IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v225y2018icp52-59.html
   My bibliography  Save this article

Driving force of the better performance of metal-doped carbonaceous anodes in microbial fuel cells

Author

Listed:
  • Mateo, Sara
  • Cañizares, Pablo
  • Rodrigo, Manuel Andrés
  • Fernandez-Morales, Francisco Jesus

Abstract

A comparison between different metal-doped carbonaceous anodes for air-breathing microbial fuel cells (MFCs) has been carried out in this work. In order to do that, the surface of carbon paper anodes were modified with Pt, Au and Ni. The current generated was higher when using these metal-doped anodes, exerting up to 7.4 A m−2 more than when using non-doped ones. Polarization curves results in a great performance of the Ni reaching 2.92 W m−2 at the steady state, followed by 0.99 W m−2 of the Au and 0.52 W m−2 of the Pt. Additionally, from the mathematical fitting of a model to the experimental data of a polarization curve, it was observed that the mechanism that explains the better performance of the metal doped anodes was the reduction of the mass transfer limitations. In this sense, the addition of metal on the anodes increase the threshold current density causing mass transfer limitations, reducing also the significance of the mass transfer limitations when the cells are operated under conditions in which the process is diffusion controlled.

Suggested Citation

  • Mateo, Sara & Cañizares, Pablo & Rodrigo, Manuel Andrés & Fernandez-Morales, Francisco Jesus, 2018. "Driving force of the better performance of metal-doped carbonaceous anodes in microbial fuel cells," Applied Energy, Elsevier, vol. 225(C), pages 52-59.
    • Handle: RePEc:eee:appene:v:225:y:2018:i:c:p:52-59
    DOI: 10.1016/j.apenergy.2018.05.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918307098
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.05.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Panpan & Liang, Peng & Jiang, Yong & Hao, Wen & Miao, Bo & Wang, Donglin & Huang, Xia, 2018. "Stimulated electron transfer inside electroactive biofilm by magnetite for increased performance microbial fuel cell," Applied Energy, Elsevier, vol. 216(C), pages 382-388.
    2. Walter, Xavier Alexis & Stinchcombe, Andrew & Greenman, John & Ieropoulos, Ioannis, 2017. "Urine transduction to usable energy: A modular MFC approach for smartphone and remote system charging," Applied Energy, Elsevier, vol. 192(C), pages 575-581.
    3. Hindatu, Y. & Annuar, M.S.M. & Gumel, A.M., 2017. "Mini-review: Anode modification for improved performance of microbial fuel cell," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 236-248.
    4. Cai, Weiwei & Liu, Wenzong & Sun, Haishu & Li, Jiaqi & Yang, Liming & Liu, Meijun & Zhao, Shenlong & Wang, Aijie, 2018. "Ni5P4-NiP2 nanosheet matrix enhances electron-transfer kinetics for hydrogen recovery in microbial electrolysis cells," Applied Energy, Elsevier, vol. 209(C), pages 56-64.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Massaglia, Giulia & Margaria, Valentina & Sacco, Adriano & Tommasi, Tonia & Pentassuglia, Simona & Ahmed, Daniyal & Mo, Roberto & Pirri, Candido Fabrizio & Quaglio, Marzia, 2018. "In situ continuous current production from marine floating microbial fuel cells," Applied Energy, Elsevier, vol. 230(C), pages 78-85.
    2. Marks, Stanislaw & Makinia, Jacek & Fernandez-Morales, Francisco Jesus, 2019. "Performance of microbial fuel cells operated under anoxic conditions," Applied Energy, Elsevier, vol. 250(C), pages 1-6.
    3. Modestra, J. Annie & Reddy, C. Nagendranatha & Krishna, K. Vamshi & Min, Booki & Mohan, S. Venkata, 2020. "Regulated surface potential impacts bioelectrogenic activity, interfacial electron transfer and microbial dynamics in microbial fuel cell," Renewable Energy, Elsevier, vol. 149(C), pages 424-434.
    4. Gajda, Iwona & Greenman, John & Ieropoulos, Ioannis, 2020. "Microbial Fuel Cell stack performance enhancement through carbon veil anode modification with activated carbon powder," Applied Energy, Elsevier, vol. 262(C).
    5. Szymon Potrykus & Sara Mateo & Janusz Nieznański & Francisco Jesús Fernández-Morales, 2020. "The Influent Effects of Flow Rate Profile on the Performance of Microbial Fuel Cells Model," Energies, MDPI, vol. 13(18), pages 1-15, September.
    6. Mateo, S. & Cantone, A. & Cañizares, P. & Fernández-Morales, F.J. & Scialdone, O. & Rodrigo, M.A., 2018. "On the staking of miniaturized air-breathing microbial fuel cells," Applied Energy, Elsevier, vol. 232(C), pages 1-8.
    7. Liu, Shu-Hui & Lai, Yu-Chuan & Lin, Chi-Wen, 2019. "Enhancement of power generation by microbial fuel cells in treating toluene-contaminated groundwater: Developments of composite anodes with various compositions," Applied Energy, Elsevier, vol. 233, pages 922-929.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dawid Nosek & Piotr Jachimowicz & Agnieszka Cydzik-Kwiatkowska, 2020. "Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells," Energies, MDPI, vol. 13(24), pages 1-22, December.
