IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v218y2021ics0360544220325056.html
   My bibliography  Save this article

Co-pyrolysis of textile dyeing sludge and red wood waste in a continuously operated auger reactor under microwave irradiation

Author

Listed:
  • Zhou, Chunbao
  • Zhang, Yingwen
  • Liu, Yang
  • Deng, Zeyu
  • Li, Xiangtong
  • Wang, Long
  • Dai, Jianjun
  • Song, Yongmeng
  • Jiang, Zhihui
  • Qu, Junshen
  • Siyal, Asif Ali

Abstract

The eco-friendly disposal of textile dyeing sludge (TDS) has become a worldwide environmental issue due to their complexity and toxicity. In this study, co-pyrolysis of TDS and red wood waste (RWW) in a continuously operated auger reactor under microwave irradiation was investigated, which was more environmentally friendly and created higher value added products. Effects of pyrolysis temperature and RWW ratio were studied to evaluate product distribution and properties. Increase of temperature and RWW ratio resulted in decrease in char yield and increase in gas yield. The contents of CO, CH4, and H2 increased significantly with RWW ratio increased at 650 °C. The content of pyridines, amines, and nitriles enhanced sharply with increasing temperature from 450 to 750 °C. Co-pyrolysis promoted the Maillard reaction and cracking of nitrogen-containing pigments, forming large quantities of N-heterocyclics in bio-oil. Sludge char obtained by pyrolysis of TDS at 650 °C had a greater sulfur retention ability than chars from co-pyrolysis. The highest methylene blue number (372.25 mg/g) and iodine adsorption value (332.42 mg/g) were achieved from TDS and biochar (750 °C, 30 wt% RWW ratio), respectively. Fe(III) in Fe2O3 was reduced to Fe(II) in Fe3O4 and further partially reduced to metallic Fe in biochar.

