IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipcs0360544222027335.html

Gas utilization optimization and exergy analysis of hydrogen metallurgical shaft furnace

Author

Listed:
  • Qiu, Ziyang
  • Yue, Qiang
  • Yan, Tianyi
  • Wang, Qi
  • Sun, Jingchao
  • Yuan, Yuxing
  • Che, Zichang
  • Wang, Yisong
  • Du, Tao

Abstract

For the objective of carbon neutrality stated by the global climate conference, the iron and steel industry, a major carbon emitter, must transition to green and low-carbon development as quickly as feasible. Hydrogen metallurgy direct reduction technology has attracted much attention because of its low emission. However, the current study on hydrogen metallurgy shaft furnace lacks a comprehensive in-depth analysis of gas consumption, gas utilization, and exergy intensity. To tackle these problems, a material and energy optimization model including intermolecular chemical reaction is established. The original process is optimized by this model, the gas utilization is enhanced by 26.7%, gas consumption is decreased by 906.34 m3/t-DRI, and exergy intensity is reduced by 8.8 GJ/t-DRI. Furthermore, the impacts of gas composition, gas temperature, and ore temperature on gas consumption, gas utilization, exergy structure, and exergy intensity, as well as their interactions, are investigated thoroughly. The analysis highlighted that properly reducing hydrogen content and increasing gas and ore temperature can improve gas utilization and reduce gas consumption. Simultaneously, lowering gas consumption can effectively lower exergy intensity. And furnace top gas exergy is closely related to gas utilization. On the whole, it is advantageous to promote the development of hydrogen metallurgy by conducting in-depth and systematic analyses.

