IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v272y2023ics0360544223004401.html
   My bibliography  Save this article

Integrated assessment and optimization of dual environment and production drivers in grinding

Author

Listed:
  • Wang, Jinling
  • Tian, Yebing
  • Hu, Xintao
  • Han, Jinguo
  • Liu, Bing

Abstract

Grinding is a common machining process for efficiently manufacturing high-end products. However, abundant electrical energy is wasted in grinding due to its inefficient use, thus causing economic loss as well as environmental pollution. Although green grinders are evolving, their high investment cost prevents the majority of discrete manufacturers from using them immediately. Optimization of the grinding process is a straightforward and cost-effective alternative, but proper reference parameters are not known for saving energy and reducing pollution. With an attempt to maintain a balance between production and environment, novel parametric models are established for assessment and multi-objective optimization by considering various issues, such as the efficiency of time, the surface quality of product, consumption of energy, recycling and replacement of coolant, exposure of noise hazard, mass of produced dust, and cost of environmental factors. A popular multi-objective optimizer, namely the non-dominated sorting genetic algorithm-II (NSGA-II), is applied for directly obtaining the Pareto front containing the set of optimal trade-off solutions. The experimental results obtained in the case of ceramic grinding show 90% accuracy of the proposed model. An integrated environmental improvement of 200% is achieved by a minor loss of 7.41% within the required range of surface quality.

