IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v28y2003i1p55-97.html
   My bibliography  Save this article

The theory and practice of energy saving in the chemical industry: some methods for reducing thermodynamic irreversibility in chemical technology processes

Author

Listed:
  • Leites, I.L.
  • Sama, D.A.
  • Lior, N.

Abstract

The causes of thermodynamic irreversibility in chemical reactions and other industrial chemical processes (in particular absorption, stripping, and heat transfer) and ways of reducing energy consumption have been examined. Some thermodynamic principles based on the Second Law of thermodynamics such as the so called “counteraction principle,” “driving force method,” “quasi-static method,” and the result some of practical methods for energy saving design are discussed. It is demonstrated that the possibilities for reducing energy consumption are substantially higher than often seems possible. The correctness and practical effectiveness of the above methods have been confirmed by many commercial examples, for instance the lead author was able to reduce heat consumption in more than 20 commercial CO2 removal installations by changes in networks only, without changing the absorbent. The heat consumption was reduced to about 1/2 to 1/3 of that used with conventional flow sheets.

Suggested Citation

  • Leites, I.L. & Sama, D.A. & Lior, N., 2003. "The theory and practice of energy saving in the chemical industry: some methods for reducing thermodynamic irreversibility in chemical technology processes," Energy, Elsevier, vol. 28(1), pages 55-97.
  • Handle: RePEc:eee:energy:v:28:y:2003:i:1:p:55-97
    DOI: 10.1016/S0360-5442(02)00107-X
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054420200107X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/S0360-5442(02)00107-X?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kestin, Joseph, 1980. "Availability: The concept and associated terminology," Energy, Elsevier, vol. 5(8), pages 679-692.
    2. Szargut, Jan, 1980. "International progress in second law analysis," Energy, Elsevier, vol. 5(8), pages 709-718.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rosen, Marc A. & Dincer, Ibrahim & Kanoglu, Mehmet, 2008. "Role of exergy in increasing efficiency and sustainability and reducing environmental impact," Energy Policy, Elsevier, vol. 36(1), pages 128-137, January.
    2. Rosen, Marc A., 2002. "Assessing energy technologies and environmental impacts with the principles of thermodynamics," Applied Energy, Elsevier, vol. 72(1), pages 427-441, May.
    3. Zhang, Wei & Zhang, Juhua & Xue, Zhengliang, 2017. "Exergy analyses of the oxygen blast furnace with top gas recycling process," Energy, Elsevier, vol. 121(C), pages 135-146.
    4. Bejan, Adrian, 2018. "Thermodynamics today," Energy, Elsevier, vol. 160(C), pages 1208-1219.
    5. Bazooyar, Bahamin & Hosseini, Seyyed Yaghoob & Moradi Ghoje Begloo, Solat & Shariati, Ahmad & Hashemabadi, Seyed Hassan & Shaahmadi, Fariborz, 2018. "Mixed modified Fe2O3-WO3 as new fuel borne catalyst (FBC) for biodiesel fuel," Energy, Elsevier, vol. 149(C), pages 438-453.
    6. Silveira, Jose Luz & Lamas, Wendell de Queiroz & Tuna, Celso Eduardo & Villela, Iraides Aparecida de Castro & Miro, Laura Siso, 2012. "Ecological efficiency and thermoeconomic analysis of a cogeneration system at a hospital," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2894-2906.
    7. Soltanian, Salman & Kalogirou, Soteris A. & Ranjbari, Meisam & Amiri, Hamid & Mahian, Omid & Khoshnevisan, Benyamin & Jafary, Tahereh & Nizami, Abdul-Sattar & Gupta, Vijai Kumar & Aghaei, Siavash & Pe, 2022. "Exergetic sustainability analysis of municipal solid waste treatment systems: A systematic critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    8. Bahman Najafi & Sina Faizollahzadeh Ardabili & Amir Mosavi & Shahaboddin Shamshirband & Timon Rabczuk, 2018. "An Intelligent Artificial Neural Network-Response Surface Methodology Method for Accessing the Optimum Biodiesel and Diesel Fuel Blending Conditions in a Diesel Engine from the Viewpoint of Exergy and," Energies, MDPI, vol. 11(4), pages 1-18, April.
    9. Hepbasli, Arif & Utlu, Zafer & Akdeniz, R. Cengiz, 2007. "Energetic and exergetic aspects of cotton stalk production in establishing energy policies," Energy Policy, Elsevier, vol. 35(5), pages 3015-3024, May.
    10. Rocco, M.V. & Colombo, E. & Sciubba, E., 2014. "Advances in exergy analysis: a novel assessment of the Extended Exergy Accounting method," Applied Energy, Elsevier, vol. 113(C), pages 1405-1420.
    11. Mellino, Salvatore & Ripa, Maddalena & Zucaro, Amalia & Ulgiati, Sergio, 2014. "An emergy–GIS approach to the evaluation of renewable resource flows: A case study of Campania Region, Italy," Ecological Modelling, Elsevier, vol. 271(C), pages 103-112.
    12. Zisopoulos, Filippos K. & Moejes, Sanne N. & Rossier-Miranda, Francisco J. & van der Goot, Atze Jan & Boom, Remko M., 2015. "Exergetic comparison of food waste valorization in industrial bread production," Energy, Elsevier, vol. 82(C), pages 640-649.
    13. Paula Marlene Wenzel & Peter Radgen & Jan Westermeyer, 2021. "Comparing Exergy Analysis and Physical Optimum Method Regarding an Induction Furnace," Energies, MDPI, vol. 14(6), pages 1-18, March.
    14. An, Qier & An, Haizhong & Wang, Lang & Huang, Xuan, 2014. "Structural and regional variations of natural resource production in China based on exergy," Energy, Elsevier, vol. 74(C), pages 67-77.
    15. Frangopoulos, Christos A., 2018. "Recent developments and trends in optimization of energy systems," Energy, Elsevier, vol. 164(C), pages 1011-1020.
    16. Zanchini, Enzo & Terlizzese, Tiziano, 2009. "Molar exergy and flow exergy of pure chemical fuels," Energy, Elsevier, vol. 34(9), pages 1246-1259.
    17. Macmanus Chinenye Ndukwu & Lyes Bennamoun & Merlin Simo-Tagne, 2021. "Reviewing the Exergy Analysis of Solar Thermal Systems Integrated with Phase Change Materials," Energies, MDPI, vol. 14(3), pages 1-26, January.
    18. Efstathios E. Michaelides, 2021. "Thermodynamics, Energy Dissipation, and Figures of Merit of Energy Storage Systems—A Critical Review," Energies, MDPI, vol. 14(19), pages 1-41, September.
    19. Christelle Bou Malham & Assaad Zoughaib & Rodrigo Rivera Tinoco & Thierry Schuhler, 2019. "Hybrid Optimization Methodology (Exergy/Pinch) and Application on a Simple Process," Energies, MDPI, vol. 12(17), pages 1-34, August.
    20. Campos-Celador, Álvaro & Pérez-Iribarren, Estibaliz & Sala, José María & del Portillo-Valdés, Luis Alfonso, 2012. "Thermoeconomic analysis of a micro-CHP installation in a tertiary sector building through dynamic simulation," Energy, Elsevier, vol. 45(1), pages 228-236.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:28:y:2003:i:1:p:55-97. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.