    2. Aritro Banerjee & Rajnish Kaur Calay & Mohamad Mustafa, 2022. "Review on Material and Design of Anode for Microbial Fuel Cell," Energies, MDPI, vol. 15(6), pages 1-17, March.
    3. Tajdid Khajeh, Rana & Aber, Soheil & Zarei, Mahmoud, 2020. "Comparison of NiCo2O4, CoNiAl-LDH, and CoNiAl-LDH@NiCo2O4 performances as ORR catalysts in MFC cathode," Renewable Energy, Elsevier, vol. 154(C), pages 1263-1271.
    4. Sekar, Aiswarya Devi & Jayabalan, Tamilmani & Muthukumar, Harshiny & Chandrasekaran, Nivedhini Iswarya & Mohamed, Samsudeen Naina & Matheswaran, Manickam, 2019. "Enhancing power generation and treatment of dairy waste water in microbial fuel cell using Cu-doped iron oxide nanoparticles decorated anode," Energy, Elsevier, vol. 172(C), pages 173-180.
    5. Liping Fan & Yaobin Xi, 2021. "Effect of Polypyrrole-Fe 3 O 4 Composite Modified Anode and Its Electrodeposition Time on the Performance of Microbial Fuel Cells," Energies, MDPI, vol. 14(9), pages 1-10, April.
    6. Shahid, Kanwal & Ramasamy, Deepika Lakshmi & Haapasaari, Sampo & Sillanpää, Mika & Pihlajamäki, Arto, 2021. "Stainless steel and carbon brushes as high-performance anodes for energy production and nutrient recovery using the microbial nutrient recovery system," Energy, Elsevier, vol. 233(C).
    7. Mateo, S. & Cantone, A. & Cañizares, P. & Fernández-Morales, F.J. & Scialdone, O. & Rodrigo, M.A., 2018. "On the staking of miniaturized air-breathing microbial fuel cells," Applied Energy, Elsevier, vol. 232(C), pages 1-8.
    8. de Ramón-Fernández, A. & Salar-García, M.J. & Ruiz Fernández, D. & Greenman, J. & Ieropoulos, I.A., 2020. "Evaluation of artificial neural network algorithms for predicting the effect of the urine flow rate on the power performance of microbial fuel cells," Energy, Elsevier, vol. 213(C).
    9. Chao Liu & Yue Yin & Chuang Chen & Xuemeng Zhang & Jing Zhou & Qingran Zhang & Yinguang Chen, 2023. "Advances in Electricity-Steering Organic Waste Bio-Valorization for Medium Chain Carboxylic Acids Production," Energies, MDPI, vol. 16(6), pages 1-22, March.
    10. Tan, Weng Cheong & Saw, Lip Huat & Thiam, Hui San & Xuan, Jin & Cai, Zuansi & Yew, Ming Chian, 2018. "Overview of porous media/metal foam application in fuel cells and solar power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 181-197.
    11. Sami G. A. Flimban & Iqbal M. I. Ismail & Taeyoung Kim & Sang-Eun Oh, 2019. "Overview of Recent Advancements in the Microbial Fuel Cell from Fundamentals to Applications: Design, Major Elements, and Scalability," Energies, MDPI, vol. 12(17), pages 1-20, September.
    12. Fischer, Fabian & Sugnaux, Marc & Savy, Cyrille & Hugenin, Gérald, 2018. "Microbial fuel cell stack power to lithium battery stack: Pilot concept for scale up," Applied Energy, Elsevier, vol. 230(C), pages 1633-1644.
    13. de Ramón-Fernández, Alberto & Salar-García, M.J. & Ruiz-Fernández, Daniel & Greenman, J. & Ieropoulos, I., 2019. "Modelling the energy harvesting from ceramic-based microbial fuel cells by using a fuzzy logic approach," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    14. Wang, Chin-Tsan & Lee, Yao-Cheng & Ou, Yun-Ting & Yang, Yung-Chin & Chong, Wen-Tong & Sangeetha, Thangavel & Yan, Wei-Mon, 2017. "Exposing effect of comb-type cathode electrode on the performance of sediment microbial fuel cells," Applied Energy, Elsevier, vol. 204(C), pages 620-625.
    15. Liu, Shu-Hui & Lai, Yu-Chuan & Lin, Chi-Wen, 2019. "Enhancement of power generation by microbial fuel cells in treating toluene-contaminated groundwater: Developments of composite anodes with various compositions," Applied Energy, Elsevier, vol. 233, pages 922-929.
    16. Yan-Ming Chen & Chin-Tsan Wang & Yung-Chin Yang, 2018. "Effect of Wall Boundary Layer Thickness on Power Performance of a Recirculation Microbial Fuel Cell," Energies, MDPI, vol. 11(4), pages 1-11, April.
    17. Xu, Haitao & Du, Yanan & Chen, Ye & Wen, Qing & Lin, Cunguo & Zheng, Jiyong & Qiu, Zhenghui, 2022. "Electricity generation in simulated benthic microbial fuel cell with conductive polyaniline-polypyrole composite hydrogel anode," Renewable Energy, Elsevier, vol. 183(C), pages 242-250.
    18. Roustazadeh Sheikhyousefi, P. & Nasr Esfahany, M. & Colombo, A. & Franzetti, A. & Trasatti, S.P. & Cristiani, P., 2017. "Investigation of different configurations of microbial fuel cells for the treatment of oilfield produced water," Applied Energy, Elsevier, vol. 192(C), pages 457-465.
    19. Lu, Zhihao & Yin, Di & Chen, Peng & Wang, Hongzhen & Yang, Yuhang & Huang, Guangtuan & Cai, Lankun & Zhang, Lehua, 2020. "Power-generating trees: Direct bioelectricity production from plants with microbial fuel cells," Applied Energy, Elsevier, vol. 268(C).
    20. Gajda, Iwona & Greenman, John & Ieropoulos, Ioannis, 2020. "Microbial Fuel Cell stack performance enhancement through carbon veil anode modification with activated carbon powder," Applied Energy, Elsevier, vol. 262(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:225:y:2018:i:c:p:52-59. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.