Suggested Citation

  • Wang, Jinling & Tian, Yebing & Hu, Xintao & Han, Jinguo & Liu, Bing, 2023. "Integrated assessment and optimization of dual environment and production drivers in grinding," Energy, Elsevier, vol. 272(C).
    • Handle: RePEc:eee:energy:v:272:y:2023:i:c:s0360544223004401
    DOI: 10.1016/j.energy.2023.127046
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223004401
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127046?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xiao, Qinge & Li, Congbo & Tang, Ying & Li, Lingling & Li, Li, 2019. "A knowledge-driven method of adaptively optimizing process parameters for energy efficient turning," Energy, Elsevier, vol. 166(C), pages 142-156.
    2. Lotfan, S. & Ghiasi, R. Akbarpour & Fallah, M. & Sadeghi, M.H., 2016. "ANN-based modeling and reducing dual-fuel engine’s challenging emissions by multi-objective evolutionary algorithm NSGA-II," Applied Energy, Elsevier, vol. 175(C), pages 91-99.
    3. Schudeleit, Timo & Züst, Simon & Weiss, Lukas & Wegener, Konrad, 2016. "The Total Energy Efficiency Index for machine tools," Energy, Elsevier, vol. 102(C), pages 682-693.
    4. Shang, Zhendong & Gao, Dong & Jiang, Zhipeng & Lu, Yong, 2019. "Towards less energy intensive heavy-duty machine tools: Power consumption characteristics and energy-saving strategies," Energy, Elsevier, vol. 178(C), pages 263-276.
    5. Khan, A.M. & Liang, L. & Mia, M. & Gupta, M.K. & Wei, Z. & Jamil, M. & Ning, H., 2021. "Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    6. Liu, Wei & Li, Li & Cai, Wei & Li, Congbo & Li, Lingling & Chen, Xingzheng & Sutherland, John W., 2020. "Dynamic characteristics and energy consumption modelling of machine tools based on bond graph theory," Energy, Elsevier, vol. 212(C).
    7. He, Yan & Wu, Pengcheng & Li, Yufeng & Wang, Yulin & Tao, Fei & Wang, Yan, 2020. "A generic energy prediction model of machine tools using deep learning algorithms," Applied Energy, Elsevier, vol. 275(C).
    8. Jia, Shun & Cai, Wei & Liu, Conghu & Zhang, Zhongwei & Bai, Shuowei & Wang, Qiuyan & Li, Shuoshuo & Hu, Luoke, 2021. "Energy modeling and visualization analysis method of drilling processes in the manufacturing industry," Energy, Elsevier, vol. 228(C).
    9. Liu, Peiji & Liu, Fei & Qiu, Hang, 2017. "A novel approach for acquiring the real-time energy efficiency of machine tools," Energy, Elsevier, vol. 121(C), pages 524-532.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xiao, Qinge & Li, Congbo & Tang, Ying & Pan, Jian & Yu, Jun & Chen, Xingzheng, 2019. "Multi-component energy modeling and optimization for sustainable dry gear hobbing," Energy, Elsevier, vol. 187(C).
    2. Cai, Wei & Li, Yanqi & Li, Li & Lai, Kee-hung & Jia, Shun & Xie, Jun & Zhang, Yuanhui & Hu, Luoke, 2022. "Energy saving and high efficiency production oriented forward-and-reverse multidirectional turning: Energy modeling and application," Energy, Elsevier, vol. 252(C).
    3. Jessica Walther & Matthias Weigold, 2021. "A Systematic Review on Predicting and Forecasting the Electrical Energy Consumption in the Manufacturing Industry," Energies, MDPI, vol. 14(4), pages 1-24, February.
    4. Cai, Wei & Liu, Fei & Xie, Jun & Liu, Peiji & Tuo, Junbo, 2017. "A tool for assessing the energy demand and efficiency of machining systems: Energy benchmarking," Energy, Elsevier, vol. 138(C), pages 332-347.
    5. Jia, Shun & Cai, Wei & Liu, Conghu & Zhang, Zhongwei & Bai, Shuowei & Wang, Qiuyan & Li, Shuoshuo & Hu, Luoke, 2021. "Energy modeling and visualization analysis method of drilling processes in the manufacturing industry," Energy, Elsevier, vol. 228(C).
    6. Benjie Li & Hualin Zheng & Xiao Yang & Liang Guo & Binglin Li, 2020. "Energy Optimization for Motorized Spindle System of Machine Tools under Minimum Thermal Effects and Maximum Productivity Constraints," Energies, MDPI, vol. 13(22), pages 1-17, November.
    7. Tangbin Xia & Xiangxin An & Huaqiang Yang & Yimin Jiang & Yuhui Xu & Meimei Zheng & Ershun Pan, 2023. "Efficient Energy Use in Manufacturing Systems—Modeling, Assessment, and Management Strategy," Energies, MDPI, vol. 16(3), pages 1-20, January.
    8. Zhao, Junhua & Li, Li & Li, Lingling & Zhang, Yunfeng & Lin, Jiang & Cai, Wei & Sutherland, John W., 2023. "A multi-dimension coupling model for energy-efficiency of a machining process," Energy, Elsevier, vol. 274(C).
    9. Xiao, Qinge & Li, Congbo & Tang, Ying & Li, Lingling & Li, Li, 2019. "A knowledge-driven method of adaptively optimizing process parameters for energy efficient turning," Energy, Elsevier, vol. 166(C), pages 142-156.
    10. Liu, Wei & Li, Li & Cai, Wei & Li, Congbo & Li, Lingling & Chen, Xingzheng & Sutherland, John W., 2020. "Dynamic characteristics and energy consumption modelling of machine tools based on bond graph theory," Energy, Elsevier, vol. 212(C).
    11. Tuo, Junbo & Liu, Fei & Liu, Peiji & Zhang, Hua & Cai, Wei, 2018. "Energy efficiency evaluation for machining systems through virtual part," Energy, Elsevier, vol. 159(C), pages 172-183.
    12. Tatiana N. Ivanova & Witold Biały & Aleksander I. Korshunov & Jerzy Jura & Krzysztof Kaczmarczyk & Krzysztof Turczyński, 2022. "Increasing Energy Efficiency in Well Drilling," Energies, MDPI, vol. 15(5), pages 1-16, March.
    13. Shun Jia & Qingwen Yuan & Wei Cai & Qinghe Yuan & Conghu Liu & Jingxiang Lv & Zhongwei Zhang, 2018. "Establishment of an Improved Material-Drilling Power Model to Support Energy Management of Drilling Processes," Energies, MDPI, vol. 11(8), pages 1-16, August.
    14. Jing Tian & Dedi Liu & Shenglian Guo & Zhengke Pan & Xingjun Hong, 2019. "Impacts of Inter-Basin Water Transfer Projects on Optimal Water Resources Allocation in the Hanjiang River Basin, China," Sustainability, MDPI, vol. 11(7), pages 1-19, April.
    15. Hu, Luoke & Peng, Chen & Evans, Steve & Peng, Tao & Liu, Ying & Tang, Renzhong & Tiwari, Ashutosh, 2017. "Minimising the machining energy consumption of a machine tool by sequencing the features of a part," Energy, Elsevier, vol. 121(C), pages 292-305.
    16. He, Shaokun & Guo, Shenglian & Yin, Jiabo & Liao, Zhen & Li, He & Liu, Zhangjun, 2022. "A novel impoundment framework for a mega reservoir system in the upper Yangtze River basin," Applied Energy, Elsevier, vol. 305(C).
    17. Shang, Zhendong & Gao, Dong & Jiang, Zhipeng & Lu, Yong, 2019. "Towards less energy intensive heavy-duty machine tools: Power consumption characteristics and energy-saving strategies," Energy, Elsevier, vol. 178(C), pages 263-276.
    18. Bolu, Sencer & Ozgul, Emre & Epguzel, Emre & Gurel, Cetin, 2022. "Use of thermodynamic models for compression ratio and peak firing pressure optimization in heavy-duty diesel engine," Energy, Elsevier, vol. 248(C).
    19. Cai, Wei & Wang, Lianguo & Li, Li & Xie, Jun & Jia, Shun & Zhang, Xugang & Jiang, Zhigang & Lai, Kee-hung, 2022. "A review on methods of energy performance improvement towards sustainable manufacturing from perspectives of energy monitoring, evaluation, optimization and benchmarking," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    20. Rosato, Antonello & Panella, Massimo & Andreotti, Amedeo & Mohammed, Osama A. & Araneo, Rodolfo, 2021. "Two-stage dynamic management in energy communities using a decision system based on elastic net regularization," Applied Energy, Elsevier, vol. 291(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:272:y:2023:i:c:s0360544223004401. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.