IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v294y2024ics0360544224005802.html
   My bibliography  Save this article

Surface modified single-step nanofluid for improved CO2 absorption and storage Prospects at pore-scale in micromodels: CO2 utilization for saline porous media

Author

Listed:
  • Shukla, Hari
  • Hembram, Bidesh Kumar
  • Vishal, Vikram
  • Trivedi, Japan
  • Srivastava, Vimal Chandra
  • Sharma, Tushar

Abstract

The utilization (absorption and areal sweep) of injected carbon dioxide (CO2) can be enhanced if a viscous and agglomeration free nanofluid is used as most of the nanoparticles (NPs) prefer to stay in bulk phase rather than adsorbing on CO2 surface. NP adsorption can be improved if non-participating NPs are surface modified with a suitable surface modifying agent e.g., triethoxy (vinyl)silane (TVS). Thus, in this study, single-step approach was used to synthesize agglomeration free TiO2 nanofluid whose surface modification was carried out in varying proportion of TVS (1–5% v/v) followed by the discussion on comparative CO2 absorption and storage performance by different tools such as DLS, IFT, Rheology, Contact-angle, and Micromodel flow. The basic nanofluid (To) showed greater CO2 absorption after surface modification as demonstrated by molality results. However, surface modification also decreased dispersion stability of surface modified nanofluids (T1, T2, and T3) and T2 was regarded as the most stable nanofluid with −64.4 mV (ζ-potential) and 153 nm (NP size). After surface modification, increase in NP size and settlement was higher for surface modified nanofluids than To, which exhibited dispersion stability of 84 d with −53.4 mV and 15 nm. Contact angle results also showed that surface modified nanofluids possess greater affinity for CO2 absorption than basic nanofluid (To). Rheological analysis was also consistent with other tests where viscosity was found dependent on both storage period and temperature, and NP settlement was found to be the most influential parameter on flow properties of nanofluid. Finally, pore scale analysis was performed to understand areal sweep of injected CO2 in micromodel with and without nanofluid, where nanofluid imparted greater CO2 storage by diverting it in un-swept pore networks of micromodel which were untapped by CO2 without nanofluid.

