IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v130y2017icp486-499.html
   My bibliography  Save this article

To promote radiation electrical MHD activation energy thermal extrusion manufacturing system efficiency by using Carreau-Nanofluid with parameters control method

Author

Listed:
  • Hsiao, Kai-Long

Abstract

In this study, a thermal energy extrusion system was made by an improved parameters effect controlling method to promote the manufacturing economic efficiency. The present investigation problem is composed of activation energy electrical MHD Ohmic dissipation and mixed convection of a viscoelastic non-Newtonian Carreau-Nanofluid on a stagnation-point energy conversion problem. The governing equations for thermal energy extrusion system are solved by analysis and implicit finite difference method. The thermal system is composed of flow velocity field, temperature field, mass diffusion field and heat conduction-convection field. The related important parameters have been produced as function of the fluid material parameter (λ), activation energy chemical reaction parameter (λA), Prandtl number (Pr) and mixed convection buoyancy parameters (Gc, Gt), etc. The results are shown that it will be provided greater thermal system effects with larger or lower values of those parameters, and have been divided six degree sequences to show their importance at this system. At last, it can be obtained a higher efficiency thermal energy extrusion system and can be promoted the system's economic efficiency.

Suggested Citation

  • Hsiao, Kai-Long, 2017. "To promote radiation electrical MHD activation energy thermal extrusion manufacturing system efficiency by using Carreau-Nanofluid with parameters control method," Energy, Elsevier, vol. 130(C), pages 486-499.
    • Handle: RePEc:eee:energy:v:130:y:2017:i:c:p:486-499
    DOI: 10.1016/j.energy.2017.05.004
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217307405
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.05.004?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Feng, Zhong-kai & Niu, Wen-jing & Cheng, Chun-tian & Liao, Sheng-li, 2017. "Hydropower system operation optimization by discrete differential dynamic programming based on orthogonal experiment design," Energy, Elsevier, vol. 126(C), pages 720-732.
    2. Abbas, Z. & Sheikh, M. & Motsa, S.S., 2016. "Numerical solution of binary chemical reaction on stagnation point flow of Casson fluid over a stretching/shrinking sheet with thermal radiation," Energy, Elsevier, vol. 95(C), pages 12-20.
    3. May, Gökan & Stahl, Bojan & Taisch, Marco, 2016. "Energy management in manufacturing: Toward eco-factories of the future – A focus group study," Applied Energy, Elsevier, vol. 164(C), pages 628-638.
    4. Mukherjee, Kankana, 2008. "Energy use efficiency in U.S. manufacturing: A nonparametric analysis," Energy Economics, Elsevier, vol. 30(1), pages 76-96, January.
    5. Cortell, Rafael, 2014. "MHD (magneto-hydrodynamic) flow and radiative nonlinear heat transfer of a viscoelastic fluid over a stretching sheet with heat generation/absorption," Energy, Elsevier, vol. 74(C), pages 896-905.
    6. Zhang, M.M. & Zhou, P. & Zhou, D.Q., 2016. "A real options model for renewable energy investment with application to solar photovoltaic power generation in China," Energy Economics, Elsevier, vol. 59(C), pages 213-226.
    7. Chen, Q. & Hammond, G.P. & Norman, J.B., 2016. "Energy efficiency potentials: Contrasting thermodynamic, technical and economic limits for organic Rankine cycles within UK industry," Applied Energy, Elsevier, vol. 164(C), pages 984-990.
    8. Raftari, Behrouz & Parvaneh, Foroud & Vajravelu, Kuppalapalle, 2013. "Homotopy analysis of the magnetohydrodynamic flow and heat transfer of a second grade fluid in a porous channel," Energy, Elsevier, vol. 59(C), pages 625-632.
    9. Jiaqiang, E. & Zuo, Wei & Liu, Xueling & Peng, Qingguo & Deng, Yuanwang & Zhu, Hao, 2016. "Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step," Applied Energy, Elsevier, vol. 175(C), pages 337-345.
