IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v286y2021ics0306261921000568.html
   My bibliography  Save this article

Enhancing thermal safety in lithium-ion battery packs through parallel cell ‘current dumping’ mitigation

Author

Listed:
  • Plunkett, Samuel T.
  • Chen, Chengxiu
  • Rojaee, Ramin
  • Doherty, Patrick
  • Sik Oh, Yun
  • Galazutdinova, Yana
  • Krishnamurthy, Mahesh
  • Al-Hallaj, Said

Abstract

This paper presents the first comprehensive study of a propagation mechanism referred to as ‘current dumping’, which has been identified as a dominant cause for thermal runaway in Lithium-ion battery packs. Baseline nail penetration tests were performed on commercial, fully charged lithium-ion battery packs with 18650 nickel-manganese-cobalt cells and Phase Change Composite to study the propagation of thermal runaway in packs with both electrically connected and disconnected cells. This study showed that packs with electrically connected cells experience thermal runaway propagation due to neighboring cell current dumping. Packs with electrically disconnected cells did not propagate and maximum neighboring cell temperatures were less than 85 °C, below the cell thermal runaway threshold temperatures characterized by accelerating rate calorimetry tests. Cell-to-cell current dumping tests were performed on 18650 and 21700 cells at 60, 80 and 100% state-of-charge. These tests demonstrated that cell current interrupt device activation times vary over several minutes, and trigger cell short resistance vary between 17 and 62 mΩ. Along with neighboring cell internal resistance data obtained from hybrid pulse power characterization testing, the current dumping study allowed accurate prediction of the magnitude of current dumping for various battery designs. This enabled the first battery design with individual cell fusing integrated into battery current collectors. Nail penetration tests performed on commercial 18650 battery packs incorporating the engineered fuse did not propagate and current dumping was prevented. Practical insights from this study can play a critical role in solving the thermal runaway propagation problem plaguing lithium-ion battery manufacturers globally.