Suggested Citation

  • Shukla, Hari & Hembram, Bidesh Kumar & Vishal, Vikram & Trivedi, Japan & Srivastava, Vimal Chandra & Sharma, Tushar, 2024. "Surface modified single-step nanofluid for improved CO2 absorption and storage Prospects at pore-scale in micromodels: CO2 utilization for saline porous media," Energy, Elsevier, vol. 294(C).
  • Handle: RePEc:eee:energy:v:294:y:2024:i:c:s0360544224005802
    DOI: 10.1016/j.energy.2024.130808
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224005802
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2024.130808?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qi, Run & Li, Zhaohao & Zhang, Hongyuan & Fu, Hongming & Zhang, Heng & Gao, Dan & Chen, Haiping, 2023. "CO2 capture performance of ceramic membrane with superhydrophobic modification based on deposited SiO2 particles," Energy, Elsevier, vol. 283(C).
    2. Chaturvedi, Krishna Raghav & Trivedi, Japan & Sharma, Tushar, 2020. "Single-step silica nanofluid for improved carbon dioxide flow and reduced formation damage in porous media for carbon utilization," Energy, Elsevier, vol. 197(C).
    3. Kim, Seonggon & Ko, Yunmo & Lee, Geun Jeong & Lee, Jae Won & Xu, Ronghuan & Ahn, Hyungseop & Kang, Yong Tae, 2023. "Sustainable energy harvesting from post-combustion CO2 capture using amine-functionalized solvents," Energy, Elsevier, vol. 267(C).
    4. Jung, Wonho & Lee, Jinwon, 2022. "Pseudo counter-current turbulent fluidized bed process with sensible heat recovery for energy-efficient CO2 capture using an amine-functionalized solid sorbent," Energy, Elsevier, vol. 240(C).
    5. Raza, Waseem & Raza, Nadeem & Agbe, Henry & Kumar, R.V. & Kim, Ki-Hyun & Yang, Jianhua, 2018. "Multistep sequestration and storage of CO2 to form valuable products using forsterite," Energy, Elsevier, vol. 155(C), pages 865-873.
    6. Ding, Yudong & Ma, Lijiao & Zeng, Fengqi & Zhao, Xingxing & Wang, Hong & Zhu, Xun & Liao, Qiang, 2023. "Synthesis and CO2 adsorption kinetics of Aluminum Fumarate MOFs pellet with high recovery," Energy, Elsevier, vol. 263(PB).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hou, Lei & Elsworth, Derek & Zhang, Fengshou & Wang, Zhiyuan & Zhang, Jianbo, 2023. "Evaluation of proppant injection based on a data-driven approach integrating numerical and ensemble learning models," Energy, Elsevier, vol. 264(C).
    2. Pandey, Anjanay & Sinha, A.S.K. & Chaturvedi, Krishna Raghav & Sharma, Tushar, 2021. "Experimental investigation on effect of reservoir conditions on stability and rheology of carbon dioxide foams of nonionic surfactant and polymer: Implications of carbon geo-storage," Energy, Elsevier, vol. 235(C).
    3. Yang, Jie & Wei, Yi & Yang, Jing & Xiang, Huaping & Ma, Liping & Zhang, Wei & Wang, Lichun & Peng, Yuhui & Liu, Hongpan, 2019. "Syngas production by chemical looping gasification using Fe supported on phosphogypsum compound oxygen carrier," Energy, Elsevier, vol. 168(C), pages 126-135.
    4. Chen, Hao & Liu, Xiliang & Zhang, Chao & Tan, Xianhong & Yang, Ran & Yang, Shenglai & Yang, Jin, 2022. "Effects of miscible degree and pore scale on seepage characteristics of unconventional reservoirs fluids due to supercritical CO2 injection," Energy, Elsevier, vol. 239(PC).
    5. Ali Telmadarreie & Japan J Trivedi, 2020. "CO 2 Foam and CO 2 Polymer Enhanced Foam for Heavy Oil Recovery and CO 2 Storage," Energies, MDPI, vol. 13(21), pages 1-15, November.
    6. Liu, Ang & Liu, Shimin, 2022. "Mechanical property alterations across coal matrix due to water-CO2 treatments: A micro-to-nano scale experimental study," Energy, Elsevier, vol. 248(C).
    7. Li, Wei & Markides, Christos N. & Zeng, Min & Peng, Jian, 2024. "4E evaluations of salt hydrate-based solar thermochemical heat transformer system used for domestic hot water production," Energy, Elsevier, vol. 286(C).
    8. Chaturvedi, Krishna Raghav & Narukulla, Ramesh & Amani, Mahmood & Sharma, Tushar, 2021. "Experimental investigations to evaluate surfactant role on absorption capacity of nanofluid for CO2 utilization in sustainable crude mobilization," Energy, Elsevier, vol. 225(C).
    9. Liang, Fachun & He, Zhennan & Meng, Jia & Zhao, Jingwen & Yu, Chao, 2023. "Effects of microfracture parameters on adaptive pumping in fractured porous media: Pore-scale simulation," Energy, Elsevier, vol. 263(PC).
    10. Hui Yang & Chengcheng Wang & Lige Tong & Shaowu Yin & Li Wang & Yulong Ding, 2023. "Salt Hydrate Adsorption Material-Based Thermochemical Energy Storage for Space Heating Application: A Review," Energies, MDPI, vol. 16(6), pages 1-54, March.
    11. Singh, Alpana & Sharma, Tushar, 2023. "Implications of sand mobilization on stability and rheological properties of carbon dioxide foam and its transport mechanism in unconsolidated sandstone," Energy, Elsevier, vol. 263(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:294:y:2024:i:c:s0360544224005802. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.