Suggested Citation

  • Qiu, Ziyang & Yue, Qiang & Yan, Tianyi & Wang, Qi & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Du, Tao, 2023. "Gas utilization optimization and exergy analysis of hydrogen metallurgical shaft furnace," Energy, Elsevier, vol. 263(PC).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pc:s0360544222027335
    DOI: 10.1016/j.energy.2022.125847
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222027335
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125847?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Kirschen, Marcus & Badr, Karim & Pfeifer, Herbert, 2011. "Influence of direct reduced iron on the energy balance of the electric arc furnace in steel industry," Energy, Elsevier, vol. 36(10), pages 6146-6155.
    2. Liu, Xiong & Chen, Lingen & Qin, Xiaoyong & Sun, Fengrui, 2015. "Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows," Energy, Elsevier, vol. 93(P1), pages 10-19.
    3. Ahmadi, Gholamreza & Toghraie, Davood & Akbari, Omidali, 2019. "Energy, exergy and environmental (3E) analysis of the existing CHP system in a petrochemical plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 99(C), pages 234-242.
    4. Song, Dan & Lin, Ling & Wu, Ye, 2019. "Extended exergy accounting for a typical cement industry in China," Energy, Elsevier, vol. 174(C), pages 678-686.
    5. Na, Hongming & Sun, Jingchao & Qiu, Ziyang & Yuan, Yuxing & Du, Tao, 2022. "Optimization of energy efficiency, energy consumption and CO2 emission in typical iron and steel manufacturing process," Energy, Elsevier, vol. 257(C).
    6. Zhang, Hanxin & Sun, Wenqiang & Li, Weidong & Ma, Guangyu, 2022. "A carbon flow tracing and carbon accounting method for exploring CO2 emissions of the iron and steel industry: An integrated material–energy–carbon hub," Applied Energy, Elsevier, vol. 309(C).
    7. Abhinav Bhaskar & Mohsen Assadi & Homam Nikpey Somehsaraei, 2020. "Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen," Energies, MDPI, vol. 13(3), pages 1-23, February.
    8. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    9. Junfeng Zhang & Jianxu Liu & Jing Li & Yuyan Gao & Chuansong Zhao, 2021. "Green Development Efficiency and Its Influencing Factors in China’s Iron and Steel Industry," Sustainability, MDPI, vol. 13(2), pages 1-15, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ji, Qiang & Cheng, Lin & Zhou, Yue & Liang, Zeng & Shi, Fashun & Zhang, Jianliang & Li, Kejiang, 2025. "Energy-carbon comprehensive efficiency evaluation of a hydrogen metallurgy system with low-temperature waste heat recovery," Applied Energy, Elsevier, vol. 401(PA).
    2. Qiu, Ziyang & Sun, Jingchao & Du, Tao & Na, Hongming & Zhang, Lei & Yuan, Yuxing & Wang, Yisong, 2024. "Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis," Applied Energy, Elsevier, vol. 356(C).
    3. Chen, Jingwei & Huang, Yizhen & Liu, Yang & Jiaqiang, E., 2024. "System development and thermodynamic performance analysis of a system integrating supercritical water gasification of black liquor with direct-reduced iron process," Energy, Elsevier, vol. 295(C).
    4. Chen, Junwen & Gong, Qingshan & Cao, Zhanlong & Liu, Min & Xie, Minchao & Zhao, Gang, 2025. "Three-layer design and optimization of CO2 emission reduction in the iron and steel industry based on ‘BRL’ industrial metabolism," Energy, Elsevier, vol. 315(C).
    5. Chen, Xiangxiang & Sun, Zhuang & Kuo, Po-Chih & Aziz, Muhammad, 2024. "Thermodynamics analysis of innovative carbon-negative systems for direct reduction of iron ore via chemical looping technology," Energy, Elsevier, vol. 309(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yuan, Yuxing & Na, Hongming & Chen, Chuang & Qiu, Ziyang & Sun, Jingchao & Zhang, Lei & Du, Tao & Yang, Yuhang, 2024. "Status, challenges, and prospects of energy efficiency improvement methods in steel production: A multi-perspective review," Energy, Elsevier, vol. 304(C).
    2. Yuan, Yuxing & Na, Hongming & Du, Tao & Qiu, Ziyang & Sun, Jingchao & Yan, Tianyi & Che, Zichang, 2023. "Multi-objective optimization and analysis of material and energy flows in a typical steel plant," Energy, Elsevier, vol. 263(PD).
    3. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Che, Zichang & Qiu, Ziyang & Yuan, Yuxing & Li, Yingnan & Du, Tao & Song, Yanli & Fang, Xin, 2022. "Cost-benefit assessment of manufacturing system using comprehensive value flow analysis," Applied Energy, Elsevier, vol. 310(C).
    4. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    5. Chen, Jingwei & Huang, Yizhen & Liu, Yang & Jiaqiang, E., 2024. "System development and thermodynamic performance analysis of a system integrating supercritical water gasification of black liquor with direct-reduced iron process," Energy, Elsevier, vol. 295(C).
    6. Qiu, Ziyang & Du, Tao & Yue, Qiang & Na, Hongming & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Li, Yingnan, 2023. "A multi-parameters evaluation on exergy for hydrogen metallurgy," Energy, Elsevier, vol. 281(C).
    7. Qiu, Ziyang & Sun, Jingchao & Du, Tao & Na, Hongming & Zhang, Lei & Yuan, Yuxing & Wang, Yisong, 2024. "Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis," Applied Energy, Elsevier, vol. 356(C).
    8. Zichao Wei & Kai Xue & Guangwen Hu & Yufeng Wu & Yanfen Wang, 2024. "The Decarbonizing Strategies of China’s Iron and Steelmaking Industry: A Comprehensive Perspective," Sustainability, MDPI, vol. 16(24), pages 1-21, December.
    9. Wang, Xiaoyang & Yu, Biying & An, Runying & Sun, Feihu & Xu, Shuo, 2022. "An integrated analysis of China’s iron and steel industry towards carbon neutrality," Applied Energy, Elsevier, vol. 322(C).
    10. Preis, Philipp, 2023. "Turning German Steel Production Green: Quantifying Diffusion Scenarios for Hydrogen-Based Steelmaking and Policy Implications," Junior Management Science (JUMS), Junior Management Science e. V., vol. 8(3), pages 682-716.
    11. Julian Suer & Marzia Traverso & Nils Jäger, 2022. "Review of Life Cycle Assessments for Steel and Environmental Analysis of Future Steel Production Scenarios," Sustainability, MDPI, vol. 14(21), pages 1-22, October.
    12. Chen, Junwen & Gong, Qingshan & Cao, Zhanlong & Liu, Min & Xie, Minchao & Zhao, Gang, 2025. "Three-layer design and optimization of CO2 emission reduction in the iron and steel industry based on ‘BRL’ industrial metabolism," Energy, Elsevier, vol. 315(C).
    13. Na, Hongming & Sun, Jingchao & Qiu, Ziyang & Yuan, Yuxing & Du, Tao, 2022. "Optimization of energy efficiency, energy consumption and CO2 emission in typical iron and steel manufacturing process," Energy, Elsevier, vol. 257(C).
    14. Peng, Yuankai & Hu, Zhili & Hua, Lin & Wang, Rui & Qin, Xunpeng & Huang, Mingwei, 2025. "A hybrid physical information deep learning framework for energy consumption forecasting of forging heating furnace," Energy, Elsevier, vol. 340(C).
    15. Zhang, Yujie & Yue, Qiang & Wang, Huanyu & Wang, Heming & Du, Tao & Wang, Qi & Ji, Wei, 2025. "Analysis of carbon emission and energy consumption transfer characteristics of China's iron and steel industry," Energy, Elsevier, vol. 318(C).
    16. Kuang, Yucen & Jiang, Tao & Wu, Longqi & Liu, Xiaoqian & Yang, Xuke & Sher, Farooq & Wei, Zhifang & Zhang, Shengfu, 2023. "High-temperature rheological behavior and non-isothermal pyrolysis mechanism of macerals separated from different coals," Energy, Elsevier, vol. 277(C).
    17. Hu, Xueyue & Wang, Chunying & Elshkaki, Ayman, 2024. "Material-energy Nexus: A systematic literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    18. Zhang, Wei & Zhang, Juhua & Xue, Zhengliang, 2017. "Exergy analyses of the oxygen blast furnace with top gas recycling process," Energy, Elsevier, vol. 121(C), pages 135-146.
    19. Maruf, Md. Nasimul Islam, 2021. "Open model-based analysis of a 100% renewable and sector-coupled energy system–The case of Germany in 2050," Applied Energy, Elsevier, vol. 288(C).
    20. Qiang Yue & Xicui Chai & Yujie Zhang & Qi Wang & Heming Wang & Feng Zhao & Wei Ji & Yuqi Lu, 2023. "Analysis of iron and steel production paths on the energy demand and carbon emission in China’s iron and steel industry," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(5), pages 4065-4085, May.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pc:s0360544222027335. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.