Suggested Citation

  • Plunkett, Samuel T. & Chen, Chengxiu & Rojaee, Ramin & Doherty, Patrick & Sik Oh, Yun & Galazutdinova, Yana & Krishnamurthy, Mahesh & Al-Hallaj, Said, 2021. "Enhancing thermal safety in lithium-ion battery packs through parallel cell ‘current dumping’ mitigation," Applied Energy, Elsevier, vol. 286(C).
    • Handle: RePEc:eee:appene:v:286:y:2021:i:c:s0306261921000568
    DOI: 10.1016/j.apenergy.2021.116495
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921000568
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.116495?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zachary P. Cano & Dustin Banham & Siyu Ye & Andreas Hintennach & Jun Lu & Michael Fowler & Zhongwei Chen, 2018. "Batteries and fuel cells for emerging electric vehicle markets," Nature Energy, Nature, vol. 3(4), pages 279-289, April.
    2. Björn Nykvist & Måns Nilsson, 2015. "Rapidly falling costs of battery packs for electric vehicles," Nature Climate Change, Nature, vol. 5(4), pages 329-332, April.
    3. Donal P. Finegan & Mario Scheel & James B. Robinson & Bernhard Tjaden & Ian Hunt & Thomas J. Mason & Jason Millichamp & Marco Di Michiel & Gregory J. Offer & Gareth Hinds & Dan J.L. Brett & Paul R. Sh, 2015. "In-operando high-speed tomography of lithium-ion batteries during thermal runaway," Nature Communications, Nature, vol. 6(1), pages 1-10, November.
    4. Richard Schmuch & Ralf Wagner & Gerhard Hörpel & Tobias Placke & Martin Winter, 2018. "Performance and cost of materials for lithium-based rechargeable automotive batteries," Nature Energy, Nature, vol. 3(4), pages 267-278, April.
    5. Abdul-Manan, Amir F.N. & Won, Hyun-Woo & Li, Yang & Sarathy, S. Mani & Xie, Xiaomin & Amer, Amer A., 2020. "Bridging the gap in a resource and climate-constrained world with advanced gasoline compression-ignition hybrids," Applied Energy, Elsevier, vol. 267(C).
    6. Arno Kwade & Wolfgang Haselrieder & Ruben Leithoff & Armin Modlinger & Franz Dietrich & Klaus Droeder, 2018. "Current status and challenges for automotive battery production technologies," Nature Energy, Nature, vol. 3(4), pages 290-300, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Yu & Ren, Dongsheng & Feng, Xuning & Wang, Li & Ouyang, Minggao, 2022. "Thermal runaway modeling of large format high-nickel/silicon-graphite lithium-ion batteries based on reaction sequence and kinetics," Applied Energy, Elsevier, vol. 306(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Duffner, F. & Wentker, M. & Greenwood, M. & Leker, J., 2020. "Battery cost modeling: A review and directions for future research," Renewable and Sustainable Energy Reviews, Elsevier, vol. 127(C).
    2. Tang, Chen & Sprecher, Benjamin & Tukker, Arnold & Mogollón, José M., 2021. "The impact of climate policy implementation on lithium, cobalt and nickel demand: The case of the Dutch automotive sector up to 2040," Resources Policy, Elsevier, vol. 74(C).
    3. Yang, Chen, 2022. "Running battery electric vehicles with extended range: Coupling cost and energy analysis," Applied Energy, Elsevier, vol. 306(PB).
    4. Sun, Li & Sun, Wen & You, Fengqi, 2020. "Core temperature modelling and monitoring of lithium-ion battery in the presence of sensor bias," Applied Energy, Elsevier, vol. 271(C).
    5. Entwistle, Jake & Ge, Ruihuan & Pardikar, Kunal & Smith, Rachel & Cumming, Denis, 2022. "Carbon binder domain networks and electrical conductivity in lithium-ion battery electrodes: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    6. Schwab, Julia & Sölch, Christian & Zöttl, Gregor, 2022. "Electric Vehicle Cost in 2035: The impact of market penetration and charging strategies," Energy Economics, Elsevier, vol. 114(C).
    7. Marcin Połom & Maciej Tarkowski & Krystian Puzdrakiewicz & Łukasz Dopierała, 2020. "Is It Possible to Develop Electromobility in Urban Passenger Shipping in Post-Communist Countries? Evidence from Gdańsk, Poland," Energies, MDPI, vol. 13(23), pages 1-24, December.
    8. Andreas Ziegler & David Oeser & Thiemo Hein & Daniel Montesinos-Miracle & Ansgar Ackva, 2020. "Run to Failure: Aging of Commercial Battery Cells beyond Their End of Life," Energies, MDPI, vol. 13(8), pages 1-11, April.
    9. Jacek Paś, 2023. "Issues Related to Power Supply Reliability in Integrated Electronic Security Systems Operated in Buildings and Vast Areas," Energies, MDPI, vol. 16(8), pages 1-22, April.
    10. Duffner, Fabian & Mauler, Lukas & Wentker, Marc & Leker, Jens & Winter, Martin, 2021. "Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs," International Journal of Production Economics, Elsevier, vol. 232(C).
    11. Mozaffar Abdollahifar & Palanivel Molaiyan & Milena Perovic & Arno Kwade, 2022. "Insights into Enhancing Electrochemical Performance of Li-Ion Battery Anodes via Polymer Coating," Energies, MDPI, vol. 15(23), pages 1-28, November.
    12. Christian Thies & Karsten Kieckhäfer & Thomas S. Spengler, 2021. "Activity analysis based modeling of global supply chains for sustainability assessment," Journal of Business Economics, Springer, vol. 91(2), pages 215-252, March.
    13. Yang, Chen & Li, Peng & Yu, Jia & Zhao, Li-Da & Kong, Long, 2020. "Approaching energy-dense and cost-effective lithium–sulfur batteries: From materials chemistry and price considerations," Energy, Elsevier, vol. 201(C).
    14. Jingzhao Zhang & Yanan Wang & Benben Jiang & Haowei He & Shaobo Huang & Chen Wang & Yang Zhang & Xuebing Han & Dongxu Guo & Guannan He & Minggao Ouyang, 2023. "Realistic fault detection of li-ion battery via dynamical deep learning," Nature Communications, Nature, vol. 14(1), pages 1-8, December.
    15. Wang, Fujin & Zhao, Zhibin & Zhai, Zhi & Guo, Yanjie & Xi, Huan & Wang, Shibin & Chen, Xuefeng, 2023. "Feature disentanglement and tendency retainment with domain adaptation for Lithium-ion battery capacity estimation," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    16. Su, Xiaojia & Sun, Bingxiang & Wang, Jiaju & Zhang, Weige & Ma, Shichang & He, Xitian & Ruan, Haijun, 2022. "Fast capacity estimation for lithium-ion battery based on online identification of low-frequency electrochemical impedance spectroscopy and Gaussian process regression," Applied Energy, Elsevier, vol. 322(C).
    17. Xie, Peng & Jin, Lu & Qiao, Geng & Lin, Cheng & Barreneche, Camila & Ding, Yulong, 2022. "Thermal energy storage for electric vehicles at low temperatures: Concepts, systems, devices and materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    18. Mauler, Lukas & Duffner, Fabian & Leker, Jens, 2021. "Economies of scale in battery cell manufacturing: The impact of material and process innovations," Applied Energy, Elsevier, vol. 286(C).
    19. Malhotra, Abhishek & Zhang, Huiting & Beuse, Martin & Schmidt, Tobias, 2021. "How do new use environments influence a technology's knowledge trajectory? A patent citation network analysis of lithium-ion battery technology," Research Policy, Elsevier, vol. 50(9).
    20. Qian, Cheng & Xu, Binghui & Chang, Liang & Sun, Bo & Feng, Qiang & Yang, Dezhen & Ren, Yi & Wang, Zili, 2021. "Convolutional neural network based capacity estimation using random segments of the charging curves for lithium-ion batteries," Energy, Elsevier, vol. 227(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:286:y:2021:i:c:s0306261921000568. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.