IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v171y2019icp721-730.html
   My bibliography  Save this article

Energy harvesting properties of the functionally graded flexoelectric microbeam energy harvesters

Author

Listed:
  • Qi, Lu

Abstract

Flexoelectricity may be an excellent candidate for piezoelectricity in micro and nano scaled energy harvesters due to its strong size dependency. In this paper, a size dependent analytical model of the cantilever-based functionally graded flexoelectric energy harvesters is developed. The Hamilton's principle is used to derive the governing equations. By means of the Galerkin's method, the approximated closed-form solutions of electrical output and energy conversion efficiency are obtained. For the functionally graded flexoelectric energy harvester, the effective flexoelectric response is controlled by not only the flexocoupling coefficient but also its first derivative. Numerical results of a 3 μm-thick Polyvinylidene Fluoride/Strontium Titanate composed functionally graded flexoelectric energy harvester demonstrate that when the volume fraction exponent varies from zero to infinity, the optimal working frequency gradually reduces from 41407 Hz to 7761 Hz and the optimal load resistance gradually increases from 0.99 MΩ to 83.91 MΩ. Meanwhile, shrinking the thickness from 3 μm to 0.3 μm will highly increase the normalized power density and the energy conversion efficiency about one and two orders, respectively. Moreover, when the strain gradient elastic coefficient becomes larger, the natural frequency will increase while the corresponding maximum electrical output will decrease.