Suggested Citation

  • Zhou, Chunbao & Zhang, Yingwen & Liu, Yang & Deng, Zeyu & Li, Xiangtong & Wang, Long & Dai, Jianjun & Song, Yongmeng & Jiang, Zhihui & Qu, Junshen & Siyal, Asif Ali, 2021. "Co-pyrolysis of textile dyeing sludge and red wood waste in a continuously operated auger reactor under microwave irradiation," Energy, Elsevier, vol. 218(C).
    • Handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220325056
    DOI: 10.1016/j.energy.2020.119398
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220325056
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119398?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Huang, Yu-Fong & Shih, Chun-Hao & Chiueh, Pei-Te & Lo, Shang-Lien, 2015. "Microwave co-pyrolysis of sewage sludge and rice straw," Energy, Elsevier, vol. 87(C), pages 638-644.
    2. Liu, Yang & Ran, Chunmei & Siddiqui, Azka R. & Siyal, Asif Ali & Song, Yongmeng & Dai, Jianjun & Chtaeva, Polina & Fu, Jie & Ao, Wenya & Deng, Zeyu & Jiang, Zhihui & Zhang, Tianhao, 2020. "Characterization and analysis of sludge char prepared from bench-scale fluidized bed pyrolysis of sewage sludge," Energy, Elsevier, vol. 200(C).
    3. Ran, Chunmei & Liu, Yang & Siddiqui, Azka Rizwana & Siyal, Asif Ali & Mao, Xiao & Kang, Qinhao & Fu, Jie & Ao, Wenya & Dai, Jianjun, 2019. "Pyrolysis of textile dyeing sludge in fluidized bed and microwave-assisted auger reactor: Comparison, migration and distribution of heavy metals," Energy, Elsevier, vol. 182(C), pages 337-348.
    4. Mao, Xiao & Kang, Qinhao & Liu, Yang & Siyal, Asif Ali & Ao, Wenya & Ran, Chunmei & Fu, Jie & Deng, Zeyu & Song, Yongmeng & Dai, Jianjun, 2019. "Microwave-assisted pyrolysis of furfural residue in a continuously operated auger reactor: Biochar characterization and analysis," Energy, Elsevier, vol. 168(C), pages 573-584.
    5. Liu, Yang & Ran, Chunmei & Siddiqui, Azka R. & Mao, Xiao & Kang, Qinhao & Fu, Jie & Deng, Zeyu & Song, Yongmeng & Jiang, Zhihui & Zhang, Tianhao & Ao, Wenya & Dai, Jianjun, 2018. "Pyrolysis of textile dyeing sludge in fluidized bed: Characterization and analysis of pyrolysis products," Energy, Elsevier, vol. 165(PA), pages 720-730.
    6. Yao, Xiwen & Zhao, Zhicheng & Chen, Shoukun & Zhou, Haodong & Xu, Kaili, 2020. "Migration and transformation behaviours of ash residues from a typical fixed-bed gasification station for biomass syngas production in China," Energy, Elsevier, vol. 201(C).
    7. Yao, Xiwen & Zhou, Haodong & Xu, Kaili & Xu, Qingwei & Li, Li, 2020. "Investigation on the fusion characterization and melting kinetics of ashes from co-firing of anthracite and pine sawdust," Renewable Energy, Elsevier, vol. 145(C), pages 835-846.
    8. Collard, François-Xavier & Blin, Joël, 2014. "A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 594-608.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liaqat Ali & Arkom Palamanit & Kuaanan Techato & Asad Ullah & Md. Shahariar Chowdhury & Khamphe Phoungthong, 2022. "Characteristics of Biochars Derived from the Pyrolysis and Co-Pyrolysis of Rubberwood Sawdust and Sewage Sludge for Further Applications," Sustainability, MDPI, vol. 14(7), pages 1-21, March.
    2. Fan, Liangliang & Liu, Lei & Xiao, Zhiguo & Su, Zheyang & Huang, Pei & Peng, Hongyu & Lv, Sen & Jiang, Haiwei & Ruan, Roger & Chen, Paul & Zhou, Wenguang, 2021. "Comparative study of continuous-stirred and batch microwave pyrolysis of linear low-density polyethylene in the presence/absence of HZSM-5," Energy, Elsevier, vol. 228(C).
    3. Luo, Juan & Ma, Rui & Lin, Junhao & Sun, Shichang & Gong, Guojin & Sun, Jiaman & Chen, Yi & Ma, Ning, 2023. "Review of microwave pyrolysis of sludge to produce high quality biogas: Multi-perspectives process optimization and critical issues proposal," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yao, Xiwen & Zhao, Zhicheng & Xu, Kaili & Zhou, Haodong, 2020. "Determination of ash forming characteristics and fouling/slagging behaviours during gasification of masson pine in a fixed-bed gasifier," Renewable Energy, Elsevier, vol. 160(C), pages 1420-1430.
    2. Zhang, Yingwen & Zhou, Chunbao & Liu, Yang & Zhang, Tianhao & Li, Xiangtong & Wang, Long & Dai, Jianjun & Qu, Junshen & Zhang, Changfa & Yu, Mengyan & Yuan, Yanxin & Jin, Yajie & Yu, Hejie & Fu, Jie, 2022. "Product characteristics and potential energy recovery for microwave assisted pyrolysis of waste printed circuit boards in a continuously operated auger pyrolyser," Energy, Elsevier, vol. 239(PD).
    3. Fu, Jie & Mao, Xiao & Siyal, Asif Ali & Liu, Yang & Ao, Wenya & Liu, Guangqing & Dai, Jianjun, 2021. "Pyrolysis of furfural residue pellets: Physicochemical characteristics of pyrolytic pellets and pyrolysis kinetics," Renewable Energy, Elsevier, vol. 179(C), pages 2136-2146.
