IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v324y2022ics0306261922010595.html
   My bibliography  Save this article

Green hydrogen production based on the co-combustion of wood biomass and porous media

Author

Listed:
  • Dai, Hongchao
  • Dai, Huaming

Abstract

The production of green hydrogen by utilizing wood pellets is an effective way to solve the problem of energy shortage and environmental pollution. In order to improve the hydrogen production efficiency of biomass, a co-combustion system of inert porous media and wood pellets was built, and the combustion characteristic of wood pellets was studied with different porous media structures. The results demonstrated that the increasing of air velocity was beneficial to increase the combustion temperature, and hydrogen production reached the maximum value at v = 4 cm/s. Meanwhile, the hydrogen production increased with the increasing of inert bed length due to the intensification of heat circulation. When the length ratio of the hybrid to inert bed was 6: 3, the lower heating value of syngas was 3.69 MJ/Nm3 and the molar fraction of hydrogen increased by 69 % compared to the single wood pellets combustion. Moreover, the decreasing of pellets diameter was conducive to increase syngas production. The co-combustion of inert porous media and wood pellets realized the efficient utilization of biomass, and maximum growth rate of hydrogen reached 142 %.

Suggested Citation

  • Dai, Hongchao & Dai, Huaming, 2022. "Green hydrogen production based on the co-combustion of wood biomass and porous media," Applied Energy, Elsevier, vol. 324(C).
    • Handle: RePEc:eee:appene:v:324:y:2022:i:c:s0306261922010595
    DOI: 10.1016/j.apenergy.2022.119779
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922010595
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2022.119779?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Peng, Qingguo & Xie, Bo & Yang, Wenming & Tang, Shihao & Li, Zhenwei & Zhou, Peng & Luo, Ningkang, 2021. "Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic," Renewable Energy, Elsevier, vol. 174(C), pages 391-402.
    2. Ahn, Joon & Kim, Hyouck Ju, 2020. "Combustion process of a Korean wood pellet at a low temperature," Renewable Energy, Elsevier, vol. 145(C), pages 391-398.
    3. Gianfelice, G. & Della Zassa, M. & Biasin, A. & Canu, P., 2019. "Onset and propagation of smouldering in pine bark controlled by addition of inert solids," Renewable Energy, Elsevier, vol. 132(C), pages 596-614.
    4. Shi, Junrui & Liu, Yongqi & Mao, Mingming & Lv, Jinsheng & Wang, Youtang & He, Fang, 2019. "Experimental and numerical studies on the effect of packed bed length on CO and NOx emissions in a plane-parallel porous combustor," Energy, Elsevier, vol. 181(C), pages 250-263.
    5. Dai, Huaming & Zhu, Huiwei, 2022. "Enhancement of partial oxidation reformer by the free-section addition for hydrogen production," Renewable Energy, Elsevier, vol. 190(C), pages 425-433.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Toledo, Mario & Arriagada, Andrés & Ripoll, Nicolás & Salgansky, Eugene A. & Mujeebu, Muhammad Abdul, 2023. "Hydrogen and syngas production by hybrid filtration combustion: Progress and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 177(C).
    2. Hao-Ran Wang & Tian-Tian Feng & Yan Li & Hui-Min Zhang & Jia-Jie Kong, 2022. "What Is the Policy Effect of Coupling the Green Hydrogen Market, National Carbon Trading Market and Electricity Market?," Sustainability, MDPI, vol. 14(21), pages 1-21, October.
    3. Liu, Hao & Li, Mi & Zhao, Shuna & Mensah, Rhoda Afriyie & Das, Oisik & Jiang, Lin & Xu, Qiang, 2023. "Insights into wood species and aging effects on pyrolysis characteristics and combustion model by multi kinetics methods and model constructions," Renewable Energy, Elsevier, vol. 206(C), pages 784-794.