    10. Apergis, Nicholas & Aye, Goodness C. & Barros, Carlos Pestana & Gupta, Rangan & Wanke, Peter, 2015. "Energy efficiency of selected OECD countries: A slacks based model with undesirable outputs," Energy Economics, Elsevier, vol. 51(C), pages 45-53.
    11. Hsiao, Kai-Long, 2013. "Energy conversion conjugate conduction–convection and radiation over non-linearly extrusion stretching sheet with physical multimedia effects," Energy, Elsevier, vol. 59(C), pages 494-502.
    12. Pintaldi, Sergio & Sethuvenkatraman, Subbu & White, Stephen & Rosengarten, Gary, 2017. "Energetic evaluation of thermal energy storage options for high efficiency solar cooling systems," Applied Energy, Elsevier, vol. 188(C), pages 160-177.
    13. Parker, Steven & Liddle, Brantley, 2016. "Energy efficiency in the manufacturing sector of the OECD: Analysis of price elasticities," Energy Economics, Elsevier, vol. 58(C), pages 38-45.
    14. Cassettari, Lucia & Bendato, Ilaria & Mosca, Marco & Mosca, Roberto, 2017. "Energy Resources Intelligent Management using on line real-time simulation: A decision support tool for sustainable manufacturing," Applied Energy, Elsevier, vol. 190(C), pages 841-851.
    15. Nataf, Kalen & Bradley, Thomas H., 2016. "An economic comparison of battery energy storage to conventional energy efficiency technologies in Colorado manufacturing facilities," Applied Energy, Elsevier, vol. 164(C), pages 133-139.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shafee, Ahmad & Muhammad, Taseer & Alsakran, Reem & Tlili, Iskander & Babazadeh, Houman & Khan, Umar, 2020. "Numerical examination for nanomaterial forced convection within a permeable cavity involving magnetic forces," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    2. Hayat, Tasawar & Masood, Faria & Qayyum, Sumaira & Alsaedi, Ahmed, 2020. "Sutterby fluid flow subject to homogeneous–heterogeneous reactions and nonlinear radiation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 544(C).
    3. Ahmed, Jawad & Khan, Masood & Ahmad, Latif, 2020. "Radiative heat flux effect in flow of Maxwell nanofluid over a spiraling disk with chemically reaction," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 551(C).
    4. Mir Asma & W.A.M. Othman & Taseer Muhammad, 2019. "Numerical Study for Darcy–Forchheimer Flow of Nanofluid due to a Rotating Disk with Binary Chemical Reaction and Arrhenius Activation Energy," Mathematics, MDPI, vol. 7(10), pages 1-16, October.
    5. Khan, Sami Ullah & Shehzad, Sabir Ali, 2020. "Electrical MHD Carreau nanofluid over porous oscillatory stretching surface with variable thermal conductivity: Applications of thermal extrusion system," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    6. Eid, Mohamed R. & Mahny, K.L. & Dar, Amanullah & Muhammad, Taseer, 2020. "Numerical study for Carreau nanofluid flow over a convectively heated nonlinear stretching surface with chemically reactive species," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 540(C).
    7. Muhammad, Taseer & Rafique, Kiran & Asma, Mir & Alghamdi, Metib, 2020. "Darcy–Forchheimer flow over an exponentially stretching curved surface with Cattaneo–Christov double diffusion," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 556(C).
    8. Khan, M. Ijaz & Khan, M. Waleed Ahmad & Alsaedi, A. & Hayat, T. & Khan, M. Imran, 2020. "Entropy generation optimization in flow of non-Newtonian nanomaterial with binary chemical reaction and Arrhenius activation energy," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    9. Ahmad, Manzoor & Muhammad, Taseer & Ahmad, Iftikhar & Aly, Shaban, 2020. "Time-dependent 3D flow of viscoelastic nanofluid over an unsteady stretching surface," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 551(C).