    4. Liu, Yang & Song, Yongmeng & Ran, Chunmei & Siyal, Asif Ali & Chtaeva, Polina & Dai, Jianjun & Jiang, Zhihui & Deng, Zeyu & Zhang, Tianhao & Ao, Wenya & Fu, Jie, 2020. "Pyrolysis of furfural residue in a bubbling fluidized bed reactor: Biochar characterization and analysis," Energy, Elsevier, vol. 211(C).
    5. Mohsin Raza & Abrar Inayat & Ashfaq Ahmed & Farrukh Jamil & Chaouki Ghenai & Salman R. Naqvi & Abdallah Shanableh & Muhammad Ayoub & Ammara Waris & Young-Kwon Park, 2021. "Progress of the Pyrolyzer Reactors and Advanced Technologies for Biomass Pyrolysis Processing," Sustainability, MDPI, vol. 13(19), pages 1-42, October.
    6. Chen, Wei-Hsin & Lin, Bo-Jhih, 2016. "Characteristics of products from the pyrolysis of oil palm fiber and its pellets in nitrogen and carbon dioxide atmospheres," Energy, Elsevier, vol. 94(C), pages 569-578.
    7. Yao, Xiwen & Zheng, Yan & Zhou, Haodong & Xu, Kaili & Xu, Qingwei & Li, Li, 2020. "Effects of biomass blending, ashing temperature and potassium addition on ash sintering behaviour during co-firing of pine sawdust with a Chinese anthracite," Renewable Energy, Elsevier, vol. 147(P1), pages 2309-2320.
    8. Yang, Yuhan & Wang, Tiancheng & Hu, Hongyun & Yao, Dingding & Zou, Chan & Xu, Kai & Li, Xian & Yao, Hong, 2021. "Influence of partial components removal on pyrolysis behavior of lignocellulosic biowaste in molten salts," Renewable Energy, Elsevier, vol. 180(C), pages 616-625.
    9. Huang, Shengxiong & Lei, Can & Qin, Jie & Yi, Cheng & Chen, Tao & Yao, Lingling & Li, Bo & Wen, Yujiao & Zhou, Zhi & Xia, Mao, 2022. "Properties, kinetics and pyrolysis products distribution of oxidative torrefied camellia shell in different oxygen concentration," Energy, Elsevier, vol. 251(C).
    10. Jun Sheng Teh & Yew Heng Teoh & Heoy Geok How & Thanh Danh Le & Yeoh Jun Jie Jason & Huu Tho Nguyen & Dong Lin Loo, 2021. "The Potential of Sustainable Biomass Producer Gas as a Waste-to-Energy Alternative in Malaysia," Sustainability, MDPI, vol. 13(7), pages 1-31, April.
    11. Primaz, Carmem T. & Ribes-Greus, Amparo & Jacques, Rosângela A., 2021. "Valorization of cotton residues for production of bio-oil and engineered biochar," Energy, Elsevier, vol. 235(C).
    12. Kluska, Jacek & Turzyński, Tomasz & Ochnio, Mateusz & Kardaś, Dariusz, 2020. "Characteristics of ash formation in the process of combustion of pelletised leather tannery waste and hardwood pellets," Renewable Energy, Elsevier, vol. 149(C), pages 1246-1253.
    13. Yao, Xiwen & Zhao, Zhicheng & Li, Jishuo & Zhang, Bohan & Zhou, Haodong & Xu, Kaili, 2020. "Experimental investigation of physicochemical and slagging characteristics of inorganic constituents in ash residues from gasification of different herbaceous biomass," Energy, Elsevier, vol. 198(C).
    14. Qin, Fanzhi & Zhang, Chen & Zeng, Guangming & Huang, Danlian & Tan, Xiaofei & Duan, Abing, 2022. "Lignocellulosic biomass carbonization for biochar production and characterization of biochar reactivity," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    15. Sitek, Tomáš & Pospíšil, Jiří & Poláčik, Ján & Špiláček, Michal & Varbanov, Petar, 2019. "Fine combustion particles released during combustion of unit mass of beechwood," Renewable Energy, Elsevier, vol. 140(C), pages 390-396.
    16. Lei Han & Jinling Li & Chengtun Qu & Zhiguo Shao & Tao Yu & Bo Yang, 2022. "Recent Progress in Sludge Co-Pyrolysis Technology," Sustainability, MDPI, vol. 14(13), pages 1-12, June.
    17. Alam, Mahboob & Bhavanam, Anjireddy & Jana, Ashirbad & Viroja, Jaimin kumar S. & Peela, Nageswara Rao, 2020. "Co-pyrolysis of bamboo sawdust and plastic: Synergistic effects and kinetics," Renewable Energy, Elsevier, vol. 149(C), pages 1133-1145.
    18. Wang, Qian & Han, Kuihua & Wang, Peifu & Li, Shijie & Zhang, Mingyang, 2020. "Influence of additive on ash and combustion characteristics during biomass combustion under O2/CO2 atmosphere," Energy, Elsevier, vol. 195(C).
    19. Kawale, Harshal D. & Kishore, Nanda, 2019. "Production of hydrocarbons from a green algae (Oscillatoria) with exploration of its fuel characteristics over different reaction atmospheres," Energy, Elsevier, vol. 178(C), pages 344-355.
    20. Shangdiar, Sumarlin & Lin, Yuan-Chung & Cheng, Pei-Cheng & Chou, Feng-Chih & Wu, Wen-Ding, 2021. "Development of biochar from the refuse derived fuel (RDF) through organic / inorganic sludge mixed with rice straw and coconut shell," Energy, Elsevier, vol. 215(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220325056. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.