    4. Dai, Huaming & Song, Ziwei & Wang, Hongting & Cui, Qingyuan, 2023. "Efficient production of hydrogen by catalytic decomposition of methane with Fe-substituted hexaaluminate coated packed bed," Energy, Elsevier, vol. 273(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Giuseppe Maggiotto & Gianpiero Colangelo & Marco Milanese & Arturo de Risi, 2023. "Thermochemical Technologies for the Optimization of Olive Wood Biomass Energy Exploitation: A Review," Energies, MDPI, vol. 16(19), pages 1-17, September.
    2. Chapela, Sergio & Cid, Natalia & Porteiro, Jacobo & Míguez, José Luis, 2020. "Numerical transient modelling of the fouling phenomena and its influence on thermal performance in a low-scale biomass shell boiler," Renewable Energy, Elsevier, vol. 161(C), pages 309-318.
    3. Xie, Bo & Peng, Qingguo & E, Jiaqiang & Tu, Yaojie & Wei, Jia & Tang, Shihao & Song, Yangyang & Fu, Guang, 2022. "Effects of CO addition and multi-factors optimization on hydrogen/air combustion characteristics and thermal performance based on grey relational analysis," Energy, Elsevier, vol. 255(C).
    4. Ye, Jiahao & E, Jiaqiang & Peng, Qingguo, 2023. "Effects of porosity setting and multilayers of diesel particulate filter on the improvement of regeneration performance," Energy, Elsevier, vol. 263(PE).
    5. Vershinina, Ksenia Yu & Dorokhov, Vadim V. & Romanov, Daniil S. & Strizhak, Pavel A., 2022. "Combustion stages of waste-derived blends burned as pellets, layers, and droplets of slurry," Energy, Elsevier, vol. 251(C).
    6. Zhang, Zhiqing & Lv, Junshuai & Xie, Guanglin & Wang, Su & Ye, Yanshuai & Huang, Gaohua & Tan, Donlgi, 2022. "Effect of assisted hydrogen on combustion and emission characteristics of a diesel engine fueled with biodiesel," Energy, Elsevier, vol. 254(PA).
    7. Chapela, S. & Porteiro, J. & Garabatos, M. & Patiño, D. & Gómez, M.A. & Míguez, J.L., 2019. "CFD study of fouling phenomena in small-scale biomass boilers: Experimental validation with two different boilers," Renewable Energy, Elsevier, vol. 140(C), pages 552-562.
    8. Luo, Jianbin & Liu, Zhonghang & Wang, Jie & Xu, Hongxiang & Tie, Yuanhao & Yang, Dayong & Zhang, Zhiqing & Zhang, Chengtao & Wang, Haijiao, 2022. "Investigation of hydrogen addition on the combustion, performance, and emission characteristics of a heavy-duty engine fueled with diesel/natural gas," Energy, Elsevier, vol. 260(C).
    9. Zangeneh, Vahid & Alipoor, Alireza, 2021. "Stability study of hydrogen-air flame in a conical porous burner," Energy, Elsevier, vol. 215(PB).
    10. Tang, Shihao & Wei, Jia & Xie, Bo & Shi, Zhiwei & Wang, Hao & Tian, Xinghua & He, Biao & Peng, Qingguo, 2023. "Experimental and numerical investigation on H2-fueled thermophotovoltaic micro tube with multi-cavity," Energy, Elsevier, vol. 274(C).
    11. Yin, Zibin & Cai, Wenwei & Zhang, Zhuo & Deng, Zijin & Li, Zhiyong, 2022. "Effects of hydrogen-rich products from methanol steam reforming on the performance enhancement of a medium-speed marine engine," Energy, Elsevier, vol. 256(C).
    12. Li, Jiangtao & Zhang, Zhiqing & Ye, Yanshuai & Li, Weiqing & Yuan, Tao & Wang, Haijiao & Li, Yongtao & Tan, Dongli & Zhang, Chengtao, 2022. "Effects of different injection timing on the performance, combustion and emission characteristics of diesel/ethanol/n-butanol blended diesel engine based on multi-objective optimization theory," Energy, Elsevier, vol. 260(C).
    13. Bianco, Vincenzo & Szubel, Mateusz & Matras, Beata & Filipowicz, Mariusz & Papis, Karolina & Podlasek, Szymon, 2021. "CFD analysis and design optimization of an air manifold for a biomass boiler," Renewable Energy, Elsevier, vol. 163(C), pages 2018-2028.
    14. Dai, Huaming & Song, Ziwei & Wang, Hongting & Cui, Qingyuan, 2023. "Efficient production of hydrogen by catalytic decomposition of methane with Fe-substituted hexaaluminate coated packed bed," Energy, Elsevier, vol. 273(C).
    15. Ye, Jiahao & Peng, Qingguo, 2023. "Improved emissions conversion of diesel oxidation catalyst using multifactor impact analysis and neural network," Energy, Elsevier, vol. 271(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:324:y:2022:i:c:s0306261922010595. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.