IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v264y2020ics0306261920302038.html
   My bibliography  Save this article

Heat recovery and metal oxide particles trapping in a power generation system using a swirl-stabilized metal-air burner

Author

Listed:
  • Laraqui, Driss
  • Leyssens, Gontrand
  • Schonnenbeck, Cornelius
  • Allgaier, Olivier
  • Lomba, Ricardo
  • Dumand, Clément
  • Brilhac, Jean-François

Abstract

In order to tackle future challenges concerning zero greenhouse gases emissions, an innovative power generation system was designed and analyzed. It included a swirled-stabilized metal-air burner confined in a water-cooled combustion chamber, a secondary heat exchanger and a particle filtration system leading to a unique system of this kind. Magnesium particles in the range 50–70 µm were used as metal fuel. The effect of the swirl intensity was evaluated first on the flame position within the combustion chamber. As expected, the flame was stabilized closer to the burner head with the high swirl number than with the low one. To reach optimal heat to-mechanical conversion efficiency, an analysis of the heat recovery in the power generation system was performed. Experiments were conducted with a total chemical power ranging from 6 kW to 11 kW. Eighty percent of the power released by combustion were recovered in the power generation system and 50% in the combustion chamber. Ninety-eight percent of the magnesium oxide produced by combustion were trapped inside the system. Laser granulometry showed a number distribution for the metal oxide particles around 500 nm. Untrapped particles were measured by a Pegasor Particle Sensor (PPS), which was previously calibrated by comparison with measurements of the total suspended particles (TSP). Complementary TEM analysis confirmed that the metal oxide particles were aggregates of elementary submicron MgO cubic particles (10–1000 nm).

