IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipes0360544222027943.html
   My bibliography  Save this article

Parametric optimisation and thermo-economic analysis of Joule–Brayton cycle-based pumped thermal electricity storage system under various charging–discharging periods

Author

Listed:
  • Zhang, Han
  • Wang, Liang
  • Lin, Xipeng
  • Chen, Haisheng

Abstract

The Joule–Brayton cycle-based pumped thermal electricity storage (PTES) system has a simple structure, high energy density, and geographical independence, which has broad application prospects. This study carried out multi-dimensional optimisation, detailed loss and thermo-economic performance analyses for PTES systems with charging–discharging duration ratios in the range of 1:3–3:1. The reservoirs' length-to-diameter and discharge compression ratios were optimised. An uncertainty analysis of the capital cost and levelised cost of storage (LCOS) was performed. The results indicate that with an increase in the charging/discharging duration, the optimal length-to-diameter ratio of cold reservoir increases, which of hot reservoir initially increases, then shifts to decreasing. For systems with the same storage capacity, longer charging/discharging duration will achieve better economic performance. The highest round-trip efficiency of 70.97% and lowest LCOS of 0.190 ± 0.043 $/kWh can be achieved for a 60-MWh PTES system. LCOS decreases significantly with the increase of installed capacity. The peak and valley hours should be fully utilised to obtain the best techno-economic performance. The abovementioned optimisation and analysis based on the exergy method provides a theoretical basis for the design and application of the Brayton-cycle-based PTES system.