    10. Zeeshan, A. & Bhatti, M.M. & Muhammad, Taseer & Zhang, Lijun, 2020. "Magnetized peristaltic particle–fluid propulsion with Hall and ion slip effects through a permeable channel," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    11. Zhang, Kaiyu & Wang, Yibai & Tang, Haibin & Li, Yong & Wang, Baojun & York, Thomas M. & Yang, Lijun, 2020. "Two-dimensional analytical investigation into energy conversion and efficiency maximization of magnetohydrodynamic swirling flow actuators," Energy, Elsevier, vol. 209(C).
    12. Naqvi, Syed Muhammad Raza Shah & Muhammad, Taseer & Saleem, Salman & Kim, Hyun Min, 2020. "Significance of non-uniform heat generation/absorption in hydromagnetic flow of nanofluid due to stretching/shrinking disk," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 553(C).
    13. Fahd Almutairi & S.M. Khaled & Abdelhalim Ebaid, 2019. "MHD Flow of Nanofluid with Homogeneous-Heterogeneous Reactions in a Porous Medium under the Influence of Second-Order Velocity Slip," Mathematics, MDPI, vol. 7(3), pages 1-11, February.
    14. Hayat, Tasawar & Kanwal, Mehreen & Qayyum, Sumaira & Alsaedi, Ahmed, 2020. "Entropy generation optimization of MHD Jeffrey nanofluid past a stretchable sheet with activation energy and non-linear thermal radiation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 544(C).
    15. Saif, Rai Sajjad & Muhammad, Taseer & Sadia, Haleema & Ellahi, Rahmat, 2020. "Hydromagnetic flow of Jeffrey nanofluid due to a curved stretching surface," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 551(C).
    16. Hazarika, Silpi & Ahmed, Sahin & Chamkha, Ali J., 2021. "Investigation of nanoparticles Cu, Ag and Fe3O4 on thermophoresis and viscous dissipation of MHD nanofluid over a stretching sheet in a porous regime: A numerical modeling," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 182(C), pages 819-837.
    17. Ullah, Malik Zaka & Alshomrani, Ali Saleh & Alghamdi, Metib, 2020. "Significance of Arrhenius activation energy in Darcy–Forchheimer 3D rotating flow of nanofluid with radiative heat transfer," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    18. Salahuddin, T. & Siddique, Nazim & Arshad, Maryam, 2020. "Insight into the dynamics of the Non-Newtonian Casson fluid on a horizontal object with variable thickness," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 177(C), pages 211-231.
    19. Pardeep Kumar & Hemant Poonia & Liaqat Ali & Nehad Ali Shah & Jae Dong Chung, 2023. "Significance of Weissenberg Number, Soret Effect and Multiple Slips on the Dynamic of Biconvective Magnetohydrodynamic Carreau Nanofuid Flow," Mathematics, MDPI, vol. 11(7), pages 1-14, March.
    20. Ali, Mehboob & Khan, Waqar Azeem & Sultan, Faisal & Shahzad, Muhammad, 2020. "Numerical investigation on thermally radiative time-dependent Sisko nanofluid flow for curved surface," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    21. Ahmed Zeeshan & Nouman Ijaz & Tehseen Abbas & Rahmat Ellahi, 2018. "The Sustainable Characteristic of Bio-Bi-Phase Flow of Peristaltic Transport of MHD Jeffrey Fluid in the Human Body," Sustainability, MDPI, vol. 10(8), pages 1-17, July.
    22. Hayat, T. & Yaqoob, Rabiya & Qayyum, Sumaira & Alsaedi, A., 2020. "Entropy generation optimization in nanofluid flow by variable thicked sheet," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 551(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jebali, Eya & Essid, Hédi & Khraief, Naceur, 2017. "The analysis of energy efficiency of the Mediterranean countries: A two-stage double bootstrap DEA approach," Energy, Elsevier, vol. 134(C), pages 991-1000.
    2. Chen, Yu & Lin, Boqiang, 2021. "Understanding the green total factor energy efficiency gap between regional manufacturing—insight from infrastructure development," Energy, Elsevier, vol. 237(C).
    3. Lin, Boqiang & Chen, Yu, 2020. "Transportation infrastructure and efficient energy services: A perspective of China's manufacturing industry," Energy Economics, Elsevier, vol. 89(C).
    4. Favi, Claudio & Marconi, Marco & Mandolini, Marco & Germani, Michele, 2022. "Sustainable life cycle and energy management of discrete manufacturing plants in the industry 4.0 framework," Applied Energy, Elsevier, vol. 312(C).
