Mohammad Ali & Nazarian Shahrbabaki, Amin & Moeini, Seyed Peyman, 2023. "Single-objective optimization design of convergent-divergent ducts of ducted wind turbine using RSM and GA, to increase power coefficient of a small-scale horizontal axis wind turbine," Energy, Elsevier, vol. 269(C).
    18. Rezek, Thiago J. & Camacho, Ramiro G.R. & Manzanares-Filho, Nelson, 2023. "A novel methodology for the design of diffuser-augmented hydrokinetic rotors," Renewable Energy, Elsevier, vol. 210(C), pages 524-539.
    19. Zhongqiu Mu & Guoqiang Tong & Zhenjun Xiao & Qingyue Deng & Fang Feng & Yan Li & Garrel Van Arne, 2022. "Study on Aerodynamic Characteristics of a Savonius Wind Turbine with a Modified Blade," Energies, MDPI, vol. 15(18), pages 1-13, September.
    20. Po-Wen Hwang & Jia-Heng Wu & Yuan-Jen Chang, 2024. "Optimization Based on Computational Fluid Dynamics and Machine Learning for the Performance of Diffuser-Augmented Wind Turbines with Inlet Shrouds," Sustainability, MDPI, vol. 16(9), pages 1-31, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:314:y:2025:i:c:s0360544224039355. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.