Suggested Citation

  • Zhang, Han & Wang, Liang & Lin, Xipeng & Chen, Haisheng, 2023. "Parametric optimisation and thermo-economic analysis of Joule–Brayton cycle-based pumped thermal electricity storage system under various charging–discharging periods," Energy, Elsevier, vol. 263(PE).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222027943
    DOI: 10.1016/j.energy.2022.125908
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222027943
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125908?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Graves, Frank & Jenkin, Thomas & Murphy, Dean, 1999. "Opportunities for Electricity Storage in Deregulating Markets," The Electricity Journal, Elsevier, vol. 12(8), pages 46-56, October.
    2. Georgiou, Solomos & Shah, Nilay & Markides, Christos N., 2018. "A thermo-economic analysis and comparison of pumped-thermal and liquid-air electricity storage systems," Applied Energy, Elsevier, vol. 226(C), pages 1119-1133.
    3. White, Alexander J., 2011. "Loss analysis of thermal reservoirs for electrical energy storage schemes," Applied Energy, Elsevier, vol. 88(11), pages 4150-4159.
    4. Morandin, Matteo & Maréchal, François & Mercangöz, Mehmet & Buchter, Florian, 2012. "Conceptual design of a thermo-electrical energy storage system based on heat integration of thermodynamic cycles – Part B: Alternative system configurations," Energy, Elsevier, vol. 45(1), pages 386-396.
    5. Zhao, Yongliang & Song, Jian & Liu, Ming & Zhao, Yao & Olympios, Andreas V. & Sapin, Paul & Yan, Junjie & Markides, Christos N., 2022. "Thermo-economic assessments of pumped-thermal electricity storage systems employing sensible heat storage materials," Renewable Energy, Elsevier, vol. 186(C), pages 431-456.
    6. Zhang, Han & Wang, Liang & Lin, Xipeng & Chen, Haisheng, 2022. "Technical and economic analysis of Brayton-cycle-based pumped thermal electricity storage systems with direct and indirect thermal energy storage," Energy, Elsevier, vol. 239(PC).
    7. Jülch, Verena, 2016. "Comparison of electricity storage options using levelized cost of storage (LCOS) method," Applied Energy, Elsevier, vol. 183(C), pages 1594-1606.
    8. Kim, Young-Min & Shin, Dong-Gil & Lee, Sun-Youp & Favrat, Daniel, 2013. "Isothermal transcritical CO2 cycles with TES (thermal energy storage) for electricity storage," Energy, Elsevier, vol. 49(C), pages 484-501.
    9. Baik, Young-Jin & Heo, Jaehyeok & Koo, Junemo & Kim, Minsung, 2014. "The effect of storage temperature on the performance of a thermo-electric energy storage using a transcritical CO2 cycle," Energy, Elsevier, vol. 75(C), pages 204-215.
    10. Guo, Juncheng & Cai, Ling & Chen, Jincan & Zhou, Yinghui, 2016. "Performance evaluation and parametric choice criteria of a Brayton pumped thermal electricity storage system," Energy, Elsevier, vol. 113(C), pages 693-701.
    11. Morandin, Matteo & Maréchal, François & Mercangöz, Mehmet & Buchter, Florian, 2012. "Conceptual design of a thermo-electrical energy storage system based on heat integration of thermodynamic cycles – Part A: Methodology and base case," Energy, Elsevier, vol. 45(1), pages 375-385.
    12. Steinmann, W.D., 2014. "The CHEST (Compressed Heat Energy STorage) concept for facility scale thermo mechanical energy storage," Energy, Elsevier, vol. 69(C), pages 543-552.
    13. Obi, Manasseh & Jensen, S.M. & Ferris, Jennifer B. & Bass, Robert B., 2017. "Calculation of levelized costs of electricity for various electrical energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 908-920.
    14. Mercangöz, Mehmet & Hemrle, Jaroslav & Kaufmann, Lilian & Z’Graggen, Andreas & Ohler, Christian, 2012. "Electrothermal energy storage with transcritical CO2 cycles," Energy, Elsevier, vol. 45(1), pages 407-415.
    15. Guo, Juncheng & Cai, Ling & Chen, Jincan & Zhou, Yinghui, 2016. "Performance optimization and comparison of pumped thermal and pumped cryogenic electricity storage systems," Energy, Elsevier, vol. 106(C), pages 260-269.
    16. Wang, Liang & Lin, Xipeng & Zhang, Han & Peng, Long & Chen, Haisheng, 2021. "Brayton-cycle-based pumped heat electricity storage with innovative operation mode of thermal energy storage array," Applied Energy, Elsevier, vol. 291(C).
    17. Zhang, Yanchao & Xie, Zhenzhen, 2022. "Thermodynamic efficiency and bounds of pumped thermal electricity storage under whole process ecological optimization," Renewable Energy, Elsevier, vol. 188(C), pages 711-720.
    18. McTigue, Joshua D. & White, Alexander J. & Markides, Christos N., 2015. "Parametric studies and optimisation of pumped thermal electricity storage," Applied Energy, Elsevier, vol. 137(C), pages 800-811.
    19. Wang, Liang & Lin, Xipeng & Chai, Lei & Peng, Long & Yu, Dong & Chen, Haisheng, 2019. "Cyclic transient behavior of the Joule–Brayton based pumped heat electricity storage: Modeling and analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 523-534.