    5. Demiral, Elif E. & Sağlam, Ümit, 2021. "Eco-efficiency and Eco-productivity assessments of the states in the United States: A two-stage Non-parametric analysis," Applied Energy, Elsevier, vol. 303(C).
    6. Boyd, Gale A. & Lee, Jonathan M., 2019. "Measuring plant level energy efficiency and technical change in the U.S. metal-based durable manufacturing sector using stochastic frontier analysis," Energy Economics, Elsevier, vol. 81(C), pages 159-174.
    7. Bashir, Muhammad Adnan & Sheng, Bin & Doğan, Buhari & Sarwar, Suleman & Shahzad, Umer, 2020. "Export product diversification and energy efficiency: Empirical evidence from OECD countries," Structural Change and Economic Dynamics, Elsevier, vol. 55(C), pages 232-243.
    8. Oleg Badunenko & Subal C. Kumbhakar, 2020. "Energy Intensity and Long- and Short-Term Efficiency in US Manufacturing Industry," Energies, MDPI, vol. 13(15), pages 1-21, August.
    9. Mardani, Abbas & Zavadskas, Edmundas Kazimieras & Streimikiene, Dalia & Jusoh, Ahmad & Khoshnoudi, Masoumeh, 2017. "A comprehensive review of data envelopment analysis (DEA) approach in energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1298-1322.
    10. Salahuddin, T. & Siddique, Nazim & Arshad, Maryam, 2020. "Insight into the dynamics of the Non-Newtonian Casson fluid on a horizontal object with variable thickness," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 177(C), pages 211-231.
    11. Paramati, Sudharshan Reddy & Shahzad, Umer & Doğan, Buhari, 2022. "The role of environmental technology for energy demand and energy efficiency: Evidence from OECD countries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    12. Zhang, Zhiguo & Zhao, Dan & Ni, Siliang & Sun, Yuze & Wang, Bing & Chen, Yong & Li, Guoneng & Li, S., 2019. "Experimental characterizing combustion emissions and thermodynamic properties of a thermoacoustic swirl combustor," Applied Energy, Elsevier, vol. 235(C), pages 463-472.
    13. Feng, Zhong-kai & Niu, Wen-jing & Wang, Wen-chuan & Zhou, Jian-zhong & Cheng, Chun-tian, 2019. "A mixed integer linear programming model for unit commitment of thermal plants with peak shaving operation aspect in regional power grid lack of flexible hydropower energy," Energy, Elsevier, vol. 175(C), pages 618-629.
    14. Casper Agaton, 2017. "Coal, Renewable, or Nuclear? A Real Options Approach to Energy Investments in the Philippines," International Journal of Sustainable Energy and Environmental Research, Conscientia Beam, vol. 6(2), pages 50-62.
    15. Qin, Quande & Li, Xin & Li, Li & Zhen, Wei & Wei, Yi-Ming, 2017. "Air emissions perspective on energy efficiency: An empirical analysis of China’s coastal areas," Applied Energy, Elsevier, vol. 185(P1), pages 604-614.
    16. Janardhana Reddy, G. & Kumar, Mahesh & Anwar Beg, O., 2018. "Effect of temperature dependent viscosity on entropy generation in transient viscoelastic polymeric fluid flow from an isothermal vertical plate," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 510(C), pages 426-445.
    17. Clara Inés Pardo Martínez, 2009. "Energy efficiency developments in the manufacturing industries of Germany and Colombia, 1998-2005," Serie de Documentos en Economía y Violencia 6144, Centro de Investigaciones en Violencia, Instituciones y Desarrollo Económico (VIDE).
    18. Lia Marchi & Ernesto Antonini, 2022. "Digital Atlas of Tactics to Designing Sustainable Factories," Sustainability, MDPI, vol. 14(7), pages 1-16, April.
    19. Jungmin An & Dong-Kwan Kim & Jinyeong Lee & Sung-Kwan Joo, 2021. "Least Squares Monte Carlo Simulation-Based Decision-Making Method for Photovoltaic Investment in Korea," Sustainability, MDPI, vol. 13(19), pages 1-14, September.
    20. Yuhong Wang & Lei Chen & Hong Zhou & Xu Zhou & Zongsheng Zheng & Qi Zeng & Li Jiang & Liang Lu, 2021. "Flexible Transmission Network Expansion Planning Based on DQN Algorithm," Energies, MDPI, vol. 14(7), pages 1-21, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:130:y:2017:i:c:p:486-499. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.