Suggested Citation

  • Qi, Lu, 2019. "Energy harvesting properties of the functionally graded flexoelectric microbeam energy harvesters," Energy, Elsevier, vol. 171(C), pages 721-730.
    • Handle: RePEc:eee:energy:v:171:y:2019:i:c:p:721-730
    DOI: 10.1016/j.energy.2019.01.047
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219300490
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.01.047?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wong, Voon-Kean & Ho, Jee-Hou & Chai, Ai-Bao, 2017. "Performance of a piezoelectric energy harvester in actual rain," Energy, Elsevier, vol. 124(C), pages 364-371.
    2. Viet, N.V. & Xie, X.D. & Liew, K.M. & Banthia, N. & Wang, Q., 2016. "Energy harvesting from ocean waves by a floating energy harvester," Energy, Elsevier, vol. 112(C), pages 1219-1226.
    3. Wang, Wei & Cao, Junyi & Bowen, Chris R. & Zhou, Shengxi & Lin, Jing, 2017. "Optimum resistance analysis and experimental verification of nonlinear piezoelectric energy harvesting from human motions," Energy, Elsevier, vol. 118(C), pages 221-230.
    4. Xie, X.D. & Wang, Q. & Wang, S.J., 2015. "Energy harvesting from high-rise buildings by a piezoelectric harvester device," Energy, Elsevier, vol. 93(P2), pages 1345-1352.
    5. Azizi, Saber & Ghodsi, Ali & Jafari, Hamid & Ghazavi, Mohammad Reza, 2016. "A conceptual study on the dynamics of a piezoelectric MEMS (Micro Electro Mechanical System) energy harvester," Energy, Elsevier, vol. 96(C), pages 495-506.
    6. Zhou, Zhiyong & Qin, Weiyang & Zhu, Pei, 2017. "Harvesting acoustic energy by coherence resonance of a bi-stable piezoelectric harvester," Energy, Elsevier, vol. 126(C), pages 527-534.
    7. Jasim, Abbas & Wang, Hao & Yesner, Greg & Safari, Ahmad & Maher, Ali, 2017. "Optimized design of layered bridge transducer for piezoelectric energy harvesting from roadway," Energy, Elsevier, vol. 141(C), pages 1133-1145.
    8. Ilyas, Mohammad Adnan & Swingler, Jonathan, 2017. "Towards a prototype module for piezoelectric energy harvesting from raindrop impacts," Energy, Elsevier, vol. 125(C), pages 716-725.
    9. Kan, Junwu & Fu, Jiawei & Wang, Shuyun & Zhang, Zhonghua & Chen, Song & Yang, Can, 2017. "Study on a piezo-disk energy harvester excited by rotary magnets," Energy, Elsevier, vol. 122(C), pages 62-69.
    10. Wang, K.F. & Wang, B.L., 2018. "Energy gathering performance of micro/nanoscale circular energy harvesters based on flexoelectric effect," Energy, Elsevier, vol. 149(C), pages 597-606.
    11. Wei, Chongfeng & Jing, Xingjian, 2017. "A comprehensive review on vibration energy harvesting: Modelling and realization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 1-18.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ghodsi, Ali & Jafari, Hamid & Azizi, Saber & Ghazavi, Mohammad Reza, 2020. "On the dynamics of a novel energy harvester to convert the energy of the magnetic noise into electrical power," Energy, Elsevier, vol. 207(C).
    2. Wang, K.F. & Wang, B.L. & Li, J.E., 2020. "Electromechanical model of layered flexoelectric energy harvesters with strain gradient effect," Energy, Elsevier, vol. 191(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Feng & Sun, Xiuting & Xu, Jian, 2018. "A novel energy harvesting device for ultralow frequency excitation," Energy, Elsevier, vol. 151(C), pages 250-260.
    2. Ghodsi, Mojtaba & Ziaiefar, Hamidreza & Mohammadzaheri, Morteza & Al-Yahmedi, Amur, 2019. "Modeling and characterization of permendur cantilever beam for energy harvesting," Energy, Elsevier, vol. 176(C), pages 561-569.
    3. Fan, Kangqi & Cai, Meiling & Liu, Haiyan & Zhang, Yiwei, 2019. "Capturing energy from ultra-low frequency vibrations and human motion through a monostable electromagnetic energy harvester," Energy, Elsevier, vol. 169(C), pages 356-368.
    4. Wang, K.F. & Wang, B.L., 2018. "Energy gathering performance of micro/nanoscale circular energy harvesters based on flexoelectric effect," Energy, Elsevier, vol. 149(C), pages 597-606.
    5. Shan, Xiaobiao & Li, Hongliang & Yang, Yuancai & Feng, Ju & Wang, Yicong & Xie, Tao, 2019. "Enhancing the performance of an underwater piezoelectric energy harvester based on flow-induced vibration," Energy, Elsevier, vol. 172(C), pages 134-140.
    6. Turkmen, Anil Can & Celik, Cenk, 2018. "Energy harvesting with the piezoelectric material integrated shoe," Energy, Elsevier, vol. 150(C), pages 556-564.
    7. Zhou, Zhiyong & Qin, Weiyang & Zhu, Pei & Shang, Shijie, 2018. "Scavenging wind energy by a Y-shaped bi-stable energy harvester with curved wings," Energy, Elsevier, vol. 153(C), pages 400-412.
    8. Wang, Shuyun & Yang, Zemeng & Kan, Junwu & Chen, Song & Chai, Chaohui & Zhang, Zhonghua, 2021. "Design and characterization of an amplitude-limiting rotational piezoelectric energy harvester excited by a radially dragged magnetic force," Renewable Energy, Elsevier, vol. 177(C), pages 1382-1393.
    9. Hao, Guannan & Dong, Xiangwei & Li, Zengliang, 2021. "A novel piezoelectric structure for harvesting energy from water droplet: Theoretical and experimental studies," Energy, Elsevier, vol. 232(C).
    10. Wijewardhana, K. Rohana & Ekanayaka, Thilini K. & Jayaweera, E.N. & Shahzad, Amir & Song, Jang-Kun, 2018. "Integration of multiple bubble motion active transducers for improving energy-harvesting efficiency," Energy, Elsevier, vol. 160(C), pages 648-653.
    11. Madinei, H. & Haddad Khodaparast, H. & Friswell, M.I. & Adhikari, S., 2018. "Minimising the effects of manufacturing uncertainties in MEMS Energy harvesters," Energy, Elsevier, vol. 149(C), pages 990-999.
    12. Abdelkareem, Mohamed A.A. & Xu, Lin & Ali, Mohamed Kamal Ahmed & El-Daly, Abdel-Rahman B.M. & Hassan, Mohamed A. & Elagouz, Ahmed & Bo, Yang, 2019. "Analysis of the prospective vibrational energy harvesting of heavy-duty truck suspensions: A simulation approach," Energy, Elsevier, vol. 173(C), pages 332-351.
    13. Alluri, Nagamalleswara Rao & Selvarajan, Sophia & Chandrasekhar, Arunkumar & Saravanakumar, Balasubramaniam & Lee, Gae Myoung & Jeong, Ji Hyun & Kim, Sang-Jae, 2017. "Worm structure piezoelectric energy harvester using ionotropic gelation of barium titanate-calcium alginate composite," Energy, Elsevier, vol. 118(C), pages 1146-1155.
    14. Sultana, Ayesha & Alam, Md. Mehebub & Ghosh, Sujoy Kumar & Middya, Tapas Ranjan & Mandal, Dipankar, 2019. "Energy harvesting and self-powered microphone application on multifunctional inorganic-organic hybrid nanogenerator," Energy, Elsevier, vol. 166(C), pages 963-971.
    15. Chen, Jiayu & Qiu, Qiwen & Han, Yilong & Lau, Denvid, 2019. "Piezoelectric materials for sustainable building structures: Fundamentals and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 101(C), pages 14-25.
    16. Jasim, Abbas & Wang, Hao & Yesner, Greg & Safari, Ahmad & Maher, Ali, 2017. "Optimized design of layered bridge transducer for piezoelectric energy harvesting from roadway," Energy, Elsevier, vol. 141(C), pages 1133-1145.
    17. Kan, Junwu & Fu, Jiawei & Wang, Shuyun & Zhang, Zhonghua & Chen, Song & Yang, Can, 2017. "Study on a piezo-disk energy harvester excited by rotary magnets," Energy, Elsevier, vol. 122(C), pages 62-69.
    18. Salazar, R. & Serrano, M. & Abdelkefi, A., 2020. "Fatigue in piezoelectric ceramic vibrational energy harvesting: A review," Applied Energy, Elsevier, vol. 270(C).
    19. Yar, Adem, 2021. "High performance of multi-layered triboelectric nanogenerators for mechanical energy harvesting," Energy, Elsevier, vol. 222(C).
    20. Shi, Shuanhu & Li, Peng & Jin, Feng, 2019. "Thermal-mechanical-electrical analysis of a nano-scaled energy harvester," Energy, Elsevier, vol. 185(C), pages 862-874.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:171:y:2019:i:c:p:721-730. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.