    20. Sciacovelli, Adriano & Li, Yongliang & Chen, Haisheng & Wu, Yuting & Wang, Jihong & Garvey, Seamus & Ding, Yulong, 2017. "Dynamic simulation of Adiabatic Compressed Air Energy Storage (A-CAES) plant with integrated thermal storage – Link between components performance and plant performance," Applied Energy, Elsevier, vol. 185(P1), pages 16-28.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ai, Wei & Wang, Liang & Lin, Xipeng & Zhang, Shuang & Bai, Yakai & Chen, Haisheng, 2023. "Mathematical and thermo-economic analysis of thermal insulation for thermal energy storage applications," Renewable Energy, Elsevier, vol. 213(C), pages 233-245.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Yongliang & Song, Jian & Liu, Ming & Zhao, Yao & Olympios, Andreas V. & Sapin, Paul & Yan, Junjie & Markides, Christos N., 2022. "Thermo-economic assessments of pumped-thermal electricity storage systems employing sensible heat storage materials," Renewable Energy, Elsevier, vol. 186(C), pages 431-456.
    2. Zhang, Han & Wang, Liang & Lin, Xipeng & Chen, Haisheng, 2023. "Operating mode of Brayton-cycle-based pumped thermal electricity storage system: Constant compression ratio or constant rotational speed?," Applied Energy, Elsevier, vol. 343(C).
    3. Zhang, Han & Wang, Liang & Lin, Xipeng & Chen, Haisheng, 2022. "Technical and economic analysis of Brayton-cycle-based pumped thermal electricity storage systems with direct and indirect thermal energy storage," Energy, Elsevier, vol. 239(PC).
    4. Liang, Ting & Vecchi, Andrea & Knobloch, Kai & Sciacovelli, Adriano & Engelbrecht, Kurt & Li, Yongliang & Ding, Yulong, 2022. "Key components for Carnot Battery: Technology review, technical barriers and selection criteria," Renewable and Sustainable Energy Reviews, Elsevier, vol. 163(C).
    5. Frate, Guido Francesco & Ferrari, Lorenzo & Desideri, Umberto, 2021. "Energy storage for grid-scale applications: Technology review and economic feasibility analysis," Renewable Energy, Elsevier, vol. 163(C), pages 1754-1772.
    6. Wang, Liang & Lin, Xipeng & Zhang, Han & Peng, Long & Chen, Haisheng, 2021. "Brayton-cycle-based pumped heat electricity storage with innovative operation mode of thermal energy storage array," Applied Energy, Elsevier, vol. 291(C).
    7. Alberto Benato & Francesco De Vanna & Anna Stoppato, 2022. "Levelling the Photovoltaic Power Profile with the Integrated Energy Storage System," Energies, MDPI, vol. 15(24), pages 1-21, December.
    8. Guo, Juncheng & Cai, Ling & Chen, Jincan & Zhou, Yinghui, 2016. "Performance evaluation and parametric choice criteria of a Brayton pumped thermal electricity storage system," Energy, Elsevier, vol. 113(C), pages 693-701.
    9. Abarr, Miles & Geels, Brendan & Hertzberg, Jean & Montoya, Lupita D., 2017. "Pumped thermal energy storage and bottoming system part A: Concept and model," Energy, Elsevier, vol. 120(C), pages 320-331.
    10. Zhang, Han & Wang, Liang & Lin, Xipeng & Chen, Haisheng, 2020. "Combined cooling, heating, and power generation performance of pumped thermal electricity storage system based on Brayton cycle," Applied Energy, Elsevier, vol. 278(C).
    11. Steinmann, Wolf-Dieter, 2017. "Thermo-mechanical concepts for bulk energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 205-219.
    12. Ameen, Muhammad Tahir & Ma, Zhiwei & Smallbone, Andrew & Norman, Rose & Roskilly, Anthony Paul, 2023. "Demonstration system of pumped heat energy storage (PHES) and its round-trip efficiency," Applied Energy, Elsevier, vol. 333(C).
    13. Wang, Liang & Lin, Xipeng & Chai, Lei & Peng, Long & Yu, Dong & Chen, Haisheng, 2019. "Cyclic transient behavior of the Joule–Brayton based pumped heat electricity storage: Modeling and analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 523-534.
    14. Yang, He & Li, Jinduo & Ge, Zhihua & Yang, Lijun & Du, Xiaoze, 2022. "Dynamic characteristics and control strategy of pumped thermal electricity storage with reversible Brayton cycle," Renewable Energy, Elsevier, vol. 198(C), pages 1341-1353.
    15. Xue, X.J. & Zhao, C.Y., 2023. "Transient behavior and thermodynamic analysis of Brayton-like pumped-thermal electricity storage based on packed-bed latent heat/cold stores," Applied Energy, Elsevier, vol. 329(C).
    16. Yang, He & Li, Jinduo & Ge, Zhihua & Yang, Lijun & Du, Xiaoze, 2023. "Dynamic performance for discharging process of pumped thermal electricity storage with reversible Brayton cycle," Energy, Elsevier, vol. 263(PD).
    17. Baik, Young-Jin & Heo, Jaehyeok & Koo, Junemo & Kim, Minsung, 2014. "The effect of storage temperature on the performance of a thermo-electric energy storage using a transcritical CO2 cycle," Energy, Elsevier, vol. 75(C), pages 204-215.
    18. Zhang, Yuan & Yang, Ke & Hong, Hui & Zhong, Xiaohui & Xu, Jianzhong, 2016. "Thermodynamic analysis of a novel energy storage system with carbon dioxide as working fluid," Renewable Energy, Elsevier, vol. 99(C), pages 682-697.
    19. Jockenhöfer, Henning & Steinmann, Wolf-Dieter & Bauer, Dan, 2018. "Detailed numerical investigation of a pumped thermal energy storage with low temperature heat integration," Energy, Elsevier, vol. 145(C), pages 665-676.
    20. Benato, Alberto, 2017. "Performance and cost evaluation of an innovative Pumped Thermal Electricity Storage power system," Energy, Elsevier, vol. 138(C), pages 419-436.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222027943. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.