Suggested Citation

  • Laraqui, Driss & Leyssens, Gontrand & Schonnenbeck, Cornelius & Allgaier, Olivier & Lomba, Ricardo & Dumand, Clément & Brilhac, Jean-François, 2020. "Heat recovery and metal oxide particles trapping in a power generation system using a swirl-stabilized metal-air burner," Applied Energy, Elsevier, vol. 264(C).
    • Handle: RePEc:eee:appene:v:264:y:2020:i:c:s0306261920302038
    DOI: 10.1016/j.apenergy.2020.114691
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920302038
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.114691?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Garra, Patxi & Leyssens, Gontrand & Allgaier, Olivier & Schönnenbeck, Cornelius & Tschamber, Valérie & Brilhac, Jean-François & Tahtouh, Toni & Guézet, Olivier & Allano, Sylvain, 2017. "Magnesium/air combustion at pilot scale and subsequent PM and NOx emissions," Applied Energy, Elsevier, vol. 189(C), pages 578-587.
    2. Bergthorson, J.M. & Goroshin, S. & Soo, M.J. & Julien, P. & Palecka, J. & Frost, D.L. & Jarvis, D.J., 2015. "Direct combustion of recyclable metal fuels for zero-carbon heat and power," Applied Energy, Elsevier, vol. 160(C), pages 368-382.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chao Jin & Xiaodan Li & Teng Xu & Juntong Dong & Zhenlong Geng & Jia Liu & Chenyun Ding & Jingjing Hu & Ahmed El ALAOUI & Qing Zhao & Haifeng Liu, 2023. "Zero-Carbon and Carbon-Neutral Fuels: A Review of Combustion Products and Cytotoxicity," Energies, MDPI, vol. 16(18), pages 1-29, September.
    2. Janicka, J. & Debiagi, P. & Scholtissek, A. & Dreizler, A. & Epple, B. & Pawellek, R. & Maltsev, A. & Hasse, C., 2023. "The potential of retrofitting existing coal power plants: A case study for operation with green iron," Applied Energy, Elsevier, vol. 339(C).
    3. Trowell, K.A. & Goroshin, S. & Frost, D.L. & Bergthorson, J.M., 2020. "Aluminum and its role as a recyclable, sustainable carrier of renewable energy," Applied Energy, Elsevier, vol. 275(C).
    4. Kang, Dohyung & Lim, Hyun Suk & Lee, Minbeom & Lee, Jae W., 2018. "Syngas production on a Ni-enhanced Fe2O3/Al2O3 oxygen carrier via chemical looping partial oxidation with dry reforming of methane," Applied Energy, Elsevier, vol. 211(C), pages 174-186.
    5. Debiagi, P. & Rocha, R.C. & Scholtissek, A. & Janicka, J. & Hasse, C., 2022. "Iron as a sustainable chemical carrier of renewable energy: Analysis of opportunities and challenges for retrofitting coal-fired power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    6. Bozorg, Mehdi Vahabzadeh & Doranehgard, Mohammad Hossein & Hong, Kun & Xiong, Qingang & Li, Larry K.B., 2020. "A numerical study on discrete combustion of polydisperse magnesium aero-suspensions," Energy, Elsevier, vol. 194(C).
    7. Choi, Dongho & Oh, Jeong-Ik & Baek, Kitae & Lee, Jechan & Kwon, Eilhann E., 2018. "Compositional modification of products from Co-Pyrolysis of chicken manure and biomass by shifting carbon distribution from pyrolytic oil to syngas using CO2," Energy, Elsevier, vol. 153(C), pages 530-538.
    8. Bidabadi, Mehdi & Bozorg, Mehdi Vahabzadeh & Bordbar, Vahid, 2017. "A three-dimensional simulation of discrete combustion of randomly dispersed micron-aluminum particle dust cloud and applying genetic algorithm to obtain the flame front," Energy, Elsevier, vol. 140(P1), pages 804-817.
    9. Bergthorson, Jeffrey M. & Yavor, Yinon & Palecka, Jan & Georges, William & Soo, Michael & Vickery, James & Goroshin, Samuel & Frost, David L. & Higgins, Andrew J., 2017. "Metal-water combustion for clean propulsion and power generation," Applied Energy, Elsevier, vol. 186(P1), pages 13-27.
    10. Maas, Pascal & Schiemann, Martin & Scherer, Viktor & Fischer, Peter & Taroata, Dan & Schmid, Günther, 2018. "Lithium as energy carrier: CFD simulations of LI combustion in a 100MW slag tap furnace," Applied Energy, Elsevier, vol. 227(C), pages 506-515.
    11. Dehhaghi, Mona & Kazemi Shariat Panahi, Hamed & Aghbashlo, Mortaza & Lam, Su Shiung & Tabatabaei, Meisam, 2021. "The effects of nanoadditives on the performance and emission characteristics of spark-ignition gasoline engines: A critical review with a focus on health impacts," Energy, Elsevier, vol. 225(C).
    12. Julien Pedneault & Guillaume Majeau‐Bettez & Manuele Margni, 2023. "How much sorting is required for a circular low carbon aluminum economy?," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 977-992, June.
    13. Schiemann, Martin & Bergthorson, Jeffrey & Fischer, Peter & Scherer, Viktor & Taroata, Dan & Schmid, Günther, 2016. "A review on lithium combustion," Applied Energy, Elsevier, vol. 162(C), pages 948-965.
    14. Garra, Patxi & Leyssens, Gontrand & Allgaier, Olivier & Schönnenbeck, Cornelius & Tschamber, Valérie & Brilhac, Jean-François & Tahtouh, Toni & Guézet, Olivier & Allano, Sylvain, 2017. "Magnesium/air combustion at pilot scale and subsequent PM and NOx emissions," Applied Energy, Elsevier, vol. 189(C), pages 578-587.
    15. Zhang, Jiarui & Xia, Zhixun & Ma, Likun & Huang, Liya & Feng, Yunchao & Yang, Dali, 2021. "Experimental study on aluminum particles combustion in a turbulent jet," Energy, Elsevier, vol. 214(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:264:y:2020:i:c:s